Go groove BLUESYNC EX User manual

Your easy-to-use reference for getting the most out of your product
Enjoy
USER GUIDE
FREE REGISTRATION

Thank you for purchasing the
GOgroove™ BLUESYNC EX
Bluetooth® Expanding Speaker
Now you can take wireless music on-the-go, wherever you go! Designed with
an expanding resonance chamber, built-in rechargeable battery and optional
3.5mm connection, this compact speaker is packed with features. Expand
your wireless capabilities with the GOgroove™ BLUESYNC EX!
BLUESYNC EX Speaker USB Charging Cable
Function Switch
Charging Port
Power LED Indicator
3.5 mm Audio Cable
CHARGING
WHAT’S IN THE BOX
PRODUCT DIAGRAM
EXPANDING
Press the top of the speaker downwards and release. This will provide enhanced sound
resonance and give you access to the Function Switch and Charging Port.
Connect the BLUESYNC EX to a powered USB port using the included
USB Charging Cable. The Power LED Indicator will be red during charging and turn
o once fully charged.

MUSIC PLAYBACK
TECHNICAL SPECIFICATIONS
Speaker: 2W RMS, 4W Peak
Bluetooth Frequency Range: 80Hz – 20kHz
Bluetooth Version: 2.1 +EDR
Bluetooth Proles: A2DP
Operating Distance: 30 feet
Battery: Li-ion up to 4 hours
Power: 5v
Dimensions: 2.88 x 2.88 x 1.5 inches (70 x 70 x 37 mm)
Weight: 3.24oz (91.85 grams)
Certications: CE, FCC, BQB
PAIRING AND AUTO-CONNECT USEFUL TIPS
-Make sure that BLUESYNC EX is fully charged before use.
-Make sure that you are in the correct“AUX” or“BT”position for your audio source.
-Pairing instructions may vary by device.
-Control playback and adjust volume settings from your audio source.
1. Turn on and enter “Pairing Mode” by moving the Function Switch to the furthest
right “BT” position. The Power LED Indicator will be blue, and then begin to ash.
2. On your audio device, nd BLUESYNC EX in your bluetooth menu. Select it for
pairing. If required, use PIN: 0000. Once connected, the Power LED Indicator will
stay blue.
3. Auto-Connect can be performed with the last paired audio device. Turn on
BLUESYNC EX by moving the Function Switch to the furthest right “BT”position. It
will automatically connect to the last bluetooth device paired.
1. Bluetooth Device: Make sure the BLUE-
SYNC EX is paired to your device, and the
Function Switch is in the“BT” position.
Control the music playback and volume
from your device.
2. Non-bluetooth: Connect the 3.5mm
Audio Cable to the headphone jack of
your device. Move the Function Switch
to the “AUX”position. The Power LED
Indicator will be blue. Control the music
playback and volume from your device.

Troubleshooting
For more on the BLUESYNC EX
+ tips and tricks please visit
AccessoryPower.com/videos
© 2012 Accessory Power.
Accessory Power. All rights reserved. Accessory Power, the Accessory Power logo, and
GOgroove and the GOgroove logo, and BLUESYNC EX are registered trademarks of Bright Ideas,
Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Bright Ideas, Inc. is under license.
All trademarks and logos are property of their respective owners.
Manufactured in China. Designed in California.