GoMax Electronics SP-0002 User manual

SP-0002
1x2 Component/Composite Distribution
Amplifier
User Manual
Made in Taiwan
1
Safety and Notice
The SP-0002 1x2 YPbPr/Composite Distribution Amplifier has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all electronic
equipments, the SP-0002 should be used with care. Please read and follow the safety instructions to protect
yourself from possible injury and to minimize the risk of damage to the unit.
zFollow all instructions and warnings marked on this unit.
zDo not attempt to service this unit yourself, except where explained in this manual.
zProvide proper ventilation and air circulation and do not use near water.
zKeep away the objects that might damage the device and assure that the placement of this unit is on a
stable surface.
zUse only the power adaptor, power cords and connection cables designed for this unit.
zDo not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.

2
The SP-0002 is designed to work as a duplicator and an amplifier at the same time for component or
composite video applications. The SP-0002 not only takes one video input from a typical component source
and immediately directs it to two component monitors or projectors, but also boosts and extends the signal up
to 65m (210ft) without noticeable signal loss or picture degradation. In addition, for composite applications,
users can further utilize the extra two video channels to duplicate stereo audio and make SP-0002 as an A/V
distribution amplifier. SP-0002 makes users easily split your YPbPr signal source such as PS3, XBOX, XBOX360,
or Wii to two YPbPr displays.
Features
zNo software required
zTransmission distance up to 65m (210ft)
zVideo bandwidth up to 400MHz
zAlso works as a composite splitter with stereo audio
zDaisy-chain multiple units together for even more outputs
Introduction
3
Specifications & Package Contents
Model Name SP-9002 SP-0002
Technical
Output Ports 2
Supported input/output VGA
/
Component/S-video/Composite*Component/S-video/Composite*
Video bandwidth 400MHz
Video support
1080p60, WUXGA [1920x1200@60]
& UXGA [1600x1200@60] or even
higher
Up to 720p@60Hz,1080i@60Hz,
1080p@30Hz
Transmission HDCP
–
65m [210ft]
/
U
XGA
–
65m [210ft]
Input 1x VGA 3xRCA
Output 2x VGA 6xRCA
Audio support No
N
o for Component / Yes for
Composite
RCA connector Component Video or Composite + Stereo
VGA connector HD-15 [15-pin D-sub female]
Mechanical
Case Metal
Dimensions
[L x W x H]
Model 110 x 40 x 30 mm
[4.3” x 1.6” x 1.2”]
160 x 100 x 40 mm
[6.3” x 3.0” x 1.6”]
Package 330 x 200 x 95 mm
[1’1”x 7.9” x 3.7”]
270 x 175 x 100 mm
[10.6” x 6.9” x 3.9”]
Carton 495 x 440 x 380 mm
[1’7.5”x1’5.3”x1’3”]
510 x 365 x 290mm
[1’8”x1’2”x11.4”]
Weight Model [TX/RX]-155g [5.5 oz] 390g [13.8 oz]
Package 1200g [2.5 lbs] 1200g [2.6 lbs]
Fixedness Wall-mounting case with screws
Power supply 5V 2
A
DC
Power consumption 5 Watts [max]
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
Package Contents
1x SP-9002 or 1x SP-0002
1x 5V power adapter
1x User Manual
1~3x VGA-to-Component breakout cable [optional accessory]
*Component and composite input/output can be done by using the optional accessory VGA-to-Component adapter
to connect to the VGA socket. However, for S-Video input/output, please find a VGA-to-S-video adapter available in
the market to fulfill you need.

4
1. +5V power input: Connect to the +5V power adaptor
2. Output: Component/S-video/Composite Outputs
3. Input: Component/S-video/Composite Input
1. Connect a component [YPbPr] source to the YPbPr input of the SP-0002.
2. Connect two YPbPr monitors or projectors to the YPbPr.
3. Plug power adapter cable into 5V DC power jack.
Hardware Installation
Panel Descriptions
1 2 3
5
The SELLER warrants the SP-0002 1x2 YPbPr/Composite Distribution Amplifier to be free from defects in
the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer.
Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option,
repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any
unauthorized modifications including static discharge and power surges.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and
labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the
BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage
in transit. Under no circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any
other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly
disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for
shipping charges to and from the SELLER. Cables are limited to a 30 day warranty and cable must be free from
any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However, The
SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The SELLER will
NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or
omission in this manual, even if advised of the possibility of such damages. Also, the technical information
contained herein regarding the SP-0002 features and specifications is subject to change without further notice.
L
imited Warranty