GIGAIPC QBiX-Pro-BYTA1900HD-A1 User manual

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
1www.gigaipc.com
QBiX-Pro-BYTA1900HD-A1
(QP-1900B-SI)
QBiX-Pro Industrial Embedded System
Quick Start Guide

2
www.gigaipc.com
Copyright Notice
This document is copyrighted, 2022. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, or for any
infringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and
is subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its accuracy,
GIGAIPC assumes no liabilities resulting from errors or omissions in this
document, or from the use of the information contained herein.
GIGAIPC reserves the right to make changes in the product design
without notice to its users.

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
3www.gigaipc.com
Acknowledgement
All other products’ name or trademarks are properties of their
respective owners.
• AMD is trademark of Advanced Micro Devices.
• Microsoft Windows is a registered trademark of Microsoft Corp.
• Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel
Corporation
• Core, Atom are trademarks of Intel Corporation
• ITE is a trademark of Integrated Technology Express, Inc.
• IBM, PC/AT, PS/2, and VGA are trademarks of International Business
Machines Corporation.
All other product names or trademarks are properties of their
respective owners.

4
www.gigaipc.com
Packing List
Before setting up your product, please make sure the following items
have been shipped:
Item Quantity
System kit 1
HDD screw, M3x4L 4
Dehydrate (10G) 1
Terminal Blocks Male plug 1
Terminal Blocks 1*10P 1
If any of these items are missing or damaged, please contact your
distributor or sales representative immediately.

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
5www.gigaipc.com
About this Document
This User’s Manual contains all the essential information, such as
detailed descriptions and explanations on the product’s hardware
and software features (if any), its specifications, dimensions, jumper/
connector settings/definitions, and driver installation instructions (if
any), to facilitate users in setting up their product.
Users may refer to the GIGAIPC.com for the latest version of this
document.

6
www.gigaipc.com
Safety Precautions
Please read the following safety instructions carefully. It is advised that
you keep this manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the
device.
3. Position the power cord so that people cannot step on it. Do
not place anything over the power cord.
4. Always completely disconnect the power before working on the
system’s hardware.
5. No connections should be made when the system is powered
as a sudden rush of power may damage sensitive electronic
components.
6. If the device is not to be used for a long time, disconnect it from
the power supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before
cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray
detergents.
9. Make sure the device is installed near a power outlet and is
easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent
falls
12. Do not cover the openings on the device to ensure optimal heat
dissipation.

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
7www.gigaipc.com
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is
running
15. Never pour any liquid into the openings. This could cause fire or
electric shock.
16. As most electronic components are sensitive to static electrical
charge, be sure to ground yourself to prevent static charge
when installing the internal components. Use a grounding
wrist strap and contain all electronic components in any static-
shielded containers.
17. If any of the following situations arises, please the contact our
service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described
in this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED
ENVIRONMENT WITH TEMPERATURES BEYOND THE DEVICE’S
PERMITTED STORAGE TEMPERATURES (SEE CHAPTER 1) TO
PREVENT DAMAGE.

8
www.gigaipc.com
FCC Statement
This device complies with Part 15 FCC Rules. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device
must accept any interference received including
interference that may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions and your local government’s
recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le
constructeur. Recycler les batteries usées en accord avec les instructions du fabricant
et les directives gouvernementales de recyclage.

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
9www.gigaipc.com
Table Contents
QBiX-Pro Industrial Embedded System 1
Quick Start Guide
Copyright Notice .......................................................................... 2
Acknowledgement ....................................................................... 3
Packing List................................................................................... 4
About this Document ................................................................... 5
Safety Precautions ....................................................................... 6
FCC Statement.............................................................................. 8
Chapter 1 - Product Specifications 12
1.1 Specifications ............................................................... 14
Chapter 2 – QBiX-Pro-BYTA1900HD-A1 16
(QP-1900B-SI) Industrial Embedded System Kit
2.1 Dimension .................................................................... 17
2.2 Getting Familiar with Your Unit..................................... 18
2.3 Memory Installation: DDR3L SO-DIMM ....................... 20
2.4 Antenna Installation (Antenna inclusion may vary based
on local distribution) .................................................... 21
2.5 Din Rail Bracket Installation ......................................... 22
2.6 HDD Installation .......................................................... 23
2.7 Cable Pin-define ........................................................... 24
2.8 Support ........................................................................ 25
2.9 Safety and Regulatory Information............................... 26

10
www.gigaipc.com
Chapter 3 – Hardware Information 27
3.1 Jumpers and Connectors ............................................. 28
3.2.1 BATTERY ....................................................................... 31
3.2.2 LVDS (LVDS connector).................................................. 32
3.2.3 LSW (LVDS resolution jumper) ...................................... 33
3.2.4 BKL_CN (Backlight brightness control connector)........ 34
3.2.5 SODIMM (DDR3L SO-DIMM)......................................... 35
3.2.6 BUZZER.......................................................................... 36
3.2.7 FUSB20_1, FUSB2_2 (USB 2.0 header).......................... 37
3.2.8 SATA (SATA 3 Gb/s Connector).................................... 38
3.2.9 SATAPW (SATA power connector) ............................... 39
3.2.10 GPIO_CNT (General Purpose input/output header) ... 40
3.2.11 JCOM11 (RI# pin RI#/5V/12V Select jumper for
COM1 port) .................................................................................41
3.2.12 DC IN (DC IN 1x4pin power connector) ....................... 42
3.2.13 SYS_PANEL (Front panel header) .................................. 43
3.2.14 COM1, COM2, COM3, COM4 (Serial port header) ....... 44
3.2.15 AT_CN (AT/ATX power mode select jumper) ................ 45
3.2.16 SPK_OUT (Speaker out connector) ............................... 46
3.2.17 M2M (M.2 Slot, SATA, NGFF2280) ................................ 47
3.2.18 MPCIE (Mini PCIe slot)................................................... 48
3.2.19 LPC_CN (LPC Connector) .............................................. 49
3.2.20 FAN (FAN Connector) ................................................... 50
3.2.21 LAN1, LAN2 (LAN Connector) ....................................... 51
3.2.22 RUSB1, RUSB2 (USB 3.2 Gen 1 + USB 2.0 connector) .. 52

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
11 www.gigaipc.com
3.2.23 HDMI (HDMI Connector)............................................... 53
3.2.24 VGA (D-sub port) .......................................................... 54
Chapter 4 – BIOS 55
4.1 Introduction .................................................................. 56
4.2 The Main Menu............................................................. 57
4.3 Advanced ...................................................................... 58
4.3.1 TPM Configuration........................................................ 59
4.3.2 IT8786 Super I/O Configuration.................................... 61
4.3.3 Hardware Monitor ........................................................ 62
4.3.4 S5 RTC Wake Settings ................................................... 63
4.3.5 CPU Configuration ........................................................ 64
4.3.6 SATA Configuration ....................................................... 66
4.3.7 CSM Configuration........................................................ 67
4.3.8 Digital IO Port Configuration ........................................ 68
4.4 Chipset .......................................................................... 69
4.5 Security ......................................................................... 70
4.6 Boot............................................................................... 73
4.7 Save & Exit .....................................................................74

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
12 www.gigaipc.com
Chapter 1
Chapter 1 - Product Specifications

13
www.gigaipc.com
160
117.85
57.2
3.5 8.17
9.15

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
14 www.gigaipc.com
1.1 Specifications
System QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
Dimension System Size : 160W x 118D x 62.6H (mm)
CPU
Intel® Celeron® J1900 Processor
22nm, 4 cores, 4 threads, up to 2.42 GHz
TDP 10W
2MB L2 cache
Chipset SoC
Memory 1 x DDR3L SO-DIMM socket, Max. Capacity 8 GB
Support Single Channel DDR3L 1333 MHz memory modules
Ethernet 2 x GbE LAN Ports (Intel® I211AT)
Graphic support
Integrated Graphics Processor -Intel® HD Graphics:
1 x HDMI 1.4 port, supporting a maximum resolution of
1920x1200 @60Hz
1 x D-sub port, supporting a maximum resolution of
2560x1600 @60Hz (with compatible displays)
(2 independent display outputs)
Audio Realtek® Audio Codec
Storage 1 x 2.5” HDD/SSD (SATA 3Gb/s)
Expansion Slots
1 x 2280 M.2 M-Key (SATA 3Gb/s)
1 x Full-size Mini PCIe with SIM slot (PCIe x1 + USB2.0) –
support 3G/4G module
Front I/O
2 x RJ45 LAN Ports
1 x USB 3.2 Gen 1
3 x USB 2.0
1 x HDMI
1 x D-sub
1 x COM Port (RS-232/422/485 & RI/5V/12V)
1 x COM Port (RS-232/422/485)
1 x Power button with LED
1 x HDD LED
1 x Headphone Jack
Rear I/O 1 x Din Rail Mounting Support
Side I/O
1 x GPIO (8 bits)
1 x 3-pin Terminal Block
3 x External Antenna Holes (Optional)

15
www.gigaipc.com
System QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
TPM 1 x TPM header
Power +9V~36VDC (Full Range)
Operation
temperature
Operating temperature: 0°C to 50°C
Operating humidity: 0-90% (non-condensing)
Non-operating temperature: -40°C to 85°C
Non-operating humidity: 0%-95% (non-condensing)
Use wide temperature range memory and storage
Vibration During
Operation
Operation: IEC 60068-2-64, 5 Grms, random, 5 ~ 500 Hz, 1 hr
/ Per Axis, With SSD/M.2 2242
Non-operation: IEC 60068-2-6, 2 G, Sine, 10 ~ 500 Hz, 1 Oct/
min, 1 hr / Per Axis
Shock During
Operation
Operation: IEC 60068-2-27, 50 G, half sine, 11 ms duration,
with SSD

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
16 www.gigaipc.com
Chapter 2
Chapter 2 – QBiX-Pro-BYTA1900HD-A1
(QP-1900B-SI) Industrial Embedded System Kit

17
www.gigaipc.com
2.1 Dimension
160
117.85
57.2
3.5 8.17
9.15

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
18 www.gigaipc.com
2.2 Getting Familiar with Your Unit
[Front Side]
[Rear Side]
[Left Side]
[Right Side]
1 x COM (RS-232/422/485)
1 x COM (RS-232/422/485 & RI/5V/12V)
D-sub
HDMI
USB 3.2 Gen 1
RJ45 LAN Ports
USB 2.0
Power button
with LED
HDD LED
Headphone Jack
DIO DC IN
WiFi Antenna x 2 (Optional)
3G/4G Antenna (Optional)

19
www.gigaipc.com
[Install]
[Bottom PCB Side]
* Before opening the case, make
sure to unplug the power cord.
* 打 開 機 殼 前，請 確 實 移 除 電 源。
* Before Connecting the power,
make sure to fasten the case
securely.
* 接上電源前，請確實將機殼完整鎖附。
Information
A 1 x NGFF 2280 M.2 slot (SATA 3Gb/s)
B1 x Mini-PCIe slot (PCIe x1+USB2.0)
with SIM Slot
Information
C1 x DDR3L SO-DIMM 1333 MHz
sockets, Max. Capacity 8 GB
D 2.5’’ Hard drive/SSD
A
BCD

System - QBiX-Pro Series QBiX-Pro-BYTA1900HD-A1 (QP-1900B-SI)
20 www.gigaipc.com
2.3 Memory Installation: DDR3L SO-DIMM
SO-DIMM
1
2