Gianni Industries CP-15 Series User manual

The CP-15 series , with single pole
change over contacts from N/C to N/O. The main function is to
override the electrical locking/release devices in case of
emergency. With Key to replace glass or reset unit.
Break Glass call point
The Break Glass call point comes with hinged front cover &
no needs to power in contact switch for monitoring N/C
change over N/O to override electrical locks / release devices
for emergency with key to replace glass.
Dimensions: 88x88x52 mm
Contact Resistance: 150mΩ
Switch rated: 3A@125VAC~
Unit: mm
(Common Europe Sized)
Built-in Key
(for change break glass)
Polycarbonate
Hinged Cover
EMERGENCY
DOOR RELEASE
EMERGENCY
DOOR RELEASE
BREAK GLASS
PRESS HERE
88
52
88
(Glass is broken)
Electromagnetic
locks (locked)
EM locks
Alarm
1
2
3
Electromagnetic
locks (Unlocked)
Alarm
1
2
3
CP-15-GE
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: [phone] FAX: [phone]
E-Mail: [email protected]
Website: gianni.tw
Copyright © 2008 Gianni industries, inc. All rights reserved.
DM-CA-CP-15 Ver. B Published on 2008.04.29
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GP001
Statement
Dimension
Application
Warranty
Specifications
Break Glass call point