GlucoCheck Test Strip User manual

Warnings
For in vitro diagnostic use (for use outside of the body only).
For single use only.
Healthcare professionals and other users testing multiple patients with this system should handle
everything that has come into contact with human blood carefully to prevent transmitting infectious
diseases, including sanitized objects.
sites is not advised as the results might not be a true reflection of the physiological blood glucose level. It
advice.
Limitations
blood concentration do not significantly affect blood glucose test results.
glucose tests.
affect results at higher levels.
About Alternative Site Testing (AST)
Test Strip
Intended Use
glucose levels to be measured by yourself at home or by healthcare professionals. It uses fresh whole blood
samples from the finger, palm, upper arm and forearm. This system is not intended for use in the
diagnosis or screening of diabetes mellitus, nor for the use on newborns.
Chemical Components
>A. niger
Storage and Handling
IMPORTANT:
first opened it.
strip.
Strip Appearance
1. Absorbent Hole
2. Confirmation Window
of the strip.
3. Test Strip Handle
Hold this part to insert the test strip into the slot of the glucose meter
4. Contact Bars
further.
STEP 1
Insert the test strip fully into the slot of the meter until it will go no further.
When the strip is fully inserted, the meter will switch on automatically and
STEP 2
drop with the absorbent hole of the test strip, and wait until the confirmation
window is fully covered. Do NOT
will start counting down.
STEP 3
After a few seconds, the meter will display your blood glucose level.
by removing the test strip and throw away the used test strip.
PLEASE WASH AND DRY YOUR HANDS BEFORE PERFORMING ANY TESTING.
Reading Your Result
fully inserted into the test slot.
The front side of the test strip should face up when inserting the test strip.
Testing Your Blood Glucose
Fasting and before meal
Reference values
If your test results are unusual or inconsistent with how you are feeling:
PLEASE NOTE: Unusually high or low blood glucose levels may be symptoms of a serious medical condition.
If most of your results are unusually high or low, please contact your healthcare professional.
NOT
rub the puncture site for approximately 20 seconds
before obtaining a blood drop as described in your Blood Glucose Monitoring System Owner's Manual.
Quality Control Testing
Questionable or inconsistent results
Please consult your healthcare professional regarding the appropriate blood glucose reference range for you.
ATTENTION
1
2
3
4
your local infection control procedures.
IMPORTANT:
EXAMPLE ONLY!
Ascorbic Acid
Summary of substances and concentrations in excess of limitation with interference
produce elevated glucose results:
Additional Information for Healthcare Professionals
involving patient blood samples. Use fresh whole blood samples only. Healthcare professionals may use test
strips to test capillary whole blood.
method results.
GlucoCheck Logic
GlucoCheck Classic
GlucoCheck Advanced
GlucoCheck-i
GlucoCheck EVOLVE
Accuracy
Note
IMPORTANT:

TaiDoc Technology Corporation
B1-7F, No. 127, Wugong 2nd Rd., Wugu Dist.,
24888 New Taipei City, Taiwan
www.taidoc.com
MedNet GmbH
Borkstra e 10, 48163 Münster, Germany
For self-testing.
4°C
40°C
Precision
Symbol Information
In vitro diagnostic medical device
Manufacturer
Consult instructions for use
CE mark
Do not reuse
Temperature limitation
Humidity limitation
Use by
Batch code
Symbol Referent
Authorised representative in
the European Community
Symbol Referent
Authorised distributor:
Homemed (Pty) Ltd, Co Reg 2003/022932/07, Tel: [phone]
Address: 100 Sovereign Drive, Route 21 Corporate Park,
Nellmapius Drive, Irene, 0157, South Africa
GlucoCheck Logic
showed the following results:
GlucoCheck Classic
showed the following results:
GlucoCheck Advanced
showed the following results:
GlucoCheck-i
showed the following results:
GlucoCheck EVOLVE
showed the following results:
User performance
85%