GOAL ZERO Yeti 400 Lithium User manual

User Guide
Contact Us:
Toll Free: 888-794-6250
675 West. 14600 South
Bluffdale, UT 84065
www.GOALZERO.com
We proudly support Tifie Humanitarian
www.tifie.org
• Register your product
• Watch demo video
• Download user manual
Q: How do I charge my YETI?
A: You can easily charge your YETI with a
wall plug, solar panel, or from a car. Once
you have decided on a source, plug the
appropriate cables into the INPUT Port on
the front of your YETI. You will know the
Yeti is charging when the green LED light
next to the INPUT port lights up, and the
battery segments in the LCD BATTERY
DISPLAY are blinking. The YETI is fully
charged when all battery segments stop
blinking and remain solid.
Q: How should I store my YETI?
A: Having your YETI connected to a
power source at all times, like a solar
panel or a wall plug, keeps its battery
healthy and topped off. This prolongs
battery life and will ensure your YETI
is ready to recharge your gear at all times.
SOLAR GENERATOR
YETI400 Charge Times
Charging With: Approximate Charge Times
Wall charger (75W) 5 hours
Car charger (30W) 13 hours
Boulder 30 Solar Panel 20-40 hours
Nomad 27 Solar Panel 30-60 hours
Inputs
Charge Port 14-29V, up to 10A (120W)
(for solar, wall, or car charging)
Internal
Battery Type Sealed Lead-acid (AGM)
Battery Capacity 396Wh (12V, 33Ah)
Life Span Hundreds of cycles
Fuses none
Inverter 300W pure-sine wave
Technical Specifications General
Shelf Life Charge every 3 Months
Chainable Yes
Weight 29 lbs (13.2 kg)
Dimensions 10.25 x 8 x 8 in (26 x 20.3 x 20.3cm)
Warranty 6 months
Tested and Certified CE, FCC, RoHS
Operating usage temperature 32-104F (0-40 C)
Optimal storage temperature 77F (25C)
Outputs
(2)AC Outlet, 220VAC, 50Hz, pure-sine wave
300W continuous, 600W peak
12V car port
12V, up to 10A (120W)
(2)12V 6mm port
12V, up to 10A (120W)
(2)USB port
5V, up to 2.1A (10W)
Q: How do I use my YETI?
A: The output ports must be turned on
before you can recharge gear from
your YETI. Push the power button
located above each port you will be
using. You'll know the port is turned on
when the green LED light on the button
is turned on.
Q: How do I know if my YETI is charged?
A: To check the charge level of your YETI,
refer to the LCD Battery Display. When
lit up, you'll see a battery outline with 5
segments, indicating the current
charge level. You can turn on the
display by pushing one of the power
buttons. If at any time you hear your
YETI beeping, the battery is low - plug
it into a power source immediately.

WHAT IT POWERS
Powers USB, 12V and AC devices like:
CLOSE-UP OF LCD BATTERY DISPLAY
CLOSE-UP OF YETI 400 FACE PLATE
Small appliances CPAP Tablets
Televisions Smartphones Laptops
Power tools Lights …And More
Note: Recharges are based on averages of most popular devices.
12V Light
100+ Hours
Smartphone
30+ Recharges
Laptop
5 Recharges
TV
3 Hours
CHARGE
ME NOW!
Before using or storing, plug your GOAL ZEROYETI 400 into the wall until it
is fully charged. If at any point you hear beeping from yourYETI, plug it
into a power source as soon as possible.
INPUT POWER:
Indicates power flowing into
the YETI while recharging.
Will display LOW if power
flow is below a measurable
amount.
OUTPUT POWER:
Indicates amount of power
plugged-in devices are
pulling from the YETI.
SWITCH DISPLAY MODES:
Push and hold the button
until display flashes.
Continue pushing button
to scroll through options.
BATTERY FAIL: contact Goal Zero Solutions Center
BLOWN FUSE: contact Goal Zero Solutions Center
LOW BATTERY: Plug into power source immediately
TEMPERATURE WARNING; Too Hot: Unplug YETI and allow it to cool down
INVERTER FAIL: contact Goal Zero Solutions Center
BATTERY LEVEL
INDICATOR
OUTPUT
AC Port
USB Port
12V Port
12V Port
INPUT
POWER BUTTONS
Charging Port
Charging Indicator Light
LCD Battery Display
12V Power Button
USB Power Button
AC Power Button