Glacier bay 4168F User manual

THANK YOU
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this sink. We strive to continually
improvement needs. Thank you for choosing Glacier Bay!
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
Model #4168F
TOPMOUNT DOUBLE BOWL 60/40 KITCHEN SINK
Item 1001853884

2
Table of Contents
Safety Information ................................ 2
Warranty ........................................ 2
Pre-Installation................................... 3
5Topmount Installation
............................
6Care and Cleaning ................................
Safety Information
Before installing this sink, read this instruction manual carefully.
It contains important information concerning the safe installation,
operation, and maintenance of your sink.
Retain this manual for future use. In the event of sale, transfer, or
relocation, ensure this manual remains with the sink.
NOTICE: Avoid leaving wet sponges, salt, and corrosive substances
on the sink for long periods of time. Lines and scratches may be
caused by improper use of the sink.
NOTICE: Do not place the sink on its side as there is a risk of
damage.
WARNING: Keep all packaging materials out of the reach
of children to prevent possible choking or suffocation.
WARNING: Use caution when installing the sink. There is
the installation location.
CAUTION: Never place hot objects such as hot pans
on the sink. Wait until the object has cooled or use a heat
resistant plate when placing hot objects on the sink surface.
Warranty
LIMITED LIFETIME WARRANTY
This limited lifetime warranty is extended to the original purchaser of this sink. The manufacturer warrants this sink to be free from all
manufacturing defects in material and workmanship. The manufacturer will repair or replace, at no charge, excluding labor, any sink
that is proven to be defective under normal use. An equivalent replacement will be issued to the original owner provided the defective
sink was installed in accordance with the installation procedures, used and cleaned as recommended, and not damaged due to abuse,
misuse, or negligence. Chips, scratches, and stains are not deemed to be manufacturing defects. The manufacturer will not be held
liable for chips, scratches, and stains that can occur under normal use over a period of time. Please refer to the cleaning instructions
to maintain your sink in its original appearance. The manufacturer shall not be held liable under this warranty where the sink has been
used in a non-domestic application, improperly installed, or damaged from the impact caused by a heavy object being dropped on the
sink or from improper handling.
The manufacturer shall not be liable for any inconvenience or expense for material or labor related to the removal or replacement of a
defective sink or for any loss or damage to any person or property whatsoever resulting from the defective sink. All transportation costs
to and from the point of purchase will be the responsibility of the purchaser.
Any sink returned must be in the original packaging and include all the accompanying accessories, parts, and documentation. The
manufacturer reserves the right to inspect any sink reported to be defective prior to replacement of the sink.
WARRANTY EXCLUSIONS
all sink accessories to be free from manufacturing defects for one year. The manufacturer is not responsible or liable for indirect,
special, or consequential damages arising out of or in connection with the use or performance of its products and its liability under this
warranty is limited to the replacement of the defective material at the location of purchase.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. The manufacturer
particular purpose is limited in its duration to the duration of the written limited warranties set forth herein.
OBLIGATION OF THE ORIGINAL OWNER
No employee, agent, or other person is authorized to provide any warranty on behalf of The HomeDepot for a Glacier Bayproduct thatis in
addition to or different from the warranty stated above unless the warranty has been previouslyapproved by an authorized representative.
Contact the Customer Service Team at 1-855-HD-GLACIER or visit www.HOMEDEPOT.COM/GLACIERBAY.

3 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Pre-Installation
PLANNING INSTALLATION
Compare all parts to the Hardware Included and Package Contents lists and verify that all parts are included. Inspect all parts for
damage. If there are missing parts or visible damage to the sink, do not install and contact the Customer Service Team at 1-855-HD-
GLACIER.
TOOLS REQUIRED
Silicone
sealant Safety goggles Phillips screwdriver Hammer
Jigsaw Drill and
drill bit
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
Part Description Quantity
AA Mounting clip 12

4
Pre-Installation (continued)
PACKAGE CONTENTS
C
Part Description
A Template
B Sink
CBottom grid
D Cover
E
F
G
Basket
Quantity
1
1
2
1
1
1
1
H
I
J
1
1
1
Part Description
K
L
M
N
O
P
Q
Quantity
1
1
1
1
1
1
1
Screw
Strainer bowl
Strainer basket
Gasket
Screw slide guide
Double lip seal
Strainer bowl
Gasket
Double lip seal
Waste bowl
R
S
T
1
1
1
Gasket
Lock nut
Waste bowl
Flat gasket
Fitting
D
E
G
H
I
J
K
L
F
M
R
S
T
O
P
Q
N
B
A

5 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Topmount-Installation
NOTICE: It is strongly suggested that you contact a professional
countertop fabricator when installing the sink as a topmount.
1Preparing the installation location
□If necessary, remove the old sink and disconnect the
water supply lines underneath the sink.
□If your sink does not already have an existing installation
location, place the template (A) on the sink installation
location and trace the locations to cut out.
□Check inside the cabinet for any obstructions prior to
cutting.
□Cut out the location for the sink.
A
2Installating the sink
□
Insert the clip into the channels. See the diagram below for
recommended clip placement.
Insert the sink into the hole. Rotate the clip. Tighten the
clips to secure the sink.
Apply a narrow bead of silicone adhesive sealant evenly all
around the sink anges.
□
□
Immediately remove excess sealant.□
B
COUNTERTOP B
AA
CHANNEL
SILICONE CAULK
(NOT FURNISHED)
Recommended
Clip Placement

6
Care and Cleaning
□Do not use abrasive cleaning creams or powders, concentrated caustic soda, formic acid, or anything highly corrosive. For more
□
eraser sponges, vinegar-based cleaners, and lime removers.
□Rinse the sink with hot water and dry the sink with a soft absorbent cloth.
□Fruit juices, coffee, and tea can stain the surface of your sink if not removed. Rinse or wipe the sink promptly after these
substances make contact with the sink.
□Never use steam or high-pressure cleaning systems to clean your sink.
3Installing the drain assembly
Topmount-Installation
□Place the gasket (H) on top of one drain hole in the sink (B),
followed by the strainer bowl (G).
□From underneath the sink (B), position the double lip seal (I)
with grooves facing up on the drain holes, followed by the
waste bowl (J).
□From the top of the drain hole, screw the screw (F) into
the waste bowl (J).
□Position the gasket (K) at the base of the waste bowl (J)
and screw the lock nut (L) with the tting (not furnished)
to the base of the waste bowl (J).
□Insert the assembled basket (E) into the strainer bowl (G).
□Put the cover (D) and the silicone seal on the strainer.
□Place the gasket (P) on top of the other drain hole in the
sink (B), followed by the strainer bowl (O).
□From underneath the sink (B), position the double lip
seal (Q) with grooves facing up on the drain holes, followed
by the waste bowl (R).
□From the top of the drain hole, screw the screw (N) into the
waste bowl (R).
□Position the gasket (S) at the base of the waste bowl (R) and
screw the tting (T) to the base of the waste bowl (R).
□Insert the assembled basket (M) into the strainer bowl (O).
I
J
K
L
D
E
F
G
H
R
S
T
Q
M
O
P
N
B

Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
Retain this manual for future use.