Glensound GS-PM4 User manual

GS-PM4
Dante Network Paging Microphone
PRODUCT DETAILS
6 BROOKS PLACE MAIDSTONE KENT ME14 1HE. ENGLAND. TEL: [phone]
Visit our Website at www.glensound.com FAX: [phone]

Glensound Electronics Ltd
Thank you for choosing a new Glensound product.
All rights reserved.
Information contained in this manual is subject to change without notice if
in doubt please contact us for the latest product information.
If you need any help with the product then we can be contacted at:
Glensound Electronics Ltd
1 – 6 Brooks Place
Maidstone
Kent
ME14 1HE
United Kingdom
Telephone: [phone]
Fax: [phone]
EMAIL ADDRESSES
General enquires: [email protected]
Technical enquires: [email protected]
Sales enquires: [email protected]
Page 2 of 20

PRODUCT WARRANTY
All equipment is fully tested before dispatch and carefully designed to
provide you with trouble free use for many years.
We have a policy of supporting products for as long as possible and guar-
antee to be able to support your product for a minimum of 10 years.
For a period of one year after the goods have been despatched the Com-
pany will guarantee the goods against any defect developing after proper
use providing such defects arise solely from faulty materials or workman-
ship and that the Customer shall return the goods to the Company’s works
or their local dealer.
All non-wear parts are guaranteed for 2 years after despatch and any de-
fect developing after proper use from faulty materials or workmanship will
be repaired under this warranty providing the Customer returns the goods
to the Company's works or their local dealer.
Page 3 of 20

CE
EU DECLARATION OF CONFORMITY
GS-PM4
Visual indicator Dante intercom
This declaration of conformity is issued under the sole responsibility of
the manufacturer.
This equipment is manufactured by Glensound Electronics Ltd of Brooks
Place Maidstone Kent ME14 1HE is CE marked and conforms to the
following Union harmonisation legislation:
Emissions: BS EN55032:2015
Immunity: BS EN55035:2017
Signed for and on behalf of Glensound Electronics Ltd.
Gavin Davis Managing Director
Maidstone Kent England
Date: 15/02/2022
Page 4 of 20

RoHS DIRECTIVE
RoHS 2 Directive 2011/65/EU restricts the use of the hazardous
substances listed below in electrical and electronic equipment.
This product conforms to the above directive and for these purposes the
maximum concentration values of the restricted substances by weight in
homogenous materials are:
Lead 0.1%
Mercury 0.1%
Hexavalent Chromium 0.1%
Polybrominated Biphenyls 0.1%
Polybrominated Diphenyl
Ethers 0.1%
Cadmium 0.01%
Page 5 of 20

WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT REGULATIONS 2006 (WEEE)
Glensound Electronics Ltd is registered for business to business sales of
WEEE in the UK our registration number is:
WEE/JJ0074UR
Page 6 of 20

Page 7 of 20

GLENSOUND PM4
HANDBOOK CONTENTS
Description Issue 1 Page No.
Contents......................................................................................
PRODUCT WARRANTY ....................................................................................................................... 3
EU DECLARATION OF CONFORMITY ................................................................................................ 4
RoHS DIRECTIVE ................................................................................................................................. 5
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT REGULATIONS 2006 (WEEE) ................. 6
HANDBOOK CONTENTS ..................................................................................................................... 7
OVERVIEW ........................................................................................................................................... 8
GS-PM4 FRONT PANEL LAYOUT ....................................................................................................... 9
GS-PM4 REAR PANEL LAYOUT ....................................................................................................... 10
NORMAL OPERATION ....................................................................................................................... 11
Setup Mode ........................................................................................................................................ 11
Keypad Operation .............................................................................................................................. 12
Specifications ..................................................................................................................................... 13
GPIO Pinout ........................................................................................................................................ 13
XLR Pinout ......................................................................................................................................... 13
CONNECTING THE GS-PM4 UNIT TO A DANTE NETWORK .......................................................... 14
Getting Dante Controller ................................................................................................................... 14
Connecting GS-PM4 device to the network ...................................................................................... 14
Audio Over IP Network ..................................................................................................................... 14
Running Dante Controller ................................................................................................................. 15
Dante Controller TIP ......................................................................................................................... 15
Device not showing up in Dante Controller ...................................................................................... 16
UPDATING FIRMWARE ..................................................................................................................... 17
Equipment needed ........................................................................................................................... 17
Instructions ....................................................................................................................................... 17
UPDATING THE ULTIMO CHIPSET ................................................................................................... 22
Finding Out Current Installed Version .............................................................................................. 22
Finding Out What The Latest Available Version Is ........................................................................... 22
Updating the device .......................................................................................................................... 22
Page 8 of 20

OVERVIEW
Our GS-PM4 utilises the reliable and proven DanteTM network audio transmission
protocol to allow real time distribution of uncompressed audio across standard
networks. As such the GS-PM4 is fully compatible with other manufacturers’
equipment using the Dante protocol.
All units in the system are designed to be very easy to use for the operator and
simple to setup for the technician. They includes all the basic functionality required
for small intercom systems and none of the overly complex installation requirements
normally associated with large systems.
Page 9 of 20

GS-PM4 FRONT PANEL LAYOUT
1. Microphone Input
3-Pin XLR Connector. Support condenser and dynamic microphones
2. Zone Talk Buttons
Used to talk out throw the PM4 illuminated buttons indicate when a Zone is Open/Live
3. Power LED
This LED indicated the power status of the device. This LED also doubles to indicate the
status of the configuration mode.
4. Scribble Strips
Give the user a place to write down zone allocations
Page 10 of 20
1
2
3
4