Godrej ET-200IRHMB-M User manual

1

2
CONTENTS
1. Product Features 3
2. Precautions 3
3. OSD Operations 4
4. Troubleshooting 9
5. E-waste 10
6. Warranty Card 12

3
Product Features
1. High definition; adopt latest Megapixel CMOS Sensor; horizontal resolution
separately of 1.3 MP.
2. Day/Night mode: the sensor changes the day/night mode automatically to
show qualified colour pictures during daytime and clear pictures at night.
3. OSD menu: set technical parameters by concise words.
4. Multi-function: BLC, WDR, DNR, Real-time Image Adjustment, Mirror Image,
Sharpness.
5. AHD/CVBS shift by OSD menu.
Precautions
1. Before attempting to operate this product, please read these instructions
carefully.
2. The inner elements of the Camera are precise optic, electronic and
mechanical parts, so wrong operations, such as heavy load and strong vibration
should be avoided during transportation, safekeeping and installation. Otherwise,
the product could be damaged. And please keep power off before installation.
3. Do abide by electrical safety standards, and use self-contained specialized
power sources. The camera or video signal should be kept away from high voltage
equipment or cable during transmission. Please take actions to prevent lightning
strike and surge when necessary.
Use the recommended power. Make sure that the supply voltage and polarity
(direct-current) are correct before power on.
5. Do not use corrosive cleanser for cleaning the appearance of camera or
lens‟ senor. It‟s good for use customized lens paper or cotton buds with alcohol
drenched to clean.
6. When the machine has broken down, please do not make any repairing
operations unless you refer to instructions to detect faults first. If no reasons can
be found, please ask professionals to conduct the maintenance work. And the
professional maintenance persons should be authorized by our company.

4
OSD SETTINGS
OSD menu
SUB MENU
Lens
Manual
DC
Exposure
Shutter
AGC
Sens-up
Brightness
D-WDR
Defog
Backlight
BLC
HSBLC
White Balance
Manual
Outdoor
Indoor
AWC
ATW
AWB
Day/ night
Auto
Ext
Black and white
Colour
NR
2DNR
3DNR
Special
Camera title
D-effect
Motion
Privacy
language
Defect
RS485
Adjust
Sharpness
Monitor
LSC
Video Out
Exit
Save end,Reset,Not save

5
OSD SETTINGS
LENS-
Manual
DC
Indoor (Iris speed)
Outdoor (Min shutter,Max shutter), (Iris speed)
Iris Speed
MANUAL :The default setting is manual. If the installed lens is manual one,
please select this option.
DC : If the installed lens is manual one, please select this option. The
user can select the option by “RIGHT” or “LEFT”.
EXPOSURE-
Shutter
AUTO,FLK
AGC
Level (0-15)
Sens-up
Auto, On and Off
Brightness
Level (0-100)
D-WDR
ON (Level 0-8 )
OFF
AUTO
Defog
AUTO (Position/Size, Gradation, Default)
OFF
AGC :It increases amplifier gain in sensor. The setting value range of AGC is 15.
D-WDR : It is used to capture details in complex lighting conditions
BACKLIGHT-
BLC
ON (Level,Area,Default)
HSBLC (Area,Display,Blackmask,Level,Mode and Default)
OFF

6
Backlight compensation includes the following 3 options:
OFF :It means close the backlight compensation function. The default setting
is OFF.
ON :It means open the backlight compensation function.;
HSBLC : It means shelter from the over brightness light, such as car license plate
recognition light.
WHITE BALANCE-
Manual (Blue,Red)
Outdoor
Indoor
AWC
ATW
AWB
Its function is to control color reproduction.
DAY/NIGHT-
Auto
D-N (AGC)
D-N (Delay)
N-D (AGC)
N-D (Delay)
Ext
D-N (Delay)
N-D (Delay)
Black and white
Burst, IR Smart, IR PWM
IR smart
IR PWM
Colour
D-N AGC :It is the gain which takes place during the switching of day to night
condition and vice-versa for N-D AGC.

7
D-N DELAY: It is the time interval needed for the camera to switch from day to
night condition and vice-versa for N-D DELAY.
NOISE RATIO-
2DNR
High,middle,low,off
3DNR
High,middle,low,off
It reduces noise.
SPECIAL-
Camera title
OFF
ON
D-effect
Freeze
Mirror
Negative Image
Motion
Off
On (Area,Display,Sensitivity,Color,Trans,Alarm,Default)
Privacy
Off
On (Area,Display,Color,Trans,Default)
Language
English
Defect
Press to select the DPC(Defective Pixel Correction)level of
defect.please do not use this function without cover the
lens.
RS485
Cam iD
ID display
Baud rate
This option can be used for adding effects to the camera such as privacy masking,
motion detection, negative image, mirror image.

8
ADJUST-
Sharpness
Auto (Level,Start AGC,End AGC),Off
Monitor
LCD (Gamma,Blue gain,Red gain)
CRT (Black level,Blue gain,Red gain)
LSC
On,OFF
Video Out
PAL/NTSC
This option is used to sharpen the image.
It also contains LCD and CRT option.
Need to adjust gamma, blue gain, red gain as per monitor characteristics for
proper image reproduction.
EXIT-
Save end, Reset, Not save
It is used to save the settings.
It‟s use to restore factory defaults. If parameter settings are disorder, please
choose “CAMERA RESET”, and then press “ENTER”.

9
TROUBLESHOOTING
Item
Problems
Remedies
1
No picture or unstable
Check the connection of video line or power
line
2
The image is so blurred
Checking is there something dirt on the lens,
then use customized lens paper or cotton
buds with alcohol drenched to clean.
check the focus length and OSD settings
3
The image is so dim
Adjust the CNT of monitor and iris.
4
No motion detection
frame and privacy shaded
frame
Check the option is ON or OFF. Or check the
menu parameters
5
Screen color cast in the
special environment
Adjust WEB mode or direction
6
The screen glittering
The camera might face to the sun, TV set or
computer.
7
Functions are disorder and
could not adjust
Restore default settings
8
The camera works
abnormal; the surface
over-heat; has peculiar
smell, smoke etc.
Please cut off the power supply
immediately. Secondly, check the
connection of power supply. Then send the
camera to professionals for maintenance.

10
INFORMATION ON E-WASTE HANDLING AND MANAGEMENT
Dear Customer,
The Ministry of Environment and Forests have published The Ewaste (Management
and Handling ) Rules 2010 which comes in effect from 1st May 2012.
E-waste is defined as any electrical or electronic component of products in whole
or in part, or rejects from their manufacturing or repair process which are
intended to be discarded.
These rules apply to every producer, consumer or bulk consumer involved in the
manufacture, sale, purchase and processing of electrical and electronic equipment
or components as specified in Schedule 1 (please refer to our website
www.godrej.com in the „Good & Green‟ section of CSR module for more details).
Under these rules, specific roles and responsibilities are defined for producers ,
consumers and recyclers handling and managing ewaste.
E-waste is to be managed in an environmentally sound manner which means,
taking steps to ensure that health and environment are protected from adverse
effects of hazardous substance contained in such wastes.
Rule 6 of the Ewaste (Management and Handling) Rules 2010 states that bulk
consumers of electrical and electronic equipment shall be responsible for recycling
of the e-waste generated by them. Bulk consumer means bulk users of electronic
and electrical equipment such as Central Government or State Government
Departments, public sector undertakings, banks, educational institutions,
multinational organizations, international agencies, private companies that are
registered under the Factories act 1948 and Companies act 1956. The bulk
consumers have to ensure that the e-waste generated by them is channelized to
authorized collection centers or is taken back by the producers. They shall
maintain records of ewaste generated by them in Form 2 and make such records
available for scrutiny by the State pollution control or the Pollution control
Committee concerned.
All consumers of electrical and electronic equipment irrespective of their status as
bulk consumers or not , shall ensure that ewaste generated by them is channelized
to authorized collection center(s) or registered dismantler(s), or recycler(s) or is
returned to the pick-up/take back services provided by the producers. (Please

11
refer to our website www.godrej.com in the „Good & Green‟ section of CSR
module for more details).
All our products intended to be recycled under the category of ewaste (as defined
above) carry a label or stamp of the WEEE symbol (A wheelie bin with a cross) ,
which states that it falls under the hazardous waste category and is not to be
disposed along with normal garbage.
We seek your support in ensuring environmentally sound management of ewaste
and aid us in sustaining our earth‟s natural resources and maintaining the earth‟s
green cover intact for the benefit of our future generations.

12
WARRANTY CARD
This manual suits for next models
1
Table of contents
Other Godrej Security Camera manuals