gofanco PRO-12GSDI4P User manual

PRO-12GSDI4P
1x4 12G/6G/3G/HD/SD-SDI Distribuon Amplier
with Reclocking
®
Made in Taiwan
User‘s Guide

®
PRO-12GSDI4P
Congratulaons for owning a gofanco product. Our products
aim to meet all your connecvity needs wherever you go.
Have fun with our products!
Please read this manual carefully before rst use.
If you need more informaon about our products, please visit
www.gofanco.com.
For technical support, please email us at
[e-mail].
For drivers/manuals download, please go to
hp://www.gofanco.com/download.

®
PRO-12GSDI4P
• 12G/6G/3G/HD/SD-SDI distribution
• Four independently buered and reclocked outputs*
• Cable equalization and signal retiming
• LED indication of signal lock and video rate
• Pass ancillary data and embedded audio
• Provides automatic input cable equalization (Belden 1694A)
up to 180m (594ft)@3G, 100m (330ft)@6G and 70m(230ft) @12G
• Reclocking SDI signals for cascading and thus longer
transmission
• Inter-locked power supply for better xedness
2. Features
1. Introduction
3
The PRO-12GSDI4P 1x4 12G/6G/3G/HD/SD-SDI Distribution
Amplier with Reclocking receives one SDI input, perfectly du-
plicates it, and re-transmits four SDI outputs for real time mul-
ti-viewing. It is a reliable video device splitting an SDI, HD-SDI,
3G-SDI, 6G-SDI, or 12G-SDI video source to four SDI compliant
displays at the same time.
• 1x PRO-12GSDI4P
• 1x 5V power adapter
• 1x BNC 75 ohm terminator
• 1x User Manual
3. Package Contents
Due to the super high frequency and lower jier requirement for 12G
SDI signals, to have the best performance, it is strongly recommended
to use one 75 ohm terminator if the paired SDI in not in use.
Please see the following table for 12G SDI output pairing.
*
Output Port
Pair A Output 1 & 2
Pair B Output 3 & 4
Table #1

®
PRO-12GSDI4P
4. Specications
Item Description
SDI standard SD/HD/3G/6G/12G-SDI
Multi-Rate Support Auto detection of SD, HD, 3G, 6G or 12G Signals
SDI Compliance SMPTE 424M, SMPTE 292M, SMPTE 344M, SMPTE 259M,
DVB-ASI, ST-2081(6G), ST2082(12G)
SDI Data rates 1.485 / 2.97 / 5.94 / 11.88 Gbps
Video bandwidth [11.88Gpbs & 11.88/1.001Gbps]
Output impedance 75
Reclocking Yes
Cable equalization [12G] up to 70m (230ft)
[6G] up to 100m (330ft)
[3G] up to 180m (594ft)
Audio support Yes
RP-198 pathological
patterns Immune
PCB stack-up 4-layer board [impedance control — dierential 100 ; single 75 ]
Input 1x BNC [SDI]
Output 4x BNC [SDI]
BNC connector 75 inter-locked socket
Eye pattern
characteristics[12G]
Amplitude: Within 800mV (<10%)
Rise/Fall time: Less than 35ps
Timing jitter: <1.0 UI
(10Hz to 1188MHz)
Alignment jitter: <0.3
(100KHz to 1188MHz)
Mechanical
Housing Metal enclosure
Dimensions
[L x D x H]
Model 92 x 42 x 28 mm [3.6" x 1.7" x 1.1"]
Package 198 x 137 x 74mm [7.8" x 5.4" x 2.9"]
Carton 420 x 400 x 300mm [1'4"x 1'3" x 11.8"]
Weight Model 119g [4.2 oz]
Package 346g [0.7 lbs]
Fixedness Inter-locked power supply
Power supply 5V 1A DC
Power consumption 3 Watts [max]
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
4
The measurement results are from Phabrix QX with SDI through 1m (3.3) long Belden 1694A.
*

®
PRO-12GSDI4P
5. Connection Diagram
6. Hardware Installation
5
PRO-12GSDI4P
1. Connect an SDI camera or other SDI devices to the
PRO-12GSDI4P’s SDI input.
2. Connect SDI sink devices (e.g. monitors or video processors)
to the PRO-12GSDI4P’s outputs.
3. Plug the power adapter into a reliable power outlet.

®
PRO-12GSDI4P
7. Panel Description
1. 12G/6G/3G/HD/SD-SDI output
2. Micro-USB for F/W update
3. 5V DC power jack
4. 12G/6G/3G/HD/SD-SDI input
5. Power LED indicator
6. 12G Signal LED indicator
7. 6G Signal LED indicator
8. 3G Signal LED indicator
9. HD Signal LED indicator
10. SD Signal LED indicator
11. 12G/6G/3G/HD/SD-SDI output
6
Front Panel Rear Panel
234
11
18
5
6
7
9
10

®
PRO-12GSDI4P
7
11. Limited Warranty
The SELLER warrants the PRO-12GSDI4P 1x4 12G/6G/3G/HD/SD-SDI Distributi-
on Amplier with Reclocking to be free from defects in the material and workm-
anship for 1 year from the date of purchase from the SELLER or an authorized de-
aler. Should this product fail to be in good working order within 1 year warranty
period, The SELLER, at its option, repair or replace the unit, provided that the unit
has not been subjected to accident, disaster, abuse or any unauthorized modi-
cations including static discharge and power surge. This warranty is oered by
the SELLER for its BUYER with direct transaction only. This warranty is void if the
warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the
current price of parts and labor in eect at the time of repair. Such repairs are
warranted for 90 days from the day of reshipment to the BUYER. If the unit is
delivered by mail, customers agree to insure the unit or assume the risk of loss
or damage in transit. Under no circumstances will a unit be accepted without a
return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including wi-
thout limitations, any other implied warranty or tness or merchantability for any
particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside
Taiwan are responsible for shipping charges to and from the SELLER. Cables are
limited to a 30 day warranty and cable must be free from any markings, scratches,
and neatly coiled.
The content of this manual has been carefully checked and is believed to be ac-
curate. However, The SELLER assumes no responsibility for any inaccuracies that
may be contained in this manual. The SELLER will NOT be liable for direct, indi-
rect, incidental, special, or consequential damages resulting from any defect or
omission in this manual, even if advised of the possibility of such damages. Also,
the technical information contained herein regarding the PRO-12GSDI4P features
and specications is subject to change without further notice.
The product name and brand name may be registered trademarks of related manufacturers. TM and ®
may be omied on the user‘s guide. The pictures on the user‘s guide are just for reference, and there
may be some slight dierences with the actual products.
We reserve the rights to make changes without prior noce to a product or system described herein to
improve reliability, funcon, or design.
Disclaimer

Thank you for choosing gofanco
®
www.gofanco.com
Dec, 2018 Ver. A Copyright © 2018 by gofanco, LLC. All rights reserved.