Owner’s Manual
MODEL # CT086 / My First Bakery
Dimensions: 36” x 36”x 48” (H)
DESCRIPTION QTY.
POP-UP TENT
100% Polyester 1
STAKES
Steel 4
CARRY POUCH
100% Polyester 1
ASSEMBLY INSTRUCTIONS DISASSEMBLY INSTRUCTIONS
Contents and colors may vary. Please retain package
or future reference.
STYLE #:CT086
WASHING & CARE INFORMATION
Hand wash using a mild dishwashing soap and soft
sponge, then allow the fabric to completely air dry. To
prevent mold or mildew do not store wet or damp.
WARNING:
Keep all flame and heat away from tent and tent fabric.
This tent meets flammability requirements of CPIA -84 .
THIS TENT IS NOT FIRE PROOF.
IF LEFT IN OPEN FLAME THE TENT WILL BURN.
CAUTION:
This product was not designed to be left out in the sunlight
for extended periods of time. Prolonged UV exposure will
rapidly break down the fabric of this product. UV damage
is not covered under our warranty
WARNING :
NEVER LEAVE CHILDREN UNATTENDED.
WINDY CONDITIONS MAY UPROOT THE TENT.
ALWAYS STAKE DOWN TENT.
ADULT SUPERVISION REQUIRED.
AGES 3 AND UP RECOMMENDED.
CAUTION:
Never use any fuel-burning or oxygen-consuming
devices, or any devices that produce fumes, including
stoves, lanterns, candles, hibachis or heaters in or
around your tent. This can result in carbon monoxide
poisoning, injury or death
Manufactured in China for
Gigatent
55 Haul Rd
Wayne, New Jersey 07470
www.gigatent.com
1-877-836-8701
TO VIEW FULL SELECTION OF OUR
PLAY TENT PRODUCT LINE,
GO TO WWW. GIGATENT.COM
For questions or concerns call Gigatent at our Toll Free Number: 877-836-8701
Monday-Thursday 9am-5pm EST, Friday 9am-12pm EST or
For replacement parts login to gigatent.com/replacements
STEP 1:
Confirm product contents by emptying contents of bag(s)
and confirming all parts are included and undamaged.
STEP 2:
Select a smooth level site and spread out your tent.
STEP 3:
Pull tent frame apart to pop open tent.
CAUTION: Tent has inner steel wire which may spring open suddenly
while attempting to assemble tent.
TIP: Frame may need minor adjustment when tent is set up. Gently bend
frame into shape if sagging appears.
STEP 4:
Attach roof to main structure with “hook and loop” tabs.
STEP 5:
Stake tent to ground if playing outside to avoid tent toppling over.
STEP 1:
Remove roof from tent.
STEP 2:
Pick up the tent and lay it on its side.
STEP 3:
Grasp the top of frame and push one of the corners INTO the structure
towards the OPPOSITE corner.
STEP 4:
The structure will now fold flat.
STEP 5:
Grasp 2 DIAGONALLY OPPOSITE corners and bring them together in
one hand. (You now have a loop above and below your hande)
STEP 6:
Kneel down and place the bottom loop on the ground.
STEP 7:
Grasp the outer edge of the top loop furthest away from you and fold
inward toward the lower loop and lay flat on the ground. (You now
have 2 loops on top of a larger one)
STEP 8:
Slide one of the smaller loops over the one next to it and grasp the
outside edges of the entire folded playhouse.
STEP 9:
Slowly move your hands around the outside edges to make all of the
loops the same size.
STEP 10:
Place folded structure into carry case.
STEP 11:
Fold roof and reapeat steps 5 through 10 to store roof inside carry case.
