Gledopto HDMI Sync Box Installation instructions

Ⅲ. Packing list:
Ⅰ. Product description:
Input Voltage: DC12~24V
Size: 160x90x22mm Model NO.: GL-SN-001
Ouput Current/Channel: 6 A max
Protection rate: IP20
Total Output Current: 10 A max
Operating Temperature: -2 0°C~60 °C
Ⅱ. Specification:
Gledopto HDMI SYNC Box
User Instruction
GLEDOPTO HDMI SYNC Box processes the HDMI signals, so that the
connected LED strip changes color or brightness synchronously with the
TV screen. Changes in color or brightness are based on the entire
background, not on different areas of the TV. It can also be paired with
Gledopto Pro or Plus products.
User Instruction x 1
1x2 HDMI Splitter x 1 Splitter power cord x 1
24V 5m RGB strip x 1
1.5M HDMI Cable x 1 0.3M HDMI Cable x 1
HDMI SYNC Box x 1
.Installation diagram
1
3
5
7
2
4
6
TV
HDMI
HDMI
HDMI
1x2
Splitter
HDMI
RGB strip
Power
supply
Splitter
power
DVD PC PS4 SET-TOP BOX
HDMI IN
Gledopto Sync HDMI Box
User Instruction

GL-SN-001
. Detailed description:
. Pairing with Gledopto's PRO/PLUS version led
products:
. Function diagram: 3. Button ③:
Press this button, the brightness of RGB led strip is “-”,8 levels for
adjusting the brightness.
In the Lighting Mode, press and hold this button for two seconds,
the color of RGB led strip will be changed once, seven colors are
optional: White→Purple→Light Blue→Yellow→Blue→Green
→Red(final color);
4. Button ④:
Press this button, the brightness of RGB led strip is “+”, 8 levels
for adjusting the brightness.
In the Lighting Mode, press and hold this button for two seconds,
the color of RGB led strip will be changed once, seven colors are
optional: Red→Green→Blue→Yellow→Light Blue→Purple
→White(final color).
In the HDMI Mode, press and hold this button for two seconds,
then switch on the Gleopto’s PRO/PLUS version led products, the
PRO/PLUS led products have paired with this HDMI Sync Box. All
the PRO/PLUS led products can sync with the TV monitor as well
(See the VII diagram).
5. Power indicator:
Indicator lamp is green while push the button ①.
6. HDMI port:
HDMI input.
7. RGB strip port:
Connecting RGB strip.
Push the button,
enter "HDMI Mode".
Paired successfully.
Press and hold for 2 seconds.
Switching on the Gleopto's
PRO/PLUS version led products.
8. Screw-in structure:
Connect the RGB strip and tighten.
9. Power portport:
Connecting power.
1 2
3
4
4 3 2
5
1
67 9
8
Screw Screw
Plug in Plug in
Plug in
PLUS/PRO PLUS/PRO
1. Button ①:
Power ON/Power OFF.
Push the button, the sync box is on, and you have entered “Lighting
Mode”.
2. Button ②:
Push the Button ①, and then push the Button ②，now you have
entered the “HDMI Mode”, then RGB led strip light can sync with
monitor.
Insert the wire
(Push the button) (Press and hold for 2 seconds)