GMHome EF-30AKF User manual

1
Choose GMHome Fireplace, Enjoy Gorgeous & Magnificent Home
Any questions or problems, just find us at:
[email protected]
Instruction Manual
Model # EF-30AKF

2
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning
assembly.
II. Follow each step carefully to ensure the proper assembly of this
product.
III. Two people are recommended for ease in the assembly of this product.
IV. The four main types of hardware used to assemble this product are:
wood dowels, cam bolts and locks, bolts and screws.
VI. A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.

3
Parts List

4
Hardware List
ACAM LOCK 12 PCS
BCAM BOLT 12 PCS
CWOOD DOWEL 6 PCS
DBOLT 10 PCS
EWRENCH 1 PCS
FDOOR STOPPER 2 PCS
GLARGE SCREW 2 PCS
HLARGE SCREW 3 PCS
IHANDLE 2 PCS
JMEDIUM SCREW 64 PCS

5
K16 PCS
LHINGE 4 PCS

6
Assembly Instructions
Fig.1
“Please do not over tighten cam bolts, please stop when you
feel tight”
1. Screw Cam Bolts B into
holes on part 1.
Fig.2 1. Screw Cam Bolts B into
holes on part 3.
2. Fix 2 pieces of door
stopper F on part 3 by
medium screw K.

7
Fig.3
1. Connect part 10 to part 3
by 2 pcs wood dowel C first.
2. Connect part 10 to part 3
by 3 pcs large screws H.
Fig.4
1. Install Handel I onto part 8
and part 9

8
Fig.5
1. Screw Cam Bolts B into
holes on part 4.
2. Insert wood dowel C into
holes on part 4.
Fig.6
1. Screw Cam Bolts B into
holes on part 5.
2. Insert wood dowel C into
holes on part 5.

9
Fig.7
1. Connect part 6 and part 7
to assembly unit on Fig.3 by
inserting Cam Bolts into
corresponding holes until
Base.
Fig.8
1. Tighten by rotating Cam
Locks A clockwise with
screwdriver.

10
Fig.9
1.Connectassemblyuniton
Fig.5andassemblyuniton
Fig.6toassemblyuniton
Fig.8
Install by screws

11
Fig.11 1. Connect part 2 to assembly
unit on Fig.11 by Bolts D.
2. Tighten with wrench E.
Fig.12 1. Connect assembly unit on
Fig.1 to assembly part on
Fig.11 by inserting Cam Bolts
B which on part 1 into
corresponding holes until
Base.
2. Tighten by rotating Cam
Locks A clockwise with
screwdriver.

12
Fig.13
1. Insert hardware L into
holes on assembly unit on
Fig.12.
Fig.14
1. Install parts 11 onto
hardware L.

13
Fig.15
1. Connect part 12 and part
13 to assembly unit on Fig.14
by medium screw K.
Fig.16
1. Install the door - part 8 and
part 9 on the assembly unit on
Fig.15.

14
Fig.17 1. Install the firebox into the
fireplace mantel.

15
Choose GMHome Fireplace, Enjoy Gorgeous & Magnificent Home
Any questions or problems, just find us at:
[email protected]