Gill 410-G2 Reference guide

www.gillathletics.com
800-637-3090
410 –G2 STARTING BLOCK
CUSTOMER INSTRUCTIONS
Designed for high level
competition. Constructed of
aircraft quality aluminum.
Pedals feature four angle
adjustments.
Includes ½” pyramid spikes for
synthetic tracks.
Copyright © 2020 by Gill Athletics. All rights reserved.
GILL ATH
07/24/2020
INST410
Pedals adjust easily
along the length of
the rail.
Ruled decal makes
repeatable pedal
set-ups quick and
easy.
Pedals feature
four angle
adjustments.
45°55°65°75°

www.gillathletics.com
800-637-3090
410 –G2 STARTING BLOCK
CUSTOMER INSTRUCTIONS
Copyright © 2020 by Gill Athletics. All rights reserved.
GILL ATH
07/24/2020
INST410
The 410 G2 Starting Block consists of
the following:
1x G2 Rail (41010)
1x Front Stake Plate (P41004)
1x Rear Stake Plate (P41005)
1x Right Pedal (41020)
1x Left Pedal (41020)
4x Stake Plate Screw (P41011)
12x Pyramid Spikes ½” (P41001)
1x Allen Wrench
1x Spike Wrench
Using the four screws and
provided Allen wrench, fasten the
front and rear stake plates to the
rail. The front stake plate should
be at the end of the rail with the
“10” marking. The rear stake plate
should be at the end of the rail
with the “55”
Turn the starting block over and
install the track spikes with the
provided spike wrench. The large
hole between the spike locations
is for an anchor pin for cinder
tracks or tracks with anchor pin
sleeves.
Turn the starting block back over
and place the pedals on the rail so
that they engage the “teeth” of
the rail. The pedals should face
the front of the rail, towards the
“10” marking. Adjust the angle of
the pedals as needed.

www.gillathletics.com
800-637-3090
410 –G2 STARTING BLOCK
CUSTOMER INSTRUCTIONS
Copyright © 2020 by Gill Athletics. All rights reserved.
GILL ATH
07/24/2020
INST410
P41001
Pyramid Spikes (bag of 12)
P41002
Anchor Pin with Cap (bag of 3)
Sold Separate
41020
Left & Right Pedal Block (without pads)
41010
G2 Rail
41040C02
Blue Pad 41040C03
Red Pad
41040C12
Black Pad
P41012
Bracket Bushing (single)
P41011
Stake Plate Screw, ¼”-20 x 3/8”
socket cap (single screw)
P41212
Adjustment Spring and Rod
P41007
Pedal Bracket
P41006
Pedal Hinge Set Screw
M6 X 25 (single screw)
P41005
Rear Stake Plate P41004
Front Stake Plate