Global Point Products Digital Fun Camera User manual

Digital Fun Camera
User Manual

Page 1 of 17
1. Location of Controls

Page 2 of 17
2. Using your digital camera
2.1 Changing function modes
Press the POWER/MENU button, the camera goes into menu interface, you can
press the UP button to select and then by pressing the SHUTTER button to enter
next menu, the screen will display the following symbols, and the interpretations are
as follows:
Icon Mode
Take Photo
Self-Timer
AVI
Camera

Page 3 of 17
Continuous
Capture
Icon Mode
VGA,640*480
QVGA,320*240
Modifying
resolution

Page 4 of 17
Icon Mode
Non-Compression
Mode
Compression
Mode
Icon Mode
50Hz
60Hz
Compression
Rate
Anti
Flicker

Page 5 of 17
Battery Indicator
Icon Mean
>70%
>35%
>5%
Deleting all

Page 6 of 17
<=5%
2.2 Inserting batteries
Open the camera’s battery compartment cover and insert 2 new AAA alkaline
batteries according to its polarity shown, then close it and press the Power/Menu
button to power on the camera.
After powered on, if you want to make changes to the camera’s default settings,
please read the instructions of this manual.
Note:
--Photos will be erased when batteries are removed. Before replacing the
batteries, it is recommended to download all the files to a computer.
--Do not mix old and new batteries or of different type and brand.

Page 7 of 17
2.3 Taking photos
After powered on, the camera is ready to take photos, just press the Shutter button.
A distinct beep can be heard and a photo is
taken. The number displayed on the screen is
the remaining number of pictures that can be
taken. Two quick beeps indicate there is not
enough light to take a picture.
2.4 Sleep mode (automatic power-saving
mode)
The camera goes into sleep mode automatically after about 30 seconds of inactivity
By pressing the Power/Menu button for 3 seconds, ”Good Bye” is shown on
the screen. Two beeps will be heard at the same time and the camera goes into a
sleep mode manually.
In sleep mode, energy consumption is very low and the battery life is prolonged.
Your camera can remain in sleep mode for save power. To use your camera again
just simply press the Power/Menu button.

Page 8 of 17
2.5 Timer / AVI / Continuous Capture Mode
Press the Power/Menu button once, the first icon<camera> is the default mode.
Press the shutter button and the camera mode changes to <Take
photos-->Timer-->AVI-->Continuous Capture >. Press the Power/Menu again to
enter to the mode of your choice.
Self-Timer AVI Continuous Capture
2.6 Modifying resolution
Press the POWER/MENU button and UP button, until the icon < Modifying
Resolution > is selected, and then press the shutter button to change. Then Press
the Power/Menu again to enter the mode of your choice.
Note: Higher quality pictures can be expected with the high resolution mode. More
pictures can be taken when the low resolution mode is used.
2.7 Modify the compression rate

Page 9 of 17
Press the POWER/MENU button and UP button, until the icon < Compression > is
selected, and then press the shutter button to change. Press the Power/Menu
again to enter the mode of your choice.
Note: Higher quality pictures can be expected in the non-compression mode. In
compression mode, more pictures can be stored.
2.8 Modifying frequency
Press the POWER/MENU button and UP button until the screen displays the <
Anti Flicker>
, and press the shutter button to change. Press the Power/Menu
again to enter the mode of your choice.
2.9 Deleting all the photos saved to memory
Press the POWER/MENU button and UP button until the screen displays the "Clear
all" mode and then press the shutter button. Press the UP button to select and press
the shutter button to confirm your choice.
3. Installation and Utilization of the software program
Insert the CD in your CD-ROM drive, follow the
step-by-step instructions to finish installation.