Gigaset Gigaset 3015 Classic User manual

Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 UMSCHL_V.FM 20.12.99
U1
Gigaset
3015
Classic

Operating Instructions
and Safety Precautions !

General
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 UMSCHL_V.FM 20.12.99
General
Safety precautions
●Only use the plug-type AC adapter supplied as indicated on the underside of the unit.
●Never use ordinary (non-rechargeable) batteries. Only use approved batteries (rechargeable);
otherwise the battery casing could be destroyed (dangerous), see the table on page 7.
●The mobile unit can affect medical equipment.
●The mobile unit can cause unpleasant humming in hearing aids.
●never set up the base station in bathrooms or showers.
●Never use the telephone in environments where there is a risk of explosion (e.g. paint shops).
●Batteries and telephones should always be disposed of in an environmentally responsible way.
●Always include the operating instructions when passing on your Gigaset unit to someone else.
●The battery compartments of the mobile unit contain the following information labels:
Observe correct polarity when inserting rechargeable batteries.
Use the battery type indicated in these operating instructions.
Displays

_
+
Base station icon
Charging status icon
Mailbox function:
New number in the caller list
Off hook
 External connection
 Internal connection
Mobile unit locked
New message on telephone ans-
wering machine
Pause
Blank
Star key 
Hash key 
Recall key 
 Telephone PIN input
 Keypad protection
U2

General
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 UMSCHL_V.FM 20.12.99
Gigaset 3000 Classic mobile unit: brief overview
Display keys
When icons are displayed above the 3 keys in the display, the meaning of these icons is as fol-
lows:
Keys on the base station
Charging status
full
empty
Redial a number
Make internal call
Ta l k k e y
–Acceptcall
– Dial call
number
Keypad protection
on/off,
hold key down
Delete characters
Base station icon
–Constant: ready
to receive
–Flashing: no base
station contact
Speed dialling
Activate
Set key
– To save
– For settings
End call key
– End call
–Handset on/off:
hold key down
– Cancel
function
Recall key
– For systems and
selected services
–Pause:
hold key down!


Confirm
Scroll back
Scroll forwards
Loudspeaker loud
Previous message
Greeting key
Erase greeting/messages/
information Record greeting/information
Pause/STOP
Paging key
Loudspeaker quiet
Play back messages
Answering machine key
Next message
U4

General
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 UMSCHL_V.FM 20.12.99
Quick reference guide
For information on mobile unit settings, see overview on the back of the operating instructions.
Function Key combination
Activate/deactivate
the mobile unit Hold down for 1 second
Activate/deactivate
keypad protection Hold down for 1 second
Make an external call 
Redial a number or. 
Save a speed dial number e.g.. 
Dial a speed dial number  or e.g. 
Dial a number from call list 
Set handset volume  z. B. 
Mute microphone Microphone muted; Microphone on
Make an internal call e.g . 
Call all mobile units 
Transfer call (connect) e.g. 
Internal enquiry call e.g. ; terminate enquiry call: 
Set date set the dat e
Set time set the tim e
Play back messages or key (base station)
Erase individual old messages On base station: during playback
Erase all old messages On base station: .

Contents
1
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 3015sIVZ.fm 20.12.99
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Gigaset 3000 Classic mobile unit: brief overview. . . . . . . . . . . . . 3
Keys on the base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Quick reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparing the telephone . . . . . . . . . . . . . . . . . . . . . . 4
Checking the contents of the package . . . . . . . . . . . . . . . . . . . . . 4
Installing/connecting the base station . . . . . . . . . . . . . . . . . . . . . 4
Inserting/charging the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Attaching the belt clip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Activating/deactivating the mobile unit. . . . . . . . . . . . . . . . . . . . . 8
Activating/deactivating keypad protection . . . . . . . . . . . . . . . . . . 8
Setting the date/time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Activating/deactivating the answering machine . . . . . . . . . . . . . 10
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Making an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Making an internal call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Displaying the incoming call number (CLIP) . . . . . . . . . . . . . . . . 12
Muting the microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Picking up a call to the answering machine . . . . . . . . . . . . . . . . 13
Calling the mobile unit direct (DID). . . . . . . . . . . . . . . . . . . . . . . 13
Call pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Making a broadcast intercom call . . . . . . . . . . . . . . . . . . . . . . . . 14
Fax calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Paging a mobile unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Enhanced telephone features . . . . . . . . . . . . . . . . 15
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Speed dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Caller list/mailbox function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Open listening on the base unit . . . . . . . . . . . . . . . . . . . . . . . . . 18
Recording an external call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Contents
Index..................................................................................62

Contents
2
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 3015sIVZ.fm 20.12.99
Cost-effective telephoning . . . . . . . . . . . . . . . . . . . 19
Call-by-call support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Displaying the call duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Displaying call charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Call allowance account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Answering machine. . . . . . . . . . . . . . . . . . . . . . . . . 23
Operation using the base station . . . . . . . . . . . . . . . . . . . . . . . . 23
Operating the answering machine with the mobile unit . . . . . . 28
Operating the answering machine when out of the office (remote
operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Individual answering machine settings . . . . . . . . 34
Number of rings (charge save function) . . . . . . . . . . . . . . . . . . . 34
Message length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Pause after message playback. . . . . . . . . . . . . . . . . . . . . . . . . . 35
Time stamp for each message. . . . . . . . . . . . . . . . . . . . . . . . . . 35
Monitoring on the base station. . . . . . . . . . . . . . . . . . . . . . . . . . 35
Broadcast intercom call (speaker call) . . . . . . . . . . . . . . . . . . . . 35
Recording quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Individual mobile unit settings . . . . . . . . . . . . . . . . 37
Setting the ringer volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Setting the ring tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Setting the handset volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Activating/deactivating beeps. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Activating/deactivating base station display . . . . . . . . . . . . . . . . 38
Automatic talk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Resetting the handset to factory default . . . . . . . . . . . . . . . . . . 39
Registering at more than one base station. . . . . . . . . . . . . . . . . 39
Changing the base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Base station settings . . . . . . . . . . . . . . . . . . . . . . . . 40
Setting the ringer volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Setting the ring tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Setting the key beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Activating/ deactivating music on hold . . . . . . . . . . . . . . . . . . . . 41
Setting pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Resetting the factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Mobile unit security . . . . . . . . . . . . . . . . . . . . . . . . . 43

Contents
3
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 3015sIVZ.fm 20.12.99
Changing the telephone PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Activating hot key (direct station selection) . . . . . . . . . . . . . . . . 43
Activating the telephone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Dialling an emergency number. . . . . . . . . . . . . . . . . . . . . . . . . . 45
Deactivating the telephone lock . . . . . . . . . . . . . . . . . . . . . . . . . 45
Base station security. . . . . . . . . . . . . . . . . . . . . . . . 46
Changing the base station‘s system PIN . . . . . . . . . . . . . . . . . . 46
Activating/deactivating the base station lock . . . . . . . . . . . . . . . 46
Barring/enabling call numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Saving emergency numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Operating more than one mobile unit . . . . . . . . . . 49
Registering additional mobile units. . . . . . . . . . . . . . . . . . . . . . . 49
Making an internal call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Forwarding a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Internal enquiry call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Accepting call waiting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Collective call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Displaying the mobile unit number. . . . . . . . . . . . . . . . . . . . . . . 52
Monitor function on the mobile unit . . . . . . . . . . . . . . . . . . . . . . 53
De-registering mobile units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Disabling external dialling at individual mobile units. . . . . . . . . . 54
Connecting a fax/modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Activating/deactivating the ringer . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting the ring delay/collective call/ direct inward dialling. . . . . 55
Connecting to a PABX system . . . . . . . . . . . . . . . . 57
Setting the dialling mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Switching to tone dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Saving an external code (dial-out number) . . . . . . . . . . . . . . . . . 58
Pause after external code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Guarantee/service/approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Answering machine remote control
Settings – Overview . . . . . . . . . . . back cover sheet

4
Preparing the telephone
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 VORBEREI.FM 20.12.99
Preparing the telephone
Checking the contents of the package
The package contains the following:
●one Gigaset 3015 base station
●one Gigaset 3000 Classic mobile unit
●one plug-type AC adapter
●one telephone cord
●one belt clip for the mobile unit
●two batteries
●one set of Gigaset 3015 Classic operating instructions
Installing/connecting the base station
Notes on installation
Range
The base station range is approx. 300 m outdoors and up to 50 m indoors. The
base station icon indicates whether radio contact exists between the base sta-
tion and mobile unit:
– The base station is designed for operation in protected rooms with
a temperature range from +5°C to +45°C.
– Install the base station in a central location in the apartment/
house, e.g. in the hall.
–Donot operate the base station in the bathroom.
– Do not operate the mobile unit is environments where there is risk
of explosion, such as a paint shop.
Base station icon is constant:
The mobile unit is ready for dialling and receiving calls.
Base station icon flashes:
No radio contact between the mobile unit and the base station – dial-
ling or calling not possible!


5
Preparing the telephone
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 VORBEREI.FM 20.12.99
Connecting the base station
Use only the plug-type AC adapter supplied as indicated on the
underside of the base station.
AC adapter and
plug on mains cable
Underside of
base station
●Insert small jack on telephone cable
into slot (clicks into place)
●Place cable in cables duct
●Insert telephone jack into telephone
socket
●Insert small jack on mains cable into
slot (clicks into place)
●Place cable in cables duct
●Insert AC adapter into mains socket
2.
Cable duct
Telephone jack on
telephone cable
1.

6
Preparing the telephone
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 VORBEREI.FM 20.12.99
Inserting/charging the batteries
Inserting the batteries
●Insert the batteries, ensuring correct polarity – see figure on left.
●Insert the cover approx. 3 mm into the battery compartment and push
gently forwards until it clicks into place.
●To o p e n the cover, press the grooved area on the cover and slide back.
●The mobile unit is already registered at the base station when
shipped.
●For information on registering additional mobile units or replace-
ment mobile units (after repair), see page 49.
●Never use ordinary (non-rechargeable) batteries.
Only use batteries that have been approved (rechargeable),
see table on page 7.
●Only use approved batteries of the same type.
●Never use non-Siemens charging units as these can damage the
batteries.

7
Preparing the telephone
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 VORBEREI.FM 20.12.99
Charging the batteries
The batteries supplied are not charged.
To charge the batteries, insert the mobile unit in the base station or Gigaset
3000L charging unit (accessory) – you will hear the confirmation beep. The
charging status icon flashes on the mobile unit display to indicate that a charg-
ing operation is in progress:
Approved batteries:
Mobile unit operating times/charging times:
Power consumption:
– In standby mode (without charging) approx. 2W.
– In standby mode while charging approx. 5W.
Batteries empty Batteries 2/3charged
Batteries 1/3charged Batteries full
– We recommend initially charging the batteries for at least 16 hours
without interruption – irrespective of the charging status icon.
– Once the first charging operation is complete, you can replace the
mobile unit in the base station after every call. Charging is controlled
electronically. This ensures optimum charging and prolongs battery
life.
– The batteries heat up during charging; this is normal and entails no
risk.
– The battery charging status is only correctly displayed after uninter-
rupted charging/discharging. You should therefore avoid opening the
battery compartment unnecessarily.
Nickel-cadmium (NiCd) Nickel-metal-hydride (NiMH)
Sanyo N-3U (700 mAh) Sanyo H-3 U (1500 mAh)
GP GP60AAKC (600 mAh) GP GP130 AA HC (1300 mAh)
Varta 751RS (700 mAh) GP GP150 AA HC (1500 mAh)
Mobile Power 700 (700 mAh) Varta VH 1101 or Phone Power(1000 mAh)
Panasonic 60 DT (600 mAh) Panasonic HHR-110 AA (1100 mAh)
Friwo NiMH (1400 mAh)
Toshiba TH-1200 AARE (1200 mAh)
Capacity
(mAh)
Stand-by time
(hours)
Ta l k t i m e
(hours)
Charging time
(hours)
700 up to 100 over 10 approx. 5
110 0 up to 160 over 15 approx. 9
1500 up to 220 over 20 approx. 12

8
Preparing the telephone
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 VORBEREI.FM 20.12.99
Attaching the belt clip
Press the belt clip onto the back of the mobile unit until the side protrusions
click into place in the holes provided.
Activating/deactivating the mobile unit
Press the end call key for 1 second – you will hear the confirmation beep*!
Activating/deactivating keypad protection
You can deactivate the mobile unit keys, e.g. when carrying the unit in your
pocket or bag. This protects the keypad against inadvertent activation. Calls
can be accepted with the talk key .
To activate/deactivate keypad protection, hold the key shown for 1 second –
you will hear the confirmation beep*!
* 1 long tone = confirmation, 4 brief tones = error
The mobile unit activates automatically as soon as you insert the batte-
ries and place it in the base station/charging unit.
 Display when keypad protection is
activated.

9
Press keys:
Preparing the telephone
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 VORBEREI.FM 20.12.99
Setting the date/time
Setting the date
The date setting is required so that the entry date can be displayed
in the caller list and output along with the answering machine
messages.
Start the setting – the current setting is displayed; the current input
point flashes:
e. g.Enter Day.
If necessary press to skip backwards and re-enter.
e. g. Enter Month.
e. g. Enter Ye a r.
 Save the setting and quit the function.
Setting the time
The time setting is required so that the entry time can be displayed
in the caller list and output along with the answering machine
messages.
Start the setting – the current setting is displayed; the current input
point flashes:
e. g. Enter Hours.
If necessary press to skip backwards and re-enter.
e. g. Enter Minutes.
 Save the setting and quit the function.
e.g.    
Ye a r
Month
Day
e.g.  
Minutes
Hours
The date and time must be reset after a power failure or after
the base station AC adapter has been unplugged.

10
Press keys:
Preparing the telephone
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 VORBEREI.FM 20.12.99
Activating/deactivating the answering
machine
The telephone answering machine can be used as soon as the base
station has been connected.
Activation:
Press the answering machine key on the base station.
The key lights up.
Deactivation:
Press the answering machine key on the base station.
The key lamp goes out.

11
Press keys:
Making calls
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 Te l e f. f m 20.12.99
Making calls
Making an external call
External calls are calls using an external line.
Enter the call number.
If necessary, correct it with the delete key .
Press the talk key to start the dial operation.
Ending a call:
Press the end call key.
Making an internal call
You can conduct internal calls with up to 6 mobile units.
Press the INT key – the mobile unit’s internal call number is displayed.
e.g. Enter the internal call number of the mobile unit you want to call.
Press: to call all mobile units
Ending a call:
Press the end call key.
●You can also press the talk key first and then enter
the call number – each digit is dialled immediately.
●Yo u c a n cancel the dial operation with the end call key
.
●You can insert a pause with the recall key (hold key
down).
●You can opt to not save entries, e.g. when controlling ex-
ternal telephone services: press the keys
, all num-
bers entered afterwards are not saved for number redial.
●Adjust the mobile unit’s handset volume (even during a
call), see page 37.

12
Press keys:
Making calls
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 Te l e f. f m 20.12.99
Answering a call
A call is signalled by the ringer.
Press the talk key.
or
if the auto talk feature is activated, remove the mobile unit from its
base station (see status on delivery on page 39).
Displaying the incoming call number
(CLIP)
If calling line identification presentation (CLIP) is supported by the net-
work carrier, the caller’s number and EXT appear on the handset’s dis-
play:
or
- - - and EXT if the number was not received or
- - - - - - - - and EXT if the number has been suppressed by the caller.
or
the internal call number of another mobile unit and INT.
Muting the microphone
You can deactivate your microphone during external calls in order, for
example, to talk privately to somebody in the room. The calling party
cannot hear your conversation during this time.
Mute the microphone – the calling party on hold will hear music.
Re-activate the microphone.
For information on setting the mobile unit’s handset volume
(even during a call), see page 37.
e.g. 


13
Press keys:
Making calls
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 Te l e f. f m 20.12.99
Picking up a call to the answering
machine
You can pick up a call to the answering machine while a message is
being recorded.
Press the talk key.
Recording is ended and you can talk to the caller.
Calling the mobile unit direct (DID)
If you have set the DID function (see p. 55), then an external caller can
dial the internal call number of a mobile unit after dialling your number.
After dialling your number, the external caller hears an advisory an-
nouncement, irrespective of the telephone answering machine
setting (see p. 24).
If you have not recorded an advisory announcement, the caller will
hear the standard advisory announcement “Please dial the extension
you require, or hold“.
He then has 5 seconds to call the internal call number of a mobile unit.
If the required subscriber does not answer the call,after several rings
the call is signalled on all mobile units as a hunt group call (for call tone
delay settings see page 56).
If the call is not answered by a subscriber at this stage and if the tele-
phone answering machine is switched on, after several rings (for set-
ting see page 34), the call is answered with the set recorded an-
nouncement (announcement 1 or announcement 2). If the advisory
announcement is set, the telephone answering machine will not an-
swer the call.
Here is an example of a typical advisory announcement in
association with direct inward dialling:
“Dial 1 for Mr. Miller, dial 2 for Ms. Mayer, dial 3 for the sec-
retary‘s office. If you do not have a specific contact, please
dial *.”

14
Press keys:
Making calls
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 Te l e f. f m 20.12.99
Call pickup
If a call is not answered at the mobile unit that has been dialled, you
can also pick it up using another mobile unit.
Press the talk key.
 Answer the call.
You are now connected to the external caller.
Making a broadcast intercom call
You can use the mobile unit to make a broadcast intercom call using
the base station loudspeaker.
 Call the telephone answering machine.
Switch on the broadcast intercom call function and speak.
End the broadcast intercom call function.
Press the End Call key.
Fax calls
You can register a Gigaset 1000 TAE cordless connector on the base
station. This can be used to connect a corded telephone, a fax ma-
chine, or a modem (see p. 54). Fax calls are automatically forwarded
to the fax machine by the base station.
Paging a mobile unit
Press the key on the base station – all mobile units ring.
To quit paging:
Press the key on the base station again or
press the talk keyon a mobile unit.

15
Press keys:
Enhanced telephone features
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 KOMFORT.FM 20.12.99
Enhanced telephone features
Redial
Your mobile unit automatically stores the last five call numbers dialled.
You can dial, change, display and delete these numbers.
Redialling a number
Display call numbers – the last number dialled is displayed:
Select a call number.
Press the talk key to start dialing.
Deleting all numbers
All five redial numbers are deleted.
Initiate the function.
Te l e p h o n e P I N Enter the mobile unit’s telephone PIN and confirm
(factory setting 0000).
Delete all numbers.
 Confirm the delete action and terminate the function.
Speed dialling
The speed dialling list simplifies dialling for up to10 call numbers.
e. g.  
Call number
Memory location
●Display keys , (see also p. 2)!
●Modifying the call number displayed:
and supplement or press to correct.
●Numbers can also be saved during a call!
●Display keys , (see also p. 2)!

16
Press keys:
Enhanced telephone features
Gigaset 3015 Classic, ÜBasis, A31008-G3015-B001-1-19 KOMFORT.FM 20.12.99
Saving/changing/deleting call numbers
 Press the set key and then the speed dial key – the entry for speed
dial number 1 is displayed:
e. g. oder Enter the speed dial number (digit 0to 9) or press to scroll to the
speed dial number you want to dial.
Confirm the selection.
Enter a new call number (destination) or change an existing call num-
ber. If necessary, delete the entire call number with .
Save the number – you will hear the confirmation beep.
Terminate the function.
Speed dialling
Press the speed dial key.
e. g. Enter the speed dialing number (digit 0to 9) or scroll with.
Dial the call number.
Saving a call number from the redial list
 Press the set key followed by the speed dial key.
e. g. or Enter the speed dial number (digit 0to 9).
Confirm your selection.
Select a call number in the redial list.
 Save the call number (confirmation beep) and terminate the function.
Deleting the speed dial list
All numbers are deleted!
Initiate the function.
Te l e p h o n e P I N Enter the mobile unit’s telephone PIN and confirm
(factory setting: 0000).
 Confirm the delete action and terminate the function.
e. g. 
Blank or call number
Speed dial no. (memory location)
Changing a speed dial number before dialling:
Confirm the number displayed with , change the number
and dial with .