Global Sat GD-102 User manual

GD-102
GPS DIRECTOR
Quick Start Guide v1.0

Appearance Introduction
Cover Lock Switch =|
LCD Display Power Button Set Button
Battery Cover Grip Battery Cover Grip
Cover Lock Switch
GPS DIRECTOR
E
Lanyard Hole
Calibrate E-Compass
23 4567.89"E
6 54’32.10"N
1. Short Press “Select” button to switch to Magnetic North sub-page as left screen in Direction Navigating page
after power on.
2. Long press “Select” button to enter the calibrating E-compass function as left screen.
3. Then place the device on the flat and turn it in clockwise for once to twice to complete the calibrating E-compass
4. After completing, the screen will turn to Magnetic North page and show the correct north direction.
(If not, please repeat the calibrating steps again.)
Note: Please calibrate E-compass while avoiding interference with magnetic anomalies.

Button Introduction
Button
lcon Explanation
Power Button
Set Button
Power&Set
Combo Button
SET
Power Off Status : Long Press to Power On
Main Page:
- Short Press to Turn on backlight and switch main function.
- Long Press to Turn off the device
Setup Page:
- Short Press to turn backlight on
- Long Press to return the previous page
Direction Navigating Screen :
- Short Press to switch the target page
- In five-target page ( f & a À ), Long Press to save GPS location
- In page, Long press to enable/disable data logger function ( HE)
- In t page, Long press to correct the magnetic north processing
Moving Information Screen :
- hort Press to enable/disable route calculate function ( ate 88)
- Long Press to increase the route into accumulates information, and then cleans the route information.
Accumulating Information Screen:
- hort Press to enable/disable route calculate function ( 4+ MIN >
- Long Press to increase the route into accumulates information, and then cleans the route information.
Setup Screen :
- Short press to switch the options
- Long press to confirm the options.
Power Off status : Long press to display the F/W version
Main Screen : Long press to enter setup screen

Quick Start
There are three main screen displays and setup screen in GD-102.
88:88
800 fr
eate
58:88
8868.5. 8898,
Direction Navigating Moving Info. Accumulating Info. Setup
Target Guide Current Speed AVG. Speed Manual Enter Location
Route Guide Route Period Max. Speed Device setting
Magnetic North Route Mileage Total Mileage/Period Memory Capacity
Data Logger Device Status Device Status Date/Default Recovery
Installation of Bicycle Mount
- Install@ on bike grip and put the suitable spacer @ or @into the ring of @.
- Adjust @ as the fixed angle on the grip and use @ and @ to lock the @ on grip.
© ©0© ©