Godrej EVE mini User manual

Quick Start Guide
easy viewing everywhere
Wifi Network Camera

About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons.
Legal Disclaimer
Regarding the product with internet access, the use of product shall be wholly at
your own risks. Our company shall not take any responsibilites for abnormal
operation, privacy leakage or other damages resulting from cyber attack, hacker
attack, virus inspection, or other internet security risks; however, our company will
provide timely technical support if required. Surveillance laws vary by jurisdiction.
Please check all relevant laws in your jurisdiction before using this product in
order to ensure that your use conforms to the applicable law. You futher agree that
this product is only for civil use, and godrej shall not be liable in the event that this
product is used with illegitimate purposes, such as third-party rights infringement,
medical treatment, safety equipment or other situations where the product failure
could lead to death or personal injury, or weapon of mass destruction, chemincal
and biological weapon, nuclear explosion, and any unsafe nuclear energy uses or
anti-humanity usages. You should undertake all responsibilities for losses or
damages resulting from the above usages whatsoever. In the event of any
conflicts between the above and the applicable law, the later prevails.
The purpose of the Products is to provide an adequate warning in the event of
illegal encroachment in certain area; however, the proper installation of the
Products will not eliminate, but only reduce, that accidents will not occur or that
there will be no personal injury or property loss as a result. You are highly
recommended to raise your vigilance and strengthen the safety awareness in the
daily life.
GODREJ does not undertake any liability for personal injury or property damage,
as the result of product interruption or service termination cause by:
a) improper installation or usage other than as requested;
b) the protection of national or public interests;
c) Force Majeure;
d) yourself or the third party, including not limitation, using any third party’s
products, software, applications, and among others.

Regulatory Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This product generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this product does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Directive
2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more
information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentation for specific
battery information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information
see: www.recyclethis.info.

1
Contents
Quick Start Guide (x1)
Wi fiNetwork
Camera (x1) Screw Kit (x1) Metal plate (x1)
Foam Sticker (x1) Power Adaptor (x1)
HD 1 MP 720P/ 2 MP 1080 Live Video
Godrej EVE Cloud
Wi-Fi Connection
Motion Detection: Send instant alert to mobile
device if motion detection is triggered.
Functions
115° Horizontal Field of View
Auto Light Supplement
The icons in this manual are for reference only and may
dier from the actual product.
Certain functions of this product (including but not limited to live
view, recording, and remote playback) depend upon the Internet
connection. To learn more about these functions, visit the
Godrej EVE website www.eve.godrejsecure.com and register for
a new account.

2
Overview
Name Description
RESET Button Press and hold the RESET button for 3 seconds while
the camera is running. The camera will restart and
reset to default settings.
microSD Slot Recommended compatibility: Class 10, maximum
space 64GB. If a SD card is used, video files will be
stored in the SD card. You would need to initialize it in
the Godrej EVE app.
USB Port
IR Light
LED
Indicator
Auto light source for night vision. The video mode has
two functions: color (for daylight recording) and black
and white with IR illuminator (for night recording).
Flashing red and blue: The camera is on; you can
configure the Wi-Fi connection.
Steady blue: The camera is connected.
Slow blue flicker: The camera is running properly.
Steady red: The camera is starting up.
Slow red flicker: The Wi-Fi connection has failed.
Fast red flicker: MicroSD card error.
5V±10%
Lens
Microphone
IR Light
LED Indicator
Power Cable
RESET
microSD Card Slot
Magnetic Base
To connect to a dierent Wi-Fi network, press the RESET button
for 3 seconds to restart the camera then reconnect to Wi-Fi
when the red and blue light flashes.

3
Operations
Step 2
Starting the Camera
Connect the camera to the power adapter. When the red and blue light
flashes, that means the camera is powered on.
Power Socket
Power Cable
(1.5m)
Step 1 (Optional)
To open the MicroSD card slot cover, flip it clockwise.
Insert a microSD card into the slot.
1
2
Installing the microSD Card

4
Step 3
Godrej EVE Cloud Setup
1
2
To Register an Godrej EVE Account
To Add a Camera
- Connect your mobile device to Wi-Fi.
- Download and install the Godrej EVE app from App
Store or Playstore.
- Launch the app and register for an Godrej EVE user
account.
- Log into the Godrej EVE app.
- Click the “+” on the upper-right hand corner to add
a camera.
OR
Model: XXXXXX
Power Consumption: XXX
FCC ID:XXXXXXX IC:XXXXXX
SN: XXXXXXX MM/YYYY
Verification Code: XXXXXX
- Scan the QR Code on the back of the camera or on the
Quick Start Guide cover.
- Follow the prompts to set up the Wi-Fi. (Place the camera
within 3 meters from the router when setting up the Wi-Fi.)
- Configure the time settings and complete the process.

5
3
4
To Change the Default Password
To Initialize the microSD Card
After adding the camera, you are required to change the
device password to ensure your video security.
- Locate the verification code as your default password on
the label at the back of the camera.
Model: XXXXXX
Power Consumption: XXX
FCC ID:XXXXXXX IC:XXXXXX
SN: XXXXXXX MM/YYYY
Verification Code: XXXXXX Model: XXXXXX
Power Consumption: XXX
FCC ID:XXXXXXX IC:XXXXXX
SN: XXXXXXX MM/YYYY
Verification Code: ABCDEF
- Go in the Device Settings interface in the app and tap on
the Change Password.
- Enter the verification code as the old password, and type a
new password.
- Check the microSD card status by tapping on the Storage
Status in the Device Settings interface.
- If the microSD card status displays as Uninitialized, tap to
initialize it. The status will then change to Normal. You can
then start recording any event triggered video in the
camera such as motion detection.

Installation
1
Troubleshooting
Installing the Metal Plate (Optional)
3Completing Installation
Pick a clean and flat surface and secure the metal plate to the
desired position with the foam stickers or screws (not
included.)
There’s a magnet piece inside the camera. You can skip this
step if the surface is made of metal.
Secure the camera magnetically to the metal plate or metal
surface (see figure below).
Adjust the camera angle as required.
2Installing the Camera
Q:
A:
“The device is oine.” or “The device is not registered.”
prompts appear when adding the camera using the Godrej
EVE app.
1. Make sure the network is connected properly and the
router’s DHCP is enabled.
2. Press and hold the RESET button for 3 seconds to reset the
settings anytime you have changed the network settings.
Q:
A:
Does the camera run on batteries or other USB-powered
devices?
Best used with the included standard power adapter to
provide a stable voltage supply.
Q:
A:
The mobile device is not receiving instant alerts when the
camera is online.
1. Make sure the Godrej EVE app is running on your mobile
device.
2. For Android devices, make sure the app is running in the
background; and for iOS devices, enable the push
notifications in “Settings > Notification”.
6

Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
Safety Instructions
These instructions are intended to ensure that a user can use the product
correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are
neglected.
Warnings
•Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
• In the use of the product, you must be in strict compliance with the electrical
safety regulations of the nation and region. Please refer to technical
specifications for detailed information.
• Do not connect several devices to one power adapter as adapter overload
may cause over-heating or a fire hazard.
• Please make sure that the plug is firmly connected to the power socket. When
the product is mounted on wall or ceiling, the device shall be firmly fixed.
• If smoke, odor, or noise rise from the device, turn o the power at once and
unplug the power cable, and contact the service center.
Warnings: Follow these safeguards to prevent
serious injury or death.
Cautions: Follow these precautions to prevent
potential injury or material damage.

Cautions
Make sure the power supply voltage is correct before using the camera.
•Do not drop the camera or subject it to physical shock.
• Do not touch sensor modules with fingers. If cleaning is necessary, use a
clean cloth with a bit of ethanol and wipe it gently. If the camera will not be
used for an extended period, replace the lens cap to protect the sensor from
dirt.
•Do not aim the camera at the sun or extra bright places. Blooming or
smearing may occur (which is not a malfunction), and aect the sensor’s
endurance at the same time.
•The sensor may be burned out by a laser beam, so when any laser equipment
is in use, make sure that the surface of sensor will not be exposed to the laser
beam.
• Do not place the camera in extremely hot, cold (the operating temperature
shall be -10°C to +40°C), dusty, or damp locations, and do not expose it to
high electromagnetic radiation.
•To avoid heat accumulation, ensure that there is good ventilation to the
device.
• Keep the camera away from liquids.
• While in delivery, pack the camera in its original, or equivalent, packing,
packing materials. Or packing of the same texture.
• Regular part replacement: a few parts (e.g. electrolytic capacitor) of the
equipment shall be replaced regularly according to their average endurance.
The average time varies because of dierences between operating
environments and usage history, so regular checking is recommended for all
users. Please contact your dealer for more details.
• Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries
according to the instructions provided by the battery manufacturer.
•If the product does not work properly, please contact your dealer or the
nearest service center. Never attempt to disassemble the camera yourself. (We
shall not assume any responsibility for problems caused by unauthorized
repair or maintenance.)