Ghost MV1 User manual

BATTERY AND TEMPERATURES
Pressand hold the Mode Button to display battery level. Releasethen press and hold
again to display current heat setting, indicated by flashing LEDs.Pressthe Mode Button
repeatedly to cycle through preset temperatures .
BATTERY
3 green LEDsindicates full, with 1flashing
green LEDindicating it's lime to recharge.
If the battery is too low to be used, the
device will vibrate 3 times with a single
flashing red LEDdisplayed.
TEMPERATURES
When using dry herbs, 2 flashing amber
LEDs is the default heat setting. To
increase vapor intensity select one of the
higher presets. Forlighter vapor reduce to
low, indicated by 1 amber LED. The
concentrate preset is indicated by 3
flashing red LEDsand should not be used
for herbs.
Toedit the temperatures of the 2 favorite settings and unlock
increased functionality , download the GHOSTApp,

BEFORE FIRST USE
IMPORTANT :
Charge the battery fully
before initial use.If using the supplied USB
cable, charge overnight until the red LED
goes out. You can also use the MVl Fast
Charger (sold separately) for this initial
chargewhich should
takeno more than 2
hours.Failureto fully
charge the battery
may permanently
reduce its capacity
and lifespan.
LOADING
Slidelatch releaseto
open door, remove
crucible and load
with material (if
using concentrates,
insert pad first). For
dry herb, grind to a
coarse consistency
and load crucible
loosely, level to the top. Fit crucible lid
securely and return to the unit ensuring
there are no gaps between the lid and
crucible as you close the door.
SWITCHING ON
Your MVl arrives in
Shipping Mode and is
presetfor usewith dry
herbs. To activate the
unit,pressand holdthe
Mode Button until a
singlegreenLEDshows,
then release and the
current battery level
will be displayed. The
unit will now wait in SleepMode.
'/ If the battery is removed and replaced,
I
I, you will need to switch the device on as
above.
PREPARING FOR USE
Extend the mouthpiece
by between ½and¾ of an
inch. IMPORTANT: rest
your thumb on the top of
the heatsinkto ensure it
remains level with the top
of the device once the
mouthpiece is extended.
Triple click the Mode
Button to activate Vape
Mode, a single green
LED will display. After
several minutesof inactivity
the device will return to
SleepMode.

VAPING - DRY HERBS
In Vape Mode, press and hold
the Vape Button for several
seconds, until you feel a long
buzz meaning it's time to vape.
Continue to hold the Vape
Button and inhale for at least 10
seconds · the longer the draw,
the more intense the flavor.
Release the Vape Butt on when
done and repeat as desired .
VA PING - CONCENTRATES
Select temperature setting for
concentrates and when in Vape
Mode, press and hold the Vape
Button. You will feel a long buzz;
immediately begin inhaling and
continue until you feel a second
long buzz. This prepares the
concentrate for use and a single
amber LED will be displayed
indicating that you are in
Concentrate Mode. When ready,
press and hold the Vape Button
again and immediately inhale for
at least 10 seconds, releasing
when done. Repeatas desired.