Gingerway GW-6321 User manual

Gingerway Technologies Co.,Ltd
Enjoy the Life
Smart RF Wall Touch Switch Instruction Manual
GW-6321~6323 (Neutral Optional)
GW-7321~7323 (Neutral Required)
Usage
Smart RF Switches
GW-6321 ~ GW-6323
GW-7321 ~ GW-7323
Short press the on-o key can turn on/o the lamps.
Long press the on-o key to send out binding request.
Cut o the power of switch. After the electric discharge over,
long press any on-off key for 10 seconds within 3 seconds
since power on, the switch will be restored to factory settings.
Gingerway smart RF switches must be used with Gingerway remote control, can
also be used with Gingerway smart gateway. About the related operating method
and function settings, please refer to the instruction manuals of Gingerway smart
remote control and smart gateway.
Dear users, sincerely thank you for choosing our products. For your convenience
of installing and using this product, please read this manual carefully before use.
Gingerway smart RF switch is new general tow-way full digital communication
smart switch. Via the main control equipments(like remote control, gateway ), you
can reliably and easily control and query the on-o󰀨 state of the switch.
Descriptions
Main Features
1. New generation Z-Ginger® smart home control network, a real full digital
two-way communication wireless network. It can penetrate the walls, with fast
response speed, high reliability and strong anti-interference capability.
2. With capacitive touch screen, fit energy saving lamp, fluorescent lamp,
incandescent lamp and various types of lamps.
3. Ultra-low standby power consumption: ≤ 0.03W.
4. Maximum load power: 1000W.
5. GW-6321, GW-6322, GW-6323: with patented power technology P-Ginger®:
fit single-wire wiring method(Without Neutral Line ), also fit double-wire wiring
method(With Neutral Line).
Main Functions
A. Manual control on-o󰀨 function
Press the capacitive touch keys can manually control the on-o󰀨 of the lamps, this
function is same as the traditional switch. If the power recovered after a power
cut, the switch will be at o󰀨-state automatically .
B. Remote control on-o󰀨 function
Via the main control equipments, you can remote control the on-o󰀨 state of the
switch, and the operating result will feed back to the main control equipments.
C. Scene controlling function
Controlled by main control equipment, this smart RF switch can be combined with
other Gingerway smart devices into di󰀨erent scenes in any way you like.
D. Query function
You can query the on-o󰀨 state of the smart RF switch through the main control
equipment.
Product Wiring Diagram
N
L
N
L
N
L
Live Neutral Lamp3 Lamp2 Lamp1
N
L
GW-6321
Smart RF 1-Gang wall touch switch
Single-wire wiring method
(Without Neutral Line)
Live Neutral Lamp3 Lamp2 Lamp1
GW-6321/GW-7321
Smart RF 1-Gang wall touch switch
Double-wire wiring method
(With Neutral Line)
LNLoad Lamp L
N
Load Lamp
N
L
N
L
N
L
Live Neutral Lamp3 Lamp2 Lamp1
N
L
GW-6322
Smart RF 2-Gang wall touch switch
Single-wire wiring method
(Without Neutral Line)
Live Neutral Lamp3 Lamp2 Lamp1
GW-6322/GW-7322
Smart RF 2-Gang wall touch switch
Double-wire wiring method
(With Neutral Line)
L
N
Load Lamp L
N
Load Lamp
N
L
N
L
GW-6323
Smart RF 3-Gang wall touch switch
Single-wire wiring method
(Without Neutral Line)
Live Neutral Lamp3 Lamp2 Lamp1
L
N
Load Lamp
N
L
N
L
GW-6323/GW-7323
Smart RF 3-Gang wall touch switch
Double-wire wiring method
(With Neutral Line)
Live Neutral Lamp3 Lamp2 Lamp1
L
N
Load Lamp
Assembly Drawing
Snap Joint
Mountting Screw
Wiring Screw
Front Cover Bottom Shell
Touch Panel

Power Supply 110 - 250VAC
Standby Power Consumption ≤30mW
Wireless Operating Frequency 433MHz
Wireless Transmit Power ~10dbm
Wireless Receiving Sensitivity ≤-105dbm
Maximum Load Power 1000W (Maximum Load Current ≤5A)
Minimum Load Power 5W(Only for single-wire wiring method,
double-wire wiring method without limit )
Mounting Box Size 77mm*77mm*38mm
Working Temperature 0-60℃
Relative Humidity ≤80% (Non-condensing)
Dimensions (L * W * H) 86mm×86mm×37mm
Weight 129 ~156g
Technical Parameters
1. Please hire professional electrician to install or disassemble the switches. The
power must be cut o󰀨 before installing or disassembling.
2. The switches are forbidden to be installed in outdoors, bathroom and other
humid environments.
3. The sum of each gang load can't be greater than the rated total power.
4. When the power recover after the power outage of the switch, the lamp will
ash normally for once.
5. If the lamps slightly ikcer when the power on, suggested that adjust( turn up
slightly) the power of lamps.
6. Fluorescent lamp is recommended to use electronic rectier.
Notice
Warranty Terms
Gingerway products are guaranteed for 2 years since the date of purchase.
During the warranty period, if Gingerway products malfunction(not contain articial
damages) under normal circumstances, they can be free repaired or exchanged
at local dealer with the purchase invoice.
1. If due to quality failure during the warranty period, the maintenance is free in
rst year, only the component cost will be charged in the second year.
2. Disassembling Gingerway product components without the permission of
our company or the local client center, our company will no longer bear the free
warranty responsibility .
Note: Shenzhen Gingerway Technologies Co., Ltd reserves the right of final
explanation for above terms.
0678
Shenzhen Gingerway Technologies Co., Ltd.
Address: 3-Floor, Building A6, Xingye Industrial Park, Zhongshanyuan No.2 Road,
Nanshan District. Shenzhen, Guangdong, China.
Tel :[phone] Fax :[phone]
Website: www.gingerway.com