Web and Warehouse Rectangle Trampoline Basketball Set User manual

Page 1 (Revision 3.1) Copyright © 2017 Web and Warehouse All Rights Reserved.
Owner’s & User’s Manual
Safety Information & Installation Instructions.
Basketball Set - Rectangle Trampolines
Warning: Read this manual before assembling and using the basketball set.
Warning: Improper installation or swinging on the ring may cause serious
injury or death.

Page 2 (Revision 3.1) Copyright © 2017 Web and Warehouse All Rights Reserved.
Assembly Tip: The basketball ring can be mounted to any net pole. Consider which pole would be most
suitable to use, taking into consideration where the ball will end up if the ball shooter misses the
backboard.
For example, you may want to consider selecting a pole that is not near the neighbour’s fence!
Step 1
Layout box contents.
Step 2
Remove elastic net straps that are adjacent to the net pole which you have chosen to install your
basketball set onto.
Go to the relevant page for your size trampoline.

Page 3 (Revision 3.1) Copyright © 2017 Web and Warehouse All Rights Reserved.
For: 7x10ft & 8x12ft
Step 3
Remove the tee piece from the top of the net pole which you have
chosen to install your basketball set onto.
Step 3.1
Locate the eye bolts ‘A’& ‘B’as shown in the image.
Please note: The ‘A’ eye bolt will be slightly smaller in diameter than
the ‘B’ eye bolt.
Step 3.2
Slide the ‘B’ eye bolt over the tee piece and the ‘A’ eye bolt over the
net pole.
Step 3.3
Re-connect the tee piece to the net pole and fit the black spacers
over both eye bolts.
Go to step 6 to finish assembly.

Page 4 (Revision 3.1) Copyright © 2017 Web and Warehouse All Rights Reserved.
For: 9x14ft
Step 4
Remove the tee piece from the top of the net pole which you
have chosen to install your basketball set onto and slide both ‘C’
eye bolts over the tee piece as shown.
Please note: You will need to depress the spring clip to get the
eye bolts higher than the clip.
Assembly Tip:
If you are finding it difficult to disconnect the tee piece, it
can be helpful to have a second person to remove and
lower the net pole from the bottom net pole socket to give
the net pole more vertical clearance.
Step 4.1
Re-connect the tee piece to the net pole and fit the black
spacers over both eye bolts.
If you removed the bottom of the net pole as per the above
“Assembly Tip” then refit this and the bottom net straps.
Go to step 6 to finish assembly.

Page 5 (Revision 3.1) Copyright © 2017 Web and Warehouse All Rights Reserved.
For: 10x17ft &14x16ft
Step 5
Remove the tee piece from the top of the net pole which you have chosen to install your basketball set
onto and slide the ‘C’ eye bolts over the top of the net pole as shown.
Step 5.1
Re-connect the tee piece to the net pole and fit the black spacers over both eye bolts.
Go to step 6 to finish assembly.

Page 6 (Revision 3.1) Copyright © 2017 Web and Warehouse All Rights Reserved.
For: All sizes
Step 6
Locate the black elbow adapter pole and insert the
eyebolt threads through the holes as shown. Ensure
the eye bolts are as high as they can go on the net
pole. Fasten the included locknuts (do not use
excessive force).
Step 6.1
Screw black protective thread caps over end of
exposed thread and slide net pole sleeve up over the
lower eye bolt cap.
Step 6.2
Slide backboard downwards onto backboard mount
and ensure the spring clip fully engages.
Pump up the ball and enjoy!
Warning: It is important when using the trampoline in general, and when
jumping and shooting the ball at the basketball hoop, to minimise jumping
excessively near the mat edge as this will accelerate wear and tear on the
mat edge, springs and pads.