Glacier bay FP1B4202SS Assembly instructions

INSTALLATION AND CARE GUIDE
THANK YOU
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this kitchen
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
OMSID#
310617862
310617858
310617871
310617866
Model#
FP1B4202SS
FP1B4202BL
FP1B4202CP
FP1B4202ORB
PULL-DOWN KITCHEN FAUCET

2
Table of Contents
Important Information..............................2
Warranty ...................................................2
Pre-Installation.........................................2
Planning Installation...........................2
Tools and Hardware Required.............2
Package Contents...............................3
Installation................................................4
Operation...................................................7
Care and Cleaning ....................................8
Troubleshooting........................................8
Service Parts.............................................9
Important Information
□Observe all local plumbing and building codes.
□Cover the drain in your sink to avoid losing parts.
□Review the care and cleaning section included in this guide.
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.
Simply return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-
434-5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental / inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
a five year limited warranty from the date of purchase, with all other terms of this warranty applying except the
duration of the warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for
more details.
Pre-Installation
PLANNING INSTALLATION
Before you begin to install this product, ensure that all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service for
replacement parts.
TOOLS AND HARDWARE REQUIRED
SILICONE
Adjustable
wrench
Safety
goggles Sealant

3 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
E
B
G
F
H
C
A
D
NOTE: *Items come pre-assembled.
Part Description Quantity
A Spray head 1
B Faucet body 1
C Deck plate 1
D Putty plate 1
E Top mounting fixture 1
F Small hex wrench 1
G Large hex wrench 1
H Water supply line 2

4
Installation
Without deck plate
With deck plate
1-1/2 in. (38 mm) Max Deck Thickness.
Ø 1-3/8 in. (35 mm) Min.
Ø 1-1/2 in. (38 mm) Max.
1 in. (25 mm) Max Deck Thickness.
Ø 1-3/8 in. (35 mm) Min.
Ø 1-1/2 in. (38 mm) Max.
8in.
E
(2)
□Rotate the two half-moon locking nuts (2) inward
before inserting the top mounting fixture (E) into
the sink.
□Insert the top mounting fixture (E) into the sink.
□Place a bead of clear silicone sealant (not
included) around the base of the putty plate (D).
Place the putty plate (D) and the deck plate (C)
on the sink.
□Rotate the two half-moon locking nuts (2) inward
before inserting the top mounting fixture (E) into
the sink.
□Insert the top mounting fixture (E) into the sink.
E
(2)
C
D
□Shut off the water supply. Remove the old faucet.
□Clean the mounting surface.
□Check for the proper thickness of the sink.
Installing the faucet with the
deck plate
2.b
2.a1 Installing the faucet assembly Installing the faucet without
the deck plate

5 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
E
G
H
Cold Line Hot Line
E
□Insert the water supply line (H) through the small
hole of the top mounting fixture (E).
□Use one hand to hold the top mounting fixture
(E) and the second hand to tighten the two
screws with the allen wrench (G) until the
locking nuts secure the top mounting fixture (E)
on the sink. Make sure the “FRONT” mark on
the top mounting fixture (E) faces the front of
the sink while tightening the screws.
NOTE: When inserting the flexible hoses through the
large hole, ensure there is no significant twisting or
deformation of the hoses prior to faucet.
3 4
Tightening the top mounting
xture Inserting the hose

6
Installation (continued)
2
B
G
E
B
□Use an adjustable wrenches to connect and
tighten the supply lines to the supply valves.
□Connect the red supply line to the hot water
supply valve.
□Connect the blue supply line to the cold water
supply valve.
□Loosen the set screw at the bottom of the faucet
□body (B). Align the set screw hole at the bottom
of the faucet to the recess on the top mounting
fixture (E) and then set the faucet body (B) to the
top mounting fixture (E). Ensure there are no gaps
between the faucet body (B) and the mounting
surface.
□Tighten the set screw with the hex wrench (G).
65 Securing the faucet body Connecting supply lines
RED
LINE
HOT
COLD
BLUE
LINE
CAUTION: Ensure the supply lines do not kink, twist or
bend into a “V” or “L” shape during installation. Do not use
if there are visible signs of damage.

7 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Operation
A
1 Checking for leaks
□Detach the spray head (A) from the pull-down
spray hose (H). Hold the pull-down spray water
supply line (H) firm to prevent it from retracting
into the faucet body (B).
□Ensure the handle is in the off position. Turn the
hot and cold water supplies on and check all
connections for leaks. If leaks are discovered,
check the connections to ensure they are tight
and properly secured.
□Lift the handle to allow the water to run for
approximately one minute. This flushes away
any debris that could damage the internal parts.
□Turn the water off and reattach the spray head
(A).

8
Care and Cleaning
Troubleshooting
□To clean, wipe down with a damp cloth and towel dry.
□Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
NOTE: Refer to the service parts section in this manual
for a detailed drawing showing the location of the parts
listed below.
Problem Possible Cause Solution
Leaks underneath handle. □Locking nut has come loose.
□O-ring on cartridge is dirty or
damaged.
□Tighten the locking nut.
□Clean or replace O-ring.
There is no hot or cold
water.
□The water supply line was
acccidentally kinked during
installation and is limiting the
water flow through.
□Reinstall the water supply line.

9 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Service Parts
* Specify finish
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
DATE CODE：
DO NOT REMOVE
1-888-328-2383
HOT
Part Description Part No.
1 Set Screw (M5*4L) A075210
2Metal Handle Assembly A662A66
3 Trim Ring A103121
4 Adjusting Ring A104259
5 Ceramic Disc Cartridge A507906N-31
6 Screw (M5 *8mm L) A075208
7 Magnetic Holder A663B01
Part Description Part No.
8 Seal A088093N
9 Pull-Down Spray Head A568028N
10 Cover Plate & Putty Plate A667003
11 Top Mounting Fixture A527105
Faucet ID Tags can
be found by removing
the hot water handle
NOTE: Many replacement cartridges, aerators,
and drain assemblies can be purchased at
your local The Home Depot store or online at
HOMEDEPOT.COM.

Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
Retain this manual for future use.