Gnet G-ON3 User manual

USER MANUAL
[G-ON3T1·G-ON3T2·G-ON3B]

CAUTION FOR SAFE USE
CAUTION FOR MEMORY CARD
PRODUCT FEATURES
PACKAGE COMPONENTS
NAME OF EACH PART
SPECIFICATION
INSTALLATION
01
02
03
04
06
08
09
··········································
······························
··············································
·······································
··············································
····························································
·····························································
01. BEFORE USE
HOW TO USE
MEMORY CARD VIDEO FOLDER
18
28
·······························································
····························
02. FUNCTION
BEFORE WI-FI CONNECTION
SMARTPHONE CONNECTION
30
31
··································
································
03. APPLICATION
SCREEN GUIDE
CONNECTION
HOW TO USE ‘withCLOUD’
35
36
47
·····························································
································································
······································
04. withCLOUD
QUESTION AND ANSWER
TROUBLE SHOOTING
WARRANTY CARD
59
77
83
········································
················································
·····················································
PC VIEWER INSTALLATION
SCREEN GUIDE
52
55
····································
··································
05. PC VIEWER
CONTENTS

IMPORTANT SAFETY
INSTRUCTIONS WARNING
01
Do not expose the unit to electrical shock or debris.
- This may cause product damage, fire, or electrical shock.
Avoid use with excessive vehicle window tints or special auto glass.
- Images may be blurry or distorted and may cause interference with the reception
rate of the GPS.
Do not modify or dismantle the device/ accessories.
- We are not responsible for any damage to the device or vehicle due to user
tampering.
Never operate the device or adjust settings while driving.
-Always keep your eyes on the road.
Do not use liquids or chemicals to clean the product or accessories.
- This may cause product damage, fire, or electrical shock.
Please use a non-scratch lens cloth to clean the product and accessories.
- Routinely clean camera lens for best results.
In the absence of the external GPS, the device's date and time may be reset.
- Please always check that the date/ time is correct.
When parked for long periods of time in direct sunlight, a temperature increase
inside the vehicle may result in a memory card corruption and/ or recognition error.
- It is recommended to remove the memory card and store it out of direct sunlight
during long periods of vehicle inactivity.
Avoid high temperature or high humidity environment for normal operation of the
product.
Check the operation of the rear camera(s) periodically before driving.
- Only the front camera will be captured in the event of a malfunction or defect.
© 2021 GNET SYSTEM CO.,LTD. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied,
in whole or in part, without the written consent of GNET SYSTEM CO.,LTD. GNET SYSTEM CO.,LTD reserves the right to change
or improve its products and to make changes in the content of this manual without obligation to notify any person or
organization of such changes or improvements. Go to www.gnetsystem.com for current updates and supplemental information
concerning the use of this product.
vGNET® and the GNET logo, are trademarks of GNET SYSTEM CO.,LTD. or its subsidiaries, registered in South Korea and other
countries. GNET G-ON™, are trademarks of GNET SYSTEM CO.,LTD. or its subsidiaries. These trademarks may not be used
without the express permission of GNET.
microSD® and the microSD logo are trademarks of SD-3C, LLC. Wi-Fi® is a registered mark of Wi-Fi Alliance Corporation.
01. BEFORE USE

02
Overtime, memory degradation can occur and should be replaced periodically.
To prevent incompatibility problems, please use only a genuine GNET memory
card. The GNET memory cards are specifically designed to operate with our GNET
systems and are covered under our warranty program.
When a vehicle accident occurred, it is recommended to remove the memory card
from the device and save the data to a computer immediately. When the memory
card is full, the data will be overwritten, and the accident data will be lost.
Please be sure to remove the memory card only after the recording LED is off.
Otherwise, if removed too early, video data could be lost or corrupted. This can
also shorten the card’s lifespan.
Please do not interchange / swap the memory cards between other products. Data
may be erased and lost if the memory card is automatically formatted.
It is recommended that the memory card be formatted at least twice a month for
product and lifespan maintenance. For best results, please use the official SD
Formatter (www.sdcard.org).
GNET System dash cameras can support memory card (SD) capacities ranging from
8GB to 1TB.
When a new or used memory card is inserted into the device for the first time, the
system will go into standby mode for 3 to 5 minutes. Please do not attempt to
remove the memory card during standby mode or when the device is formatting
the card.
It is possible to format the memory card in the GNET application for Mac and PC.
Please visit the GNET SYSTEM’s website at:
https://www.gnetsystem.com/eng →SUPPORT →DOWNLOAD
CAUTION FOR MEMORY CARD 01. BEFORE USE

03
PRODUCT FEATURES 01. BEFORE USE
SD Locks for
memory protection
Interior Camera
Wide Viewing Angle
3CH
QHD/FHD/FHD
H.265 CODEC
Real HDR SONY STARVIS
Image Sensor
G-NET
Wi-Fi APP CLOUD System LBP

04
Basic Components
Cigarette lighter and OBD power cables are each sold separately.

ⲼThe size and appearance of the components depicted above may be different from the real components.
ⲼSpecifications and components may be changed without notice for quality assurance.
ⲼWe highly recommend that a GNET Genuine Memory Card be used with all GNET products.
PACKAGE COMPONENTS
Optional Product
Hardwire Kit
External GPS
Cigarette lighter power cable
Micro SD
Memory card
Rear Camera
connection cable
Wi-Fi dongle
OBD power cable
Main Camera Rear & Interior Camera
Screw, Wrench
User Manual
Interior Camera
connection cable
Seal Cable Tamper-proof Cover
01. BEFORE USE

05
G-ON3T1 for Truck
PACKAGE C
O
MP
O
NENTS 01. BEFORE USE
G-ON3T2 for Truck
G-ON3B for Bus
Main Camera Interior & Waterproof Camera
Main Camera Waterproof Camera x 2
Main Camera Interior Camera x 2

06
NAME OF EACH PART
Front Camera





 







REC LED
Wi-Fi Connection button




Front Cam Lens
Security LED
Front Cam bracket
GPS LED



Interior Cam Connector Port
Rear Cam Connector Port
OBD2 Connector Port
External GPS Connector Port
Wi-Fi USB dongle Port


Micro SD card Slot


Power Button
Power Connector Port (DC-IN)
01. BEFORE USE

07
NAME
O
F EACH PART
Rear Camera
Interior Camera
01. BEFORE USE
Cam Lens Rear Cam Mount Rear Cam Connector Port




Status LED 
Cam Lens IR LED Bracket
Waterproof Cam Cable 
Cam Lens IR LED Status LED
  Bracket

Interior Cam Connector Port



Waterproof Camera










08
SPECIFICATION
Image Sensor
Audio input
Video Compression
Audio Compression
Resolution
Frame Rate
Recording Time(Approx.)
3G/4G/Router (Optional)
Wi-Fi (Optional)
G-Sensor
Speaker
External GPS
Angle Of View
Viewer
Power
Allowable current
of providing fuse
Operation Temperature
Humidity
Dimension
(WxHxD, mm)
SONY STARVIS
Built-in Microphone
H.265
ADPCM
Front : QHD(2560x1440)/ Rear, Interior, Waterproof : FHD(1920X1080)
All cameras : Max. 30 FPS
128GB : 11hrs 30mins/ 64GB : 5hrs 40mins
Connect to withCLOUD via 3G/ 4G/ Router telecommunication
Connect to GNET Smart phone application via Wi-fidongle
Event recording by External Shock
Operation Status alarm / Voice guidance
Synched with Google map, Keep track of location and Speed
Front : 140˚, Interior : 180˚, Rear & Waterproof : 140˚
Windows XP/7/8/10, Mac, Support 32Bit/ 64Bit,
Synchronizing Google map with PC viewer is supported for Windows7
and explorer 10 as per Google's policy.
DC 12V - 24V
3A
-20Ⳅ~ 60Ⳅ
10~95%
Front: 116x56x32, Interior:48x73x26, Rear: 44x38x28
Waterproof: 45x45x35
ⲼSpecifications and components are subject to change without notice for quality assurance.
01. BEFORE USE

1
2
Once the bracket is secure, ensure that the memory card has been inserted.
Proceed to peel the cover from the double sided tape on the bracket.
Assemble the front camera with the provided bracket in the order displayed.
Make sure bracket is hooked correctly. Push and align it until a sound is heard.
(ⴘ,ⴙ).
09
INSTALLATION
How to Install Dashcam
ⴙ
ⴘ
01. BEFORE USE

10
3
Install the front camera onto the front windshield of the vehicle making sure the
angle and location is properly aligned.
20%
ear]
[Rear][Front][Interior]
TIP: The adhesive is extremely sticky. Avoid touching the adhesive to the
windshield until the mount is properly positioned and aligned.
4
Depending on the vehicle, the front angle may be different. It is recommend to
hold a dash cam vertically based on a regular passenger car.
INSTALLATI
ON
01. BEFORE USE

5
Connect the power cable to the fuse box terminal inside the vehicle.
(The connected terminal should be one which is always supplied power even
when ACC power is turned off, such as emergency lights and/ or door racks.)
Otherwise if using a cigar power cable, plug it directly into the vehicle cigar
socket.
GNET strongly recommends having an experienced installer with the proper knowledge of electrical
systems install the device. Incorrectly wiring the power cable can result in damage to the vehicle or
the battery and can cause bodily injure.
CAUTION
6
Connect the other side of the power cable to the DC-IN labeled slot of the front
camera.
11
*3-wire power cable
Connect ACC to a fuse that does not flow when the vehicle is switched off
Connect VCC to current fuse at vehicle start-off
Connect GND to ground on the vehicle’s body
*2-wire power cable
Connect ACC and VCC to the terminal together, and change the setting from “3
wires” to “2 wires”.
INSTALLATI
ON
Rear cable [CAM1] Interior cable [CAM2]
DC-IN
01. BEFORE USE

12
8
Carefully tuck the power cable and rear camera connection cable into the linings
of the vehicle between the ceiling and glass.
* Front cam
(curved cable)
* Rear cam
(straight cable)
When the cable is bent as shown in the picture, the
data flow may be interrupted and a recording error
may occur. Please be careful.
WARNING
GPS reception and terrestrial digital sensitivity may decrease depending on the navigation installed.
When installing power cables and rear camera access cables, it is recommended that each cable be
installed on the opposite side. For example, install the power cable facing the driver's side and the
rear camera access cable facing the opposite seat.
INSTALLATI
ON
CAUTION
Attach the rear camera to the rear windshield of the vehicle and connect the
cable to the front camera.
7
* Front camera
(curved cable)
* Interior IR camera
(Right Angle cable)
Direct power cable Rear connection cable
01. BEFORE USE

Please refer to the car manual because the fuse box is differ depending on car model.
It is recommended that install the power from the automobile shop.
We are not responsible for any damage caused by self-installation.
After connecting [VCC], [ACC] on vehicle fuse, put them into the Fuse box
2
※[VCC] (Yellow line) : When the car is off, it connects with fuse that current is flowing
※[ACC] (Red line) : When the car is off, it connects with fuse that current does not flow
13
1
Find the Fuse box using electric tester from fuse box of the vehicle.
INSTALLATI
ON
How to Install Fuse Cable
01. BEFORE USE

14
Connect [GND] line to vehicle
(Do not connect the volt which is connected to dash board. Current is not flowing)
3
INSTALLATI
ON
01. BEFORE USE
4
Connect the power cable to confirm the operation of product.
And organize cables to finish installation work

Please be fully aware of the orientation of the Micro SD Memory Card.

Push the Micro SD Memory card into the memory card slot until you hear 'clack'
sound.
When using memory card for the first time or when the memory card is reused
after format, the system will be in stand-by mode for 3~5 minutes to create
system files and checking the memory card.
Recording starts with voice guidance saying "Start recording"
15
INSTALLATI
ON
Inserting the Memory Card
01. BEFORE USE

16
INSTALLATI
ON
Tamper-Proof Cover Installation
01. BEFORE USE
ⴙ
ⴘ
Insert a micro SD card in ① and
connect the power cable to ②.
then slide the SD cover into the
hole as shown.
1
Fasten a screw firmly to put
them together.
2

17
INSTALLATI
ON
Seal Cable Installation
01. BEFORE USE
Hook up the cable to the
protrusion on the body.
1
Bend and insert the end of the
cable into the hole to lock it and
adjust the length as required.
2

POWER ON
POWER OFF
EXTERNAL GPS
VOICE
RECORDING
ON/OFF
Wi-Fi USER
REGISTRATION
All LED will be turned on when the engine is on or power is on.
"Start recording" starts along with voice guidance and REC LED
is turned on. External GPS LED will be turned offif it is not
connected by external GPS
All LED will be turned offwhen press the power button or
constant cable is disconnected.
GPS LED will flicker during GPS connection.
When GPS connection is completed, GPS LED will be on.
Please check the connection again if GPS LED does not turn on
while external GPS is connected.
If you press the Wi-Fi button for 2 seconds, the voice recording
will be stopped. If press the Wi-Fi button again, the voice
recording will start.
* Caution: If you press the Wi-Fi button on dashcam over 5 seconds,
the dashcam becomes a factory default. So, please do not put it
over 5 seconds if you do not want a factory default.
If press the Wi - Fi button, the stand-by mode voice guidance
will be displayed. If there is no connection for 2 minutes,
it will be automatically discontinued. If press the Wi-Fi button
again, the voice guidance will be displayed.
*Notice : You need to set the CLOUD as “OFF” in viewer only if you
want to convert G-SYNCOULD to Wi-Fi APP after you use
GSYNCLOUD APP.
18
HOW TO USE
Product Operation
02. FUNCTION