GMHome IF-34 User manual

1
Choose GMHome Fireplace, Enjoy Gorgeous & Magnificent Home
Any questions or problems, just find us at:
[email protected]
Instruction Manual
Model # IF-34

2
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning
assembly.
II. Follow each step carefully to ensure the proper assembly of this
product.
III. Two people are recommended for ease in the assembly of this product.
IV. The four main types of hardware used to assemble this product are:
wood dowels, cam bolts and locks, bolts and screws.
VI. APhillips head screwdriver is required for the assembly of thisproduct.
VII. Power tools should not be used to assemble this product.

3
Part List

4
Hardware List

5
Assembly Instructions
Fig.1
1. Fix Cam lock Aon part 4
and part 7 by screw C to
connect part 4 and part7.
Fig.2
1. Fix Cam lock Aon part 3
and part 6 by screw C to
connect part 3 and part 6.

6
Fig.3
1. Connect part 2 to assembly
unit on Fig.1 by wood dowel
E first
2. Fix Cam lock Aon part 2
and assembly unit on Fig.1 by
screw C to connect them.
Fig.4
3. Connect part 2 to assembly
unit on Fig.2 by wood dowel
E first
Fix Cam lock Aon part 2 and
assembly unit on Fig.2 by
screw C to connect them.

7
Fig.5
1. Connect part 5 to assembly
unit on Fig.4 by hardware B
and bolts D
2. Fix Cam lock Aon part 5
by screw C, Tighten with
wrench F.
Fig.6
1.Fix Cam lock A(This cam
lock on part 5) on bottom part
by screw C, Tighten with
wrench F.

8
Fig.7
1. Connect part 8 to assembly
unit on Fig.6 by hardware B
and bolts D
Fig.8
1. Connect part 9 to assembly
unit on Fig.7 by bolts D,
Tighten with wrench F.

9
Fig.9
NOTE:
There is electric wire in part
9, when you do last step,
please ensure the wire
terminal block exposed from
the gap on mantel.
Fig.10
1. Connect part 1 to assembly
unit on Fig.9 by hardware B
and bolts D, Tighten with
wrench F.

10
Fig.11
1. Connect part 10, part 11,
part 12, part 13 to assembly
unit on Fig.10 by hardware B
and bolts D, Tighten with
wrench F.
Fig.12
1. Connect parts 14 to
assembly unit on Fig.11 by
hardware B and bolts D,
Tighten with wrench F.
The fireplace mantel finished

11
Fig.13
1. Fix the firebox in the
mantel by screws.
Fig.14
1. Connect the wire terminal
block(one is on firebox, one is
one mantel)

12
Choose GMHome Fireplace, Enjoy Gorgeous & Magnificent Home
Any questions or problems, just find us at:
[email protected]