Global American Inc. 1507603 User manual

Quick Reference Guide
Mini PCI Serial Interface Module 1507603

Copyrights
This Quick Reference Guide is copyrighted and all rights are reserved. It does not allow any
non authorization in copied, photocopied, translated or reproduced to any electronic or machine
readable form in whole or in part without prior written consent from the manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special, incidental or
consequential damages arising from the use of inability to use the product or documentation, even
if advised of the possibility of such damages. The manufacturer keeps the rights in the subject to
change the contents of this manual without prior notices in order to improve the function design,
performance, quality and reliability. The author assumes no responsibility for any errors or
omissions, which may appear in this Quick Reference Guide, nor does it make a commitment to
update the information contained herein.
Trademarks
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned herein are mentioned for
identification purposes only, and may be trademarks and/or registered trademarks of their
respective companies or owners.

1.1 <Connector Location>
JCSEL1
CN_COM1/2 CN_COM3/4
JCSEL2
1.2 <Jumper Location & Reference>
2 6
2 12
19 1
JCSEL1
JCSEL2 CN_COM1/2/3/4
1 5 1 6 20 2
1.3 <Specifications>
Specifications
Form Factor Mini-PCI TYPEIIIB
Controller OXmPCI954-LQ-A
Accessories 2X10 com port cable X2

1.4<Jumper Setting>
JCSEL1 JCSEL2
RS-232
RS-485
RS-422
RS422/485 output form COM2
1.5 <Driver Setting>
1. Please choose
Device Manager

2.
Then you can see
Other devices
3. Please choose
Other PCI Bridge Device
then press
Reinstall Driver

4. Please choose NO, not this time press Next
5 . Please choose
Install from a list on specific location.

6 . Please select file location
CDROM:\OXFORD\Ox954_V4_09
Press
OK~
7.
After Other PCI Bridge Device Driver setting please choose
PCI Serial Port then press mouse right key select properties

8. Please choose
Reinstall Driver
9. Please choose NO, not this time press Next

10. Please choose
Install from a list on specific location
press next
11.
Please select file location
CDROM:\OXFORD\Ox954_V4_09
Press
OK

12.
After driver install , please
enter Device Manager then select
PCI Communications Port (COM5)
press properties.
13. Please select
Data rate

14. Please press
Detect Crystal Frequency.
Repeat for all remaining COM ports.

Any advice or comments about our products and service, or anything we can help you
with please don’t hesitate to contact with us. We will do our best to support your products,
projects and business.
Address: Global American, Inc.
17 Hampshire Drive
Hudson, NH 03051
Telephone: Toll Free (U.S. Only) 800-833-8999
[phone]
FAX: [phone]
Website: http://www.globalamericaninc.com
E-Mail: [e-mail]