GIGAMEDIA GGM IPAA16I User manual

Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
IP NETWORK PA SYSTEM
■ GGM IPAA16I
OWNER'S MANUAL
■ NETWORK FIRE ALARM COLLECTOR
ON
OFF
POWER
ALARM ZONES
11 12 13 14 15 16 1 2 3 45678910
NETWORK FIRE ALARM COLLECTOR
GGM IPAA16I
ALARM RESET
WWW.GIGAMEDIA.NET

TABLE OF CONTENTS
2
1. ........................................................................................ 3
2. ......................................................................................5
3. ............................................................................................................5
4. ................................................................... 6
.........................................................................................................7
................................................................................................8
7. ..................................................................................................9
...................................................................... ......................... 10
SAFETY PRECAUTIONS
PRODUCT DESCRIPTION
FEATURES
5. OPERATION
6. WIRING DIAGRAM
BLOCK DIAGRAM
8. SPECIFICATIONS
NAME AND FUNCTION OF EACH PART
WWW.GIGAMEDIA.NET

1. SAFETY PRECAUTIONS
3
Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
If you detect smoke or a strange smell coming
from the unit.
If water or any metallic object gets into the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest dealer.
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
WWW.GIGAMEDIA.NET

SAFETY PRECAUTIONS
4
An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.
When Installing the Unit
Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
Make sure that the volume control is set to
minimum position before power is switched on.
Loud noise produced at high volume when power is
switched on can impair hearing.
Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
Contact your dealer as to the cleaning. If dust
is allowed to accumulate in the unit over a long
period of time, a fire or damage to the unit may
result.
If dust accumulates on the power supply plug or in
the wall AC outlet, a fire may result. Clean it
periodically. In addition, insert the plug in the wall
outlet securely.
Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.
WWW.GIGAMEDIA.NET

Link with the fire center, used to accept the fire alarm short circuit signal.
2. PRODUCT DESCRIPTION
3. FEATURES
1. Standard cabinet design,1U height, high-grade brushed aluminum alloy panel, sophisticated
technology, high-end appearance.
2. Adopt embedded industrial dual-core processing chip (ARM + DSP), start time is less than 1s.
3.16 channels fire short circuit signal input, unlimited expansion of the input interface to facilitate
bigger system.
4. Support one key to restore the factory function, ease of system maintenance and management.
5. The panel supports one key to cancel the task.
6. Standard network interface, full rate connection up to 100M.
5
WWW.GIGAMEDIA.NET

~190-240V 50-60Hz
25W
T1AL 250V
LAN IN
INPUTS
1 5 9 132 6 10 14
3 7 11 15
4 8 12 16
4. NAME AND FUNCTION OF EACH PART
6
● Fr on t pa ne l
1. All zone alarm reset button. When under all zone alarm trigger status, user can press the
reset button to cancel the alarm trigger status.
2. 16 channels alarm status indicator.
3. Power switch---mainly used to turn on/off machine.
4. Power indicator light---mainly used to indicate the power on/off, LED ligh on when machine
turned on, LED ligh off when machine turned off.
1 2 34
● Re al p an el
567
5. AC power input.
6.16 channels alarm signal input port.
7. Network cable to connect the Ethernet port / switch.
WWW.GIGAMEDIA.NET

5. OPERATION
7
IP network broadcasting system software
1) Use network cable connect the terminal LAN IN with computer internet access or interchanger
connection. Open the computer “ " folder, select run "to
run the server" program.Then choose run "configuration IP address" program, IN the pop-up dialog
window, click the "query"button (figure 1), can query the terminal current IP address (figure 2), as
shown in the figure below:
When the system configuration requirement, it needs to modify current terminal IP address, can be
manually directly change the dialogue window "IP address" item or directly press "next" button (on the
basis of the current existing IP address + ascending order) as shown in figure 3. After set up the relevant
parameters, click on "write" button, then press the "PING" button, check the IP address of the new
modified with terminal server if it is connected, the pop-up window (figure 4), it proves the new modified
IP address terminal is connected with server, close configuration "IP address" program window, complete
the terminal IP address modification operations.
Figure 1
Figure 2
Figure 3
Figure 4
WWW.GIGAMEDIA.NET

6. WIRING DIAGRAM
8
LAN IN
1 5 9 132 6 10 14
3 7 11 15
4 8 12 16
INPUTS
Connect the Ethernet port / switch
Alarm signal input
AC power input
WWW.GIGAMEDIA.NET

7. BLOCK DIAGRAM
9
Inserts
Inserts
TO:Switching power supply
POWER
Power switch circuit
Panel control circuit
Network board
WWW.GIGAMEDIA.NET

8. SPECIFICATIONS
10
Network Interface
Supportive protocol
Transmission rate
Short circuit interface
Power consumption
Power supply
Standard RJ45 input
100Mbps
Industry standard terminals
≤25W
~220V 50Hz
TCP/IP, UDP, IGMP (Multicast)
484x209x44mm
Net weight
3Kg
Model GGM IPAA16I
Dimensions
WWW.GIGAMEDIA.NET

VersionV0.1
IP NETWORK PA SYSTEM