Godox TT600 User manual

迅丽机顶闪光灯
Thinklite Camera Flash
INSTRUCTION MANUAL
说 明 手 册
中英文双语 / Chinese English Bilingual
在使用本产品之前：
请先仔细阅读本手册，以确保您能安全使用。请保存好本手册以备将来
查询参考。
Before using this product:
Please read this user manual carefully in order to ensure your safety
and the proper operation of this product. Keep for future reference.

- 19 -
Foreword
Thank you for purchasing a GODOX product.
TT600 camera ash adopts Godox wireless X system and 2.4G ratio
transmission, which is compatible with AD360II-C、AD360II-N、
TT685C、TT685N、X1T-C、X1T-N, etc. Fit all DSLR camera
brands e.g. Canon, Nikon, Sony, etc.
This TT600 camera ash features:
• GN60 (m ISO 100, @200mm). Adjust from 1/1 to 1/128 in
1/3rd stops
• Built-in 2.4G wireless transmission to support transmitting and
receiving
• High speed sync, wireless remote control, multi flash and
manual focus assist
• Stable consistency and color temperature with good even
lighting
• User-friendly LCD display & control panel

- 20 -
For Your Safety
• Always keep this product dry. Do not use in rain or in damp
conditions.
• This product contains high-voltage electronic parts. Touching
the high-voltage circuit inside it may result in electric shock. Do
not disassemble. Should repairs become necessary, this
product must be sent to an authorized maintenance center.
• Stop using this product if it breaks open due to extrusion,
falling or strong hit. Otherwise, electric shock may occur if you
touch the electronic parts inside it.
• Do not re the ash directly into the eyes (especially those of
babies) within short distances. Otherwise visual impairment
may occur. When taking pictures for babies, keep the ash unit
at least 1 meter (3.3 feet) away from them. Using bounce ash
to reduce light intensity is also recommended.
• Do not use the ash unit in the presence of ammable gases,
chemicals and other similar materials. In certain circumstances,
these materials may be sensitive to the strong light emitting
from this ash unit and re or electromagnetic interference may
result.
• Do not leave or store the ash unit in places where the ambient
temperature reads over 50°C (e.g. in automobile). Otherwise
the electronic parts may be damaged.

- 21 -
Thinklite Camera Flash
Conventions used in this Manual
● This manual is based on the assumption that both the camera and
camera ash’s power switches are powered on.
● Reference page numbers are indicated by “p.**”.
● The following alert symbols are used in this manual:
The Caution symbol gives supplemental information.
The Note symbol indicates a warning to prevent shooting problem.
Electronic Camera Flash

- 22 -
Foreword
For Your Safety
Name of Parts
Body
Control Panel
LCD Panel
What’s in the Box of TT600?
Separately Sold Accessories
Attaching to a Camera
Using the Flash
Power Management
Flash Output
ZOOM: Setting the Flash Coverage
M Mode
Multi Mode: Stroboscopic Flash
S1 Mode
S2 Mode
Hi-Speed Sync Triggering
Custom Function----Focus Assist Beam
Buzz Function
Wireless Flash Shooting: Ratio (2.4G)
Transmission
Wireless Control Function
Sync Triggering
Custom Function----Sleep Function
C.Fn Setting Custom Functions
Protection Function
Advanced Application
Technical Data
Maintenance
19
20
23
26
26
34
35
37
37
Contents

- 23 -
Name of Parts
● Body
01. Catchlight Panel
02. Built-In Wide Panel
(Retracted)
03. Flash Head
04. Optic Control Sensor
05. Focus Assist Beam
● Control Panel
11. < >Mode Selection Button/
Wireless Mode Selection
(Long Keypress)
12. < >Zoom / Function Custom
Button (Long Keypress)
13. < >Group/ Channel Setting
(Long Keypress)
14. < >Select Dial
06. Wireless Control Port
07. Sync Cord Jack
08. Hotshoe
09. Lock Ring
10. Battery Compartment
11
12
18
13
14
15
16
17
Fn
15. < > Set Button
16. ON/OFF Power Switch
17. < >Test Button / Flash
Ready Indicator
18. < >Focus Assist Beam /
High Speed Sync Button
(Long Keypress)
06
07
08
09
10
05
04
03
02
01

- 24 -
Name of Parts
● LCD Panel
19. <M>Manual Flash Mode
20. <S1>S1 Slave Flash Triggering
21. <S2>S2 Slave Flash Triggering
22. <Multi>Multi/Stroboscopic
Flash Mode
23. < >High Speed Sync
Triggering
24. < > Battery Level Indication
25. < > Sound Beep Indication
26. < >Sleep Status
27. < >Overtemperature
Indication
28. < >Wireless Signal
Transmission
29. < >Focus Assist Beam
Indicator
30. Channel
31. Group
22
23 21 242528
31
30
03
2627 2919
20

- 25 -
● What’s in the Box of TT600?
1. Flash unit 2. Mini stand 3. Protection case
4. Instruction manual
● Separately Sold Accessories
The product can be used in combination with the following
accessories sold separately, so as to achieve best photography
effects: Cells II high speed trigger, FT-16S power & trigger
control, Car charger, Mini softbox, White & Silver Reector,
Honeycomb, Color gels, Snoot, etc.

- 26 -
Using the Flash
Attach the Camera Flash.
● Slip the camera ash’s
mounting foot into the camera’s
hotshoe all the way.
Secure the Camera Flash.
● Rotate the locking screw on
the mounting foot until it locks
up.
Detach the Camera Flash.
● Rotate the locking screw
on the mounting foot until it is
loosened.
1.Power Management
Use ON/OFF Power Switch to power the ash unit on or off. Turn
off if it will not be used for an extended period of time. This ash
unit has Sleep Function and will enter into sleep status when there
is no operation for a long time. For Sleep Function setting, see the
following instruction.
2.Flash Output
● Flash output can be varied from 1/128th power to 1/1 full power
in 1/3 stop increments. To obtain a correct ash exposure, use
a hand-held ash meter to determine the required ash output.
● Adjust the power output by rotating Select Dial . The following
table makes it easier to see how the stop changes in terms off/
stop when you increase or decrease the ash output:
3. ZOOM: Setting the Flash Coverage
The ash coverage can be set to match the lens focal length from
24 mm to 200 mm. Press < > button and rotate Select Dial
<> to change the ash coverage.
Attaching to a Camera
Figures displayed when reducing ash output level
Figures displayed when increasing ash output level
When setting the ash coverage, make sure it covers the lens
focal length so that the picture will not have a dark periphery.
When “OF” is shown on the LCD display, it means no ash
output and ash ring is turned off.
1
2
3
1/1
1/1-0.3 1/1-0.7
1/2
1/2-0.3 1/2-0.7
1/4
...
OF
1/2+0.7 1/2+0.3 1/4+0.7 1/4+0.3 ...

- 27 -
Using the Flash
4. M Mode: Manual Mode
Press MODE Selection Button < > to enter M mode. In this
mode, you can set the ash unit onto your camera hot shoe or your
trigger hot shoe for ring. Before shooting, adjust the ash power
output. When the camera’s shutter is pressed, the ash will re
synchronously. Slave triggering mode is not available in M mode.
5. Multi Mode: Stroboscopic Flash
Press Mode Selection Button < > to enter Multi mode
(Stroboscopic ash). With stroboscopic ash, a rapid series of
ashes is red. It can be used to capture multiple images of a
moving subject in a single photograph. You can set the ring
frequency (number of ashes per sec. expressed as Hz), the
number of ashes, and the ash output. For setting procedures,
see the following:
Calculating the Shutter Speed
During stroboscopic ash, the shutter remains open until the ring
stops. Use the provided formula to calculate the shutter speed
required to capture the full sequence of ashes:
Number of ashes / Firing frequency = Shutter speed
For example, if the number of ashes is 10 and the ring frequency
is 5 Hz, the shutter speed should be at least 2 sec.
Note:
● Stroboscopic ash is most effective with a highly reective
subject against a dark background.
● Using a tripod and a remote switch is recommended.
● A ash output of 1/1 or 1/2 cannot be set for stroboscopic
ash.
● Stroboscopic ash can be used with “buLb”.
Press the Mode Selection
Button < > so that “Multi” is
displayed.
Press Set Button < > to
select the item to be set. The
item blinks.
Rotate Select Dial < > to
set a desired number.
1
2
3