Gnet GW-200i User manual

GW-200i INSTRUCTION

INDEX

GNET
GNET System
GNET System
GNET System
GNET
GNET
www.gnetsystem.com
INFORMATION 1
GNET SYSTEM

GNET
PRECAUTION 2

PRECAUTION 3

GNET
GNET
GNET
GNET
Don't need to format memory card periodically. However, recommend you to format
memory card over 1times every month for maintenance
PRECAUTION 4

PRODUCT OVERVIEW 5

COMPONENT 6
Front Camera,
Inside Camera
External GPS Video out cable Wi-Fi Dongle Direct power cable
Connection cable Cigar jack
power cable
Micro SD Adapter,
Micro SD Card
INSTRUCTION
INSTRUCTION

5
Inside Cam
①Camera lense
⑤ USB port for Front Cam
NAME OF EACH PART 7

SPECIFICATION 8
Inside camera

INSTALLATION 9
1.Assemble the main body
(Front view camera) with a
bracket
Assemble them according to the
order(1 then 2) like the left picture
with uppoer position to lower part of
bracket until hear clicking sound.
5. Put the power cable in order with
the cable fix holder and connect the
power.
7. Connect a Inside view camera
Connect an inside camera with a main body through the connection cable’s
opposite side.
3. Install the device
After installing the device on the
proper position, please adjust the
right angle of the camera with
spinning the bracket. Avoid obstacles
in the front of the camera.
4. Connect the cable
Connect the cable power cable, and
the connection cable between the
front view camera and internal
camera.
8. Complete the installation
After the vehicle starts up, please
check whether LED of the device
turns on. LED turns on with the beep
sound and the record starts after 3-4
seconds.
2. Insert Memory card into the slot and remove adhesive
double-side tape
6. Install a inside view camera.
Please install a inside camera on the proper position.
Front Camera cable
Inside Camera cable

INSTALLATION 10

PRODUCT OPERATION 11

PRODUCT OPERATION 12

PRODUCT OPERATION 13

PRODUCT OPERATION 14

GNET
SAVING DATA 15

FIRMWARE UPGRADE 16

GNET
FIRMWARE UPGRADE 17

FIRMWARE UPGRADE 18