GIGA-BYTE TECHNOLOGY R282-P92 User manual

R282-P92
Ampere® Altra® Max ARM GPU Server - 2U DP 12-Bay
User Manual
Rev. 1.0

Copyright
© 2022 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specications and features in this manual may be made by GIGABYTE without
prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of documentation:
 User Manual: detailed information & steps about the installation, conguration and use of this
product (e.g. motherboard, server barebones), covering hardware and BIOS.

User Guide: detailed information about the installation & use of an add-on hardware or
software component (e.g. BMC rmware, rail-kit) compatible with this product.
Quick Installation Guide: a short guide with visual diagrams that you can reference easily for
installation purposes of this product (e.g. motherboard, server barebones).
Please see the support section of the online product page to check the current availability of these
documents.
For More Information
For related product specications, the latest rmware and software, and other information please visit our website at
http://www.gigabyte.com
For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our reseller
portal: http://reseller.b2b.gigabyte.com
For further technical assistance, please contact your GIGABYTE representative or visit
https://esupport.gigabyte.com/ to create a new support ticket
For any general sales or marketing enquiries, you may also message GIGABYTE server directly by email:
server[email protected]

Conventions
The following conventions are used in this user's guide:
NOTE!
Gives bits and pieces of additional
information related to the current topic.
CAUTION!
Gives precautionary measures to
avoid possible hardware or software problems.
WARNING!
Alerts you to any damage that might
result from doing or not doing specic actions.

Server Warnings and Cautions
Before installing a server, be sure that you understand the following warnings and cautions.
WARNING!
To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
• Unplug all the power cords from the power supplies to disconnect power to the equipment.
• Shock Hazard! Disconnect all power supply cords before servicing.
• Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the server.
WARNING!
To reduce the risk of personal injury from hot surfaces, allow the drives
and the internal system components to cool before touching them.
WARNING!
This server is equipped with high speed fans. Keep away from hazardous
moving fan blades during servicing.
WARNING!
This equipment is not suitable for use in locations where children are
likely to be present.
WARNING!
This equipment is intended to be used in Restrict Access Location. The
access can only be gained by Skilled person.
Only authorized by well trained professional person can access the
restrict access location.
CAUTION!
• Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airow and improper cooling that can
lead to thermal damage.
• Danger of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Dispose of used batteries according to the manufacturer’s instructions.

Electrostatic Discharge (ESD)
CAUTION!
ESD CAN DAMAGE DRIVES, BOARDS, AND OTHER PARTS. WE RECOMMEND THAT YOU
PERFORM ALL PROCEDURES AT AN ESD WORKSTATION. IF ONE IS NOT AVAILABLE,
PROVIDE SOME ESD PROTECTION BY WEARING AN ANTI-STATIC WRIST STRAP AT-
TACHED TO CHASSIS GROUND -- ANY UNPAINTED METAL SURFACE -- ON YOUR SERVER
WHEN HANDLING PARTS.
Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by
their edges without any component and pin touching. After removing a board from its protective
wrapper or from the system, place the board component side up on a grounded, static free sur-
face. Use a conductive foam pad if available but not the board wrapper. Do not slide board over
any surface.
System power on/o󰀨: To remove power from system, you must remove the system from
rack. Make sure the system is removed from the rack before opening the chassis, adding, or
removing any non hot-plug components.
Hazardous conditions, devices and cables: Hazardous electrical conditions may be
present on power, telephone, and communication cables. Turn off the system and disconnect the
cables attached to the system before servicing it. Otherwise, personal injury or equipment dam-
age can result.
Electrostatic discharge (ESD) and ESD protection: ESD can damage drives,
boards, and other parts. We recommend that you perform all procedures in this chapter only at
an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic
wrist strap attached to chassis ground (any unpainted metal surface on the server) when handling
parts.
ESD and handling boards: Always handle boards carefully. They can be extremely
sensitive to electrostatic discharge (ESD). Hold boards only by their edges. After removing a
board from its protective wrapper or from the system, place the board component side up on a
grounded, static free surface. Use a conductive foam pad if available but not the board wrapper.
Do not slide board over any surface.
Installing or removing jumpers: A jumper is a small plastic encased conductor that slips
over two jumper pins. Some jumpers have a small tab on top that can be gripped with ngertips
or with a pair of ne needle nosed pliers. If the jumpers do not have such a tab, take care when
using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with
the pliers, never the wide sides. Gripping the wide sides can dam-age the contacts inside the
jumper, causing intermittent problems with the function con-trolled by that jumper. Take care to
grip with, but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the
board may bend or break.

CAUTION!
Risk of explosion if battery is replaced incorrectly or with an incorrect type. Replace the battery
only with the same or equivalent type recommended by the manufacturer. Dispose of used bat-
teries according to the manufacturer’s instructions.

- 7 -
Table of Contents
Chapter 1 Hardware Installation .....................................................................................9
1-1 Installation Precautions.................................................................................... 9
1-2 Product Specications.................................................................................... 10
1-3 System Block Diagram................................................................................... 14
Chapter 2 System Appearance.....................................................................................15
2-1 Front View...................................................................................................... 15
2-2 Rear View....................................................................................................... 15
2-3 Front Panel LEDs and Buttons....................................................................... 16
2-4 Power Supply Unit LED.................................................................................. 17
2-5 Hard Disk Drive LEDs .................................................................................... 18
Chapter 3 System Hardware Installation ......................................................................19
3-1 System Componenmts................................................................................... 20
3-2 Removing and Installing the Chassis Cover .................................................. 21
3-3 Removing and Installing the Fan Duct ........................................................... 22
3-4 Removing and Installing the Heat Sink .......................................................... 23
3-5 Removing and Installing the CPU .................................................................. 24
3-6 Removing and Installing Memory................................................................... 25
3-6-1 Eight-Channel Memory Conguration ....................................................................25
3-6-2 Removing and Installing a Memory Module ...........................................................26
3-6-3 Processor and Memory Module Matrix Table .........................................................27
3-7 Removing and Installing the PCIe Card......................................................... 28
3-8 Removing and Installing the Hard Disk Drive................................................. 30
3-9 Replacing the Fan Assembly.......................................................................... 31
3-10 Removing and Installing the Power Supply.................................................... 32
3-11 Installing and Removing an M.2 Solid State Drive ........................................ 33
3-12 Cable Routing ................................................................................................ 34
Chapter 4 Motherboard Components ...........................................................................40
4-1 Motherboard Components ............................................................................. 40
4-2 Jumper Setting .............................................................................................. 42
4-3 Backplane Board Storage Connector ............................................................ 43
4-3-1 System Front HDD Backplane Board (CBPCBP20C5) ..........................................43

- 8 -
Chapter 5 BIOS Setup ..................................................................................................44
5-1 The Main Menu .............................................................................................. 46
5-2 Advanced Menu ............................................................................................. 48
5-2-1 Trusted Computing .................................................................................................49
5-2-2 ACPI Settings .........................................................................................................50
5-2-3 APEI Conguration.................................................................................................51
5-2-4 General Watchdog Timer........................................................................................52
5-2-5 X86 Emulator Conguration ...................................................................................53
5-2-6 PCI Subsystem Settings.........................................................................................54
5-2-7 Info Report Conguration .......................................................................................61
5-2-8 USB Conguration..................................................................................................62
5-2-9 Network Stack Conguration ..................................................................................63
5-2-10 IP Conguration......................................................................................................64
5-2-11 NVMe Conguration ...............................................................................................65
5-2-12 SATA Conguration.................................................................................................66
5-2-13 Graphic Output Conguration.................................................................................67
5-2-14 Power Restore Conguration .................................................................................68
5-2-15 Intel(R) I350 Gigabit Network Connection ..............................................................69
5-2-16 MAC IPv4 Network Conguration...........................................................................71
5-2-17 MAC IPv6 Network Conguration...........................................................................72
5-2-18 Driver Health...........................................................................................................73
5-3 Chipset Setup Menu....................................................................................... 74
5-3-1 CPU Conguration..................................................................................................75
5-3-2 RAS Conguration..................................................................................................77
5-3-3 Memory Slot Information ........................................................................................78
5-3-4 Serialport Console..................................................................................................82
5-3-5 PCIE Root Complex Conguration .........................................................................83
5-4 Server Management Menu............................................................................. 84
5-4-1 System Event Log ..................................................................................................85
5-4-2 BMC self test ..........................................................................................................86
5-4-3 View FRU Information ............................................................................................87
5-4-4 BMC Network Conguration ...................................................................................88
5-5 Security Menu ................................................................................................ 89
5-5-1 Media Sanitization ..................................................................................................90
5-5-2 Secure Boot............................................................................................................91
5-6 Boot Menu...................................................................................................... 93
5-7 Save & Exit Menu........................................................................................... 95
5-8 BIOS POST Beep code (AMI standard)......................................................... 96
5-8-1 PEI Beep Codes.....................................................................................................96
5-8-2 DXE Beep Codes ...................................................................................................96

- 9 -
Hardware Installation
1-1 Installation Precautions
The motherboard/system contain numerous delicate electronic circuits and components which
can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully
read the user manual and follow these procedures:
• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
• When connecting hardware components to the internal connectors on the motherboard,
make sure they are connected tightly and securely.
• When handling the motherboard, avoid touching any metal leads or connectors.
• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist
strap, keep your hands dry and rst touch a metal object to eliminate static electricity.
•
Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
• Before unplugging the power supply cable from the motherboard, make sure the power
supply has been turned off.
• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
• Before using the product, please verify that all cables and power connectors of your
hardware components are connected.
• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
• Do not place the computer system on an uneven surface
.
• Do not place the computer system in a high-temperature environment.
• Turning on the computer power during the installation process can lead to damage to
system components as well as physical harm to the user.
• If you are uncertain about any installation steps or have a problem related to the use of the
product, please consult a certied computer technician.
Chapter 1 Hardware Installation

Hardware Installation
- 10 -
1-2 Product Specications
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
CPU Ampere® Altra® Max Processor
Dual processors, 7nm technology
Up to 128-core per processor, TDP 250W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be
unavailable
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Socket Dual sockets
LGA4926
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Chipset System on Chip
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Memory 32 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 256GB supported
LRDIMM modules up to 256GB supported
Up to 4TB of memory capacity supported per processor
Memory speed: Up to 3200 MHz
NOTE: Only supports congurations with 1, 2, 4, 6, 8, 12, or 16 DIMMs
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
LAN 2 x 1Gb/s LAN ports (1 x Intel® I350-AM2)
NCSI function supported
1 x 10/100/1000 Mbps management LAN
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Video Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Storage Front side:
Total 12 x 3.5"/2.5" hot-swappable HDD/SSD bays
6 x 3.5"/2.5" Gen4 NVMe hot-swappable SSD bays
6 x 3.5"/2.5" SATA hot-swappable HDD/SSD bays
NOTE:
We reserve the right to make any changes to the product specications and product-related
information without prior notice.

- 11 -
Hardware Installation
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Expansion Slot Riser Card CRS101J:
1 x PCIe x16 slot (Gen4 x16), Full height half-length
Riser Card CRS101K:
1 x PCIe x16 slot (Gen4 x16), Full height half-length
Riser Card CRS202G:
1 x PCIe x16 slot (Gen4 x16), Full height full-length
NOTE: 1 PCIe slot is disabled
Riser Card CRS202H:
1 x PCIe x16 slot (Gen4 x16), Full height full-length
NOTE: 1 PCIe slot is disabled
Riser Card CRS202E:
2 x PCIe x16 slot (Gen4 x8), Low prole half-length
2 x OCP 3.0 Gen4 x16 mezzanine slots (Disabled)
1 x M.2 slots:
M-key
PCIe Gen4 x4
Supports 2242/2260/2280/22110 cards
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Internal I/O 1 x M.2 slot
1 x TPM header
1 x Front panel header
1 x HDD/SSD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Front I/O 2 x USB 3.2 Gen1
1 x Power button with LED
1 x ID button with LED
1 x Reset button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Rear I/O 2 x USB 3.2 Gen1
1 x mini-DP
2 x RJ45
1 x MLAN
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Backplane I/O Front side_CBP20C5: 12 x ports
Speed and bandwidth: PCIe Gen4 x4 or SATA

Hardware Installation
- 12 -
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
TPM 1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Power Supply 2 x 2000W redundant PSU
80 PLUS Platinum
AC Input:
100-120V~/ 12A, 50-60Hz
180-240V~/ 10A, 50-60Hz
DC Input:
240Vdc/ 10A
DC Output:
1000W@100-120V, +12.2V/ 81.5A, +12Vsb/ 2.5A
1600W@180-199V, +12.2V/ 131A, +12Vsb/ 2.5A
1800W@200-220V, +12.2V/ 147.5A, +12Vsb/ 2.5A
2000W@221-240V, +12V/ 163.5A, +12Vsb/ 2.5A
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
System
Management
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Prole
System Firewall
Power Consumption
Power Control
LDAP / AD / RADIUS Support
Backup & Restore Conguration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
Operating
Properties
Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Hardware Installation
- 13 -
Socket
Socket
Security
Security Serve rOperating Properties
PowerS upply
System
Dimension
2U
438mm (W) x 87mm (H) x 730mm (D)

- 14 -
Hardware Installation
1-3 System Block Diagram
PCIe4.0 x16 PCIe4.0 x8 PCIe4.0 x4 SPI
SGPIO x1
TPM
8-Channel DDR4, 16 x DIMMs
Speed up to 3200 MHz
BMC
Flash x2
BIOS
Flash x2
ASPEED
AST2600
G-SC Module
mini
DP
USB3.0
x2 GbE LAN x2 MLAN
Rear I/O
M.2
6-bay 3.5" NVMe + 6-bay 3.5" SATA
USB3.0 x2
Front I/O
Front Panel
USB3.0 x1
USB3.0 x1
USB3.0 x2
OCP 3.0 mezzanine (NCSI)
SFF-TA-1002 4C +
(G-SC Module) CPLD
PCIe2.0 x1
PCIe to USB
uPD720201
USB HUB
RTS5411
PCIe 4.0 x16 slot
Riser Card
PCIe 4.0 x16 slot
Riser Card
2 x PCIe 4.0 x8 slots
Riser Card
2 x PCIe 4.0 x8 slots
Riser Card
PCIe4.0
x
16
PCIe4.0
x
16
PCIe4.0
x
16
PCIe4.0
x
16
OCP 3.0 mezzanine (NCSI)
PCIe 4.0 x16 slot
Riser Card
PCIe4.0
x
16
PCIe4.0 x 16
PCIe 4.0 x16 slot
Riser Card
PCIe4.0
x
16
PCIe4.0
x
16
PCIe4.0
x
16
PCIe3.0
x
2
CCIX x16
CCIX x16
CPU_0
Altra®Max
8-Channel DDR4, 16 x DIMMs
Speed up to 3200 MHz
SATA3.0 x6
PCIe to SATA
ASM1166
CPU_1
Altra®Max

- 15 -
System Appearance
Chapter 2 System Appearance
2-1 Front View
No. Description
1. Front Panel LEDs and Buttons
2. 3.5" HDD Bays
3. Front USB 3.0 Ports
NOTE! The Green Latch Supports NVMe
• Refer to section 2-3 Front Panel LEDs and Buttons for a detailed description of the
function of the LEDs.
2-2 Rear View
No. Description No. Description
1. Mini DP Port 4. Server Management LAN Port
2. USB 3.0 Port x 2 5. OCP 3.0 Slots (Option/SFF)
3. 1GbE LAN Port x 2 6. PCIe Slots
2 3 4 55 1
6
6
6
PSU1
PSU2
SLOT10
SLOT6
SLOT3
SLOT11
SLOT7
SLOT4
SLOT5
SLOT9
SLOT8
SLOT1SLOT2
SLOT12
1 2 3
HDD0
HDD1
HDD2
HDD3
HDD4
HDD5
HDD6
HDD7
HDD8
HDD9
HDD10
HDD11

- 16 -
System Appearance
2-3 Front Panel LEDs and Buttons
L1 L2
1
3
5
7
2
4
6
No. Name Color Status Description
1. Reset Button -- -- Press this button to reset the system.
2. ID Button
with LED
Blue On Indicates the system identication is active.
N/A Off Indicates the system identication is disabled.
3. Power button
with LED
Green On Indicates the system is powered on.
Green Blink System is in ACPI S1 state (sleep mode).
N/A Off - System is not powered on or in ACPI S5 state (power off)
- System is in ACPI S4 state (hibernate mode)
4. System
Status LED
Green On Indicates system is operating normally.
Amber
On
Indicates a critical condition, may include:
- System fan failure
- System temperature
Blink
Indicates non-critical condition, may include:
- Redundant power module failure
- Temperature and voltage issue
- Chassis intrusion
N/A Off
Indicates system is not ready, may include:
- POST error
- NMI error
- Processor or terminator is missing
5. HDD Status
LED
Green On Indicates locating the HDD.
Blink Indicates accessing the HDD.
Amber On Indicates HDD error.
Green/
Amber Blink Indicates HDD rebuilding.
N/A Off Indicates no HDD access or no HDD error.
6/7. LAN1/2 Active/
Link LED
Green On Indicates a link between the system and the network or no
access.
Green Blink Indicates data trasmission or receiving is occuring.
N/A Off Indicates no data transmission or receiving is occuring.

- 17 -
System Appearance
2-4 Power Supply Unit LED
PSU LED
State Description
OFF No AC power to all power supplies
0.5Hz Green Blinking AC present / only standby on / Cold redundant mode
2Hz Green Blinking Power supply rmware updateing mode
Amber
AC cord unplugged or AC power lost; with a second
power supply in parallel still with AC input power
Power supply critical event causing shut down:
failure, OCP, OVP, fan failure and UVP
0.5Hz Amber Blinking
Power supply warning events where the
power supply continues to operate:
high temp, high power, high current and slow fan

System Appearance
- 18 -
2-5 Hard Disk Drive LEDs
/('
/('
RAID SKU LED #1 Locate HDD
Fault Rebuilding HDD Access HDD Present (No Access)
No RAID
conguration
(via HBA)
Disk LED (LED
on Back Panel)
Green ON(*1) OFF BLINK (*2) OFF
Amber OFF OFF OFF OFF
Removed HDD
Slot (LED on
Back Panel)
Green ON(*1) OFF -- --
Amber OFF OFF -- --
RAID
conguration
(via HW RAID
Card or SW
RAID Card)
Disk LED
Green ON OFF BLINK (*2) OFF
Amber OFF ON (Low Speed:
2 Hz) OFF OFF
Removed
HDD Slot
Green ON(*1) OFF (*3) -- --
Amber OFF ON (*3) -- --
LED #2 HDD Present No HDD
Green ON OFF
NOTE:
*1: Depends on HBA/Utility Spec.
*2: Blink cycle depends on HDD's activity signal.
*3: If HDD is pulled out during rebuilding, the disk status of this HDD is regarded as faulty.

- 19 -
System Hardware Installation
Pre-installation Instructions
Computer components and electronic circuit boards can be damaged by discharges of static
electricity. Working on computers that are still connected to a power supply can be extremely
dangerous. Follow the simple guidelines below to avoid damage to your computer or injury to
yourself.
• Always disconnect the computer from the power outlet whenever you are working inside the
computer case.
• If possible, wear a grounded wrist strap when you are working inside the computer case.
Alternatively, discharge any static electricity by touching the bare metal system of the computer
case, or the bare metal body of any other grounded appliance.
• Hold electronic circuit boards by the edges only. Do not touch the components on the board
unless it is necessary to do so. Do not ex or stress the circuit board.
• Leave all components inside the static-proof packaging until you are ready to use the component
for the installation.
Chapter 3 System Hardware Installation

System Hardware Installation
- 20 -
3-1 System Componenmts
CPU1CPU0
PCIe Slots (Top) Power Supply Units (Boom)
Memory Slot Memory Slot Memory Slot
PCIe Slots (Top) Power Supply Units (Boom)
Riser Slot Riser Slot
FAN1 FAN2 FAN3
Hard Disk Drives
FAN4