Glen GL 4051 Ex User manual

®
FOOD PROCESSOR
GL 4051 Ex
USER’S GUIDE
®
The pulse of modern kitchen
Glen Appliances Pvt. Ltd.
EPIP Phase II, Thana Baddi, Tehsil Nalagarh, Distt. Solan (H.P.)
I-34, DLF Industrial Area Phase-I, Faridabad
Helpline : 0129-2254191 Fax 0129-2274344
E-mail : [email protected] Website www.glenindia.com
Head Office

We welc ome yo u t o t he Gle n f am ily. A fam ily th at cares
fo r your heal th and re spect s your tast e.
At G le n we hav e a r ep ut ation of bringing you t he mo st
in no vative an d adva nced f eat u res t o make y our c ooki n g
con veni e nt and e nj oyab le . Yo ur newly a c quired G len
fo od pro c esso r be ars the sa me di sti nct ive mark o f
exce ll en ce .
In your kitchen you need to do over 16 tasks even before you
start coo kin g. The Glen foo d proc ess or does the m al l,
fr om chi ppi ng, chopping, cr um bi ng, crushing, min ci ng ,
ma sh in g an d julienn in g to k ne ad in g, grinding, juicing,
bl en di ng , pureeing, s hre ddi ng, sl i cin g to whis kin g and
mu ch more . Le ngt hy k itc hen cho res red uce d to jus t a few
seconds.
Mo reo ver wit h it ’s l ow R PM i t gi ves you the des ire d
co ars ene ss wh ile processing food. A wide bowl and large
sh ar p bl ad es ens ur e mu ch bette r pro ces sin g th an
co nve nti ona l mi xie s. M anu fa ctu red unde r t he str i nge s t
qua l ity norm s wi t h t he hi g hest gra d e raw ma te ri al s i t
co me s with a po werful 500 W moto r t o en sur e a trouble
free performance for years to come.
1
Technical Specifications
Identifying your Food Processor
Using your Food Processor
Using the Liquidiser Jar
Using the Dry Grinder Jar
Using the Centrifugal Juicer
Processing Chart
Cleaning the Bowl, Blades, Cover, Pusher,
Liquidiser and Dry Grinder Jar
Overload Protection
Safety Precautions
2
3
5
7
8
9
10
11
12
12
CONTENTS
Packing List : Basic unit, Bowl, Bowl cover, Food pusher,
Plastic blade, Stainless steel blade, Slicing cum shredding disc
(reversible), Chipping disc, Liquidiser jar, Grinder jar, Spatula,
Centrifugal juicer.

2
TECHNICAL SPECIFICATIONS
Voltage
Power
Rating
Motor
Material (Basic Unit)
Speed Control
(Bowl and cover)
(Liquidiser Jar)
(Grinder Jar)
Motor Speed (RPM)
Weight
Carton Dimensions
(mm) (w x d x h)
Capacity
Processor Bowl
Liquidiser Jar
Grinder Jar
Polycarbonate
Polycarbonate
Stainless Steel
230 V AC 50Hz
500 W
30 minutes
Universal
A.B.S.
PULSE
OFF
1-Low, 2-Medium, 3-High
Liquidiser Drive : 18000 (approx)- No Load.
Food Processor Drive : 3000 (approx)- No Load.
7 kgs approx
415 x 390 x 275
1.0 litres (0.75 litres for processing)
1.0 litres (0.75 litres for processing)
200g (depending on ingredients)
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Specifications subject to change without prior notice
3
IDENTIFYING YOUR FOOD PROCESSOR
CONTROL KNOB
LIQUIDISER DRIVE
SAFETY LID
FOOD PROCESSOR
DRIVE SHAFT
BOWL COVER
RELEASE KNOB
DRY GRINDER JAR
LIQUIDISER JAR

5
Before using ensure that
the food processor is placed
on a slab in a stable
position. Lock the liquidiser
drive safety lid. Lower the
processor bowl on to the
power drive shaft and turn
anticlockwise to lock. The
lugs on the basic unit
should precisely fit the slots
on the bowl.
Using the Blades
Select the blade to be used
as per the function to be
performed. The stainless
steel blade is used for most
functions like chopping,
crumbing, crushing,
mashing, mincing, pureeing
etc. The plastic blade helps
knead atta or is used for
churning or beating.
Add the food to be
processed to the bowl.
Place the bowl cover over
the food processor bowl and
rotate anti-clockwise to
lock. The food to be
processed can also be
added through the feeder
tube while the machine is
functioning.
Note : The food processor
will not function until the
bowl cover is locked
properly.
Connect the food processor
to a wall AC outlet. Switch
ON or OFF using the knob.
The coarseness of the food
to be processed can be
controlled using the three
different speed settings.
USING YOUR FOOD PROCESSOR
VEG RETAINER
FOOD PUSHER
BOWL COVER
SLICING CUM SHREDDING
DISC (REVERSIBLE)
CHIPPING DISC
STEM
BOWL
PLASTIC BLADE
JUICER PUSHER
JUICER COVER
FILTER
JUICER BODY
STAINLESS STEEL BLADE
SS BLADE SAFETY COVER
CENTRIFUGAL JUICER
4

7
USING THE LIQUIDISER JAR
Remove the lid on the
liquidiser side by turning
clockwise. Place the liquidiser
jar on to the drive and rotate
anti-clockwise to lock.
Add the ingredients to be
processed. Place the lid on
top of the liquidiser jar and
rotate clockwise to lock the
slugs.
The liquidiser jar should not
be filled more than 2/3 of
the jar capacity. Switch ON
the machine and turn to
position 1. The pulse
position can be used for
additional froth in milk
shakes, coffee or lassi.
Once the operation is
complete switch OFF the
machine and remove the
liquidiser jar by rotating
clockwise.
6
Using the Discs
The chipping disc is used to
make finger chips. The
slicing disc is used to slice
vegetables or fruits. The
shredding disc can be used
for shredding vegetables
like carrot, cucumber,
potatoes or cheese. It can
also help shred vegetables
for chinese dishes.
Select the disc, insert the
stem from below and rotate
clockwise to lock. Now
insert the disc onto the
drive shaft.
The Glen Food Processor
is provided with a new SS
Vegetable Retainer. This
retainer holds the food
being processed securely
in the feeder tube and
enhances the processing
quality of the food. It also
prevents the bounding
back of the food once it
strikes the processing
disc.
SS Vegetable Retainer
The Twin Feeder Tube
The Glen Food Processor
has a twin feeder tube. This
enables better processing
of different food sizes and
also reduces the chances of
the food bouncing back
once it contacts the high
speed discs. Choose the
tube in accordance with the
size of the food to be
processed.

8
USING THE DRY GRINDER JAR
Place the grinder jar
on to the drive and rotate
anti-clockwise to lock.
Add the ingredients to be
processed. Place the lid on
top of the grinder jar
and press down to close.
Hold the lid firmly during
processing to avoid
spillage.
The grinder jar should not be
filled more than 2/3 of the
jar capacity. Switch ON the
machine and turn to
position 1 and gradually to
higher positions if required.
Give a break of 1 minute after
three minutes running.
Once the operation is
complete switch OFF the
machine and remove the
grinder jar by rotating
clockwise. Handle carefully
as it may be hot.
9
Switch ON the food
processor to position 1.
Insert the pre-cut hard
fruits or vegetables to be
juiced through the feeder
tube. Push down with the
pusher. The juice gets
collected in the food
processor bowl while the
pulp accumulates along the
walls of the filter. For
cleaning remove the filter,
shake in a bin and wash
under tap water.
Note : Remove the pulp &
restart in case of excessive
vibrations during juicing.
Due to vibrations a few drops
of juice may even drop out.
Place the filter mesh inside
the juicer body and rotate it
clockwise using the top
slugs to lock. Place the
assembly on to the drive
shaft.
Place the juicer cover on top
of the food processor bowl
and rotate anti-clockwise to lock.
Position the lid on the
liquidiser side. Place the
bowl on the food processor
drive shaft and turn anti-
clockwise to lock.
USING THE CENTRIFUGAL JUICER

11
Unplug the food processor
from the mains.
Disassemble the pusher,
bowl cover, bowl and
remove the blades/discs.
CLEANING THE BOWL, BLADES, COVER, PUSHER,
LIQUIDISER & DRY GRINDER JAR
Unlock the disc from the
stem. Clean the blades or
discs in tap water. Handle
these carefully as they have
very sharp edges.
When the appliance is
stored for long durations, it
is advisable to apply edible
oil on the SS cutting blade.
Wash the bowl, bowl cover
and the pusher in tap water.
Use soapy water and
sponge to remove oily
substances or deposits. Do
not use metal/nylon
brushes or boiling water.
Pour a little liquid soap and
water into the liquidiser /
chutney jar, close the lid
and run it on position 1 for a
few seconds.
Pour out the soap solution
and wash with tap water.
For the dry grinding jar
remove the contents from
the jar. Wipe the jar with a
dry cloth and store.
10
PROCESSING CHART
BLADES
FUNCTION SPEED
Slicing Disc
Shredding Disc
Chipping Disc
Kneading Blade
Chopping Blade
Liquidiser Jar
Grinder Jar
Centrifugal Juicer
Slicing of onions, potatoes, radish,
coconut, cucumber etc.
Shred carrots, radish etc.
For finger chips, cabbage cutting etc.
Atta Kneading (250 gms)
For removing shell of green peas
Chopping onion, leafy vegetables
Mincing meat for keema
Crumbing bread
Tomato pureeing
Potato mashing
Mixing batters
Making shakes & lassi
Grinding spices preparing chutney & pastes
Extracting juice from hard fruits,
like apple, pineapple &
vegetables like carrot
1
1
1
1
2
1 & 2
1,2 & 3
1,2 & 3
1 & 2

12
OVER LOAD PROTECTION
To protect the motor from burn
outs, in case of overload, the
appliance is fitted with an
automatic overload protector
under the base of the basic
unit. If the motor stops it is an
indication of e xc es s load.
Switch off the unit, take out
excess material from the jars.
Wait for 2/3 minutes and press
t h e o v e r l o a d p r o t e c t i o n
plunger. Then restart the unit.
Note : Ove rlo ad pro tec tio n
plun ger is to be pressed to
restart only after 2/3 minutes.
SAFETY
PRECAUTIONS
Keep the machine away from
direct heat and sunlight, at
a suitable height on a flat
surface for easy operation.
Do not use on top of a cloth
or plastic sheet as these
may get sucked in and block
the ventilation slots on the
bottom of the machine.
Do not use the food processor
empty.
Do not allow children to
handle the food processor.
Do not attempt to attach or
re mov e t he bla des or jars
while the drive shafts are still
in motion.
Do not push the food through
the feeder tube with fingers
or spoons etc, always use the
food pusher provided.
Do not immerse the basic unit
in wat er.
Re mov e the b l a d e / d i s c
before emptying the contents.
Handle the blades / discs with
care as they are very sharp.
Do not a l l o w t h e f o o d
c o l l e c t e d in t he bo w l to
accumulate so much so as to
touch t h e d i s c s duri n g
operation. This could thrust
the disc u p w a r d s and cou l d
cause damage.
Always use the spatula for
scraping off the contents from
the side wall of bowl/jars.
Before running the machine
ensure that the jars and lids
are firmly placed and locked.
Do not remove or replace jars
when the motor is on.
Do not overload the machine.
In case of smoke or smell put
off the machine.
WARRANTY
THIS GLEN Food Processor is fully warranted against any defect arising out of defective
materials or faulty workmanship for a period of one year from the date of purchase. Should
any defect develop in this product, the customer should bring the product to the nearest
authorised service centre, where the company undertakes to get the product repaired free
of charge. The motor is fully warranted against any manufacturing defects for a period of
5 years. from the date of manufacture (inscribed on the motor).
Terms to Warranty
•
• No repair work should be carried out by any unauthorised person.
• The Food Processor should be used as per the directions given in the user’s guide. Any
defects caused by improper or reckless use are not covered under warranty.
• No modification/alteration of any nature is made in the Food Processor.
• Normal wear and tear of the product is not covered under warranty.
• Plastic parts are not covered under warranty.
The Bill/Cash Memo should be presented.
The company accepts no responsibility for any consequential losses arising out of misuse or
negligence on the part of the user.
PRODUCT : FOOD PROCESSOR FP 4051 Ex
DATE OF PURCHASE
SERIAL NUMBER
NAME OF OWNER
ADDRESS
BILL NO. DATE
DEALER’S STAMP & SIGNATURE
Table of contents
Other Glen Food Processor manuals