Gianni Industries GPS-3A User manual

Speci
mounted steel fabricated case with lift-off hinged front panel.
In the event of a mains power failure, standby power is
automatically provided from battery charging output. The
models are consisted a simple output and a built-in adjustable
timer module (PSU-200)for application of door relocking on
fail safe ( Power to lock) or fail secure (power to unlock)
locking devices.
Gianni power supplies are housed in a robust, compact wall
GPS-2A
PSU-200
PSU-100-230-12
PSU100-UL
*Power Input: 120VAC(or 230VAC)
*Box Dimension : 225(H)*244(W)*86(D)mm
*Short Circuit protection
*Out put: 8~16VDC,24W,12VDC
*Filtered & regulated DC output
*Rechargeable Battery
*LED indicates power supply status
*Power Input: 120VAC(or 230VAC)
*Box Dimension : 210(H)*220(W)*80(D)mm
*Short Circuit protection
*Adjustable Timer module: 1~30 seconds
*Output: 8~16VDC
*Build-in backup battery Charger for Uninterruptible
*UL Listed for US and Canada
ower C
*Box Dimension : 210(H)*220(W)*80(D)mm
*Short Circuit protection
*Specify Out put: 12VDC
*Build-in backup battery Charger for Uninterruptible
*P Input:120VA
*Power Input: 120VAC (or 230 VAC)
*Box Dimension : 210(H)*220(W)*80(D)mm
*Short Circuit protection
*Out put: 12VDC
*Rechargeable Battery
E-229191 E-910352
Uninterruptible
Power Supply
1
23
456
789
0
*#
Reader
(outdoor)
Lock Door Loop
Micro Switch Bar
Power Supply Unit
Statement
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-GPS Ver. D Published on 2010.03.11
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw

The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Power Supply Unit
DBR-200 Relay Module
The DBR-200 Relay module is worked when power input then
contacts will change over from N/C (Normally Close) to N/O
(Normally Open)
Link Wire
Cut if over 24volts
Cut if over 18volts
Link Wire
Com.
N/C
N/O
N/O
Com.
N/C
Input
AC or DC
RELAY
Form 1
Form 2
12TBU-5
PB NO GND NC
16VAC In put
12VDC Outp ut
Relocking contact
Lock Device
Fail-safe
Power to lock
Lock Device
Fail-secure
Power to unlock
Battery(Option)
Access control
(Request-to-exit )
(Outdoor)
(Indoor)
Push Button
(N/O)
PSU-200
Shorted
Relay
Voltage Adjust
(8~16VDC)
Fuse 2A
Fuse 2A
1~30seconds
relocking time delay
Connecting Diagram Optional Accessories
Power Input: 8~30VAC, 11~30VDC
Current Draw: 45mA/12VDC
Relay rating: 5A/24VAC , 5A/30VDC
Cut off this wire when
a p p l y i n p u t v o l t a g e
above 18 VDC to avoid
burn of relay.
Cut off this wire when
a p p l y i n p u t v o l t a g e
above 24 VDC to avoid
burn of relay.
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-GPS Ver. D Published on 2010.03.11
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw