Glab Wah-Pad User manual

User Manual
Wah-Pad

1
Wah-Pad User’s Manual Ver. 1.1
The wah-pad is a device connectable to the Guitar System
Controller (GSC) enabling switching on a wah-wah effect by
placing a foot on it and switching off a wah-wah effect by removing
a foot. The wah-pad should be placed beneath a wah-wah effect
and the wah-pad’s connector should be plugged into the GSC’s
LINK connector.

2
The GSC enables the two wah-pad’s modes of working:
- to switch on at any preset a loop
to which a wah-wah effect is
connected (“adding to preset
a wah-wah” mode),
- to switch on No. 5 preset in each
bank (“changing preset” mode
enabling to change settings of
a whole system).
The wah-pad connecting and the GSC
setting are described in the Guitar
System Controller User’s Manual.

3
To prevent moving a wah-wah effect along the wah-pad there
should be stuck attached self adhesive elements. They should be
placed on the upper wah-pad surface possibly close to a wah-wah
legs as it is shown on the below picture.
The wah-wah effect switch should be at active position and
preferably blocked mechanically

4
Technical specification:
No. Model Dimentions
[mm]
Weight
[kG]
Product
code
1. Wah-pad (wah-wah pad) 260 x 100 x 13,5 0,55 00802
This manual refers to products specified in the table above.

5
DO NOT PLACE THIS PRODUCT INTO THE WASTE CONTAINER !
This device is marked with a cross-lined waste container symbol according to
2002/96/EU Directive on Waste Electric and Electronic Equipment.
Such marking informs that after usage equipment can not be trashed together
with other household waste.
An user obligation is to return wasted equipment to a party collecting wasted electric and electro-
nic equipment. Parties collecting such equipment organise a system, including local collection
points, shops and other units, allowing to return such equipment. This Directive assures an user
free of charge utilisation of such delivered equipment.
This device is made of materials which can be recycled or utilised after becoming out of use.
Proper handling of wasted electric and electronic equipment reduce demand for row materials
and contribute in avoiding harmful consequences for environment and health of people caused
by dangerous components and not proper storing and utilising of such equipment.

COMPANY ADDRESS
ELZAB S. A.
ul. Kruczkowskiego 39, 41-813 Zabrze, Poland
phone [phone], fax [phone]
Web site .................................................................
www.glab.com.pl
Export Department ................................................
phone [phone] inter. 34,
[phone] inter. 366
e-mail: [e-mail]
Technical Support ..................................................
phone [phone]
[phone] inter. 419, 220
e-mail: [e-mail]
Drawing No. G04INA00