Goodmans GSPKBAT01SLT User manual

USER MANUAL
PORTABLE SPEAKER AND POWERBANK
MODEL:GSPKBAT01SLT

GSPKBAT01SLT
Welcome1
4
6Important battery information
7
Your Sound Board2
Operation3
3.1 Turning ON/OFF
3.2 Charging the Sound Board
3 3 Soundflow
3.4. Aux Input
3.5 mm auxiliary input jack
3.5. Charging your device
3.6. Power button
Power on/off the unit
.
..
..
Technical Specifications
Troubleshooting
2 1 In The Box
2 2 Side View
.
.
5
8 Customer Support
Performance statement
8

1 Welcome
Your Sound Board2
•Sound board
•USB charging cable
•Quick Start Guide
•Guarantee Booklet
21.
•Aux in cable
Side View22.
A
B
C
D
E
F
AB C D EF
Battery level indicator
DC 5V Input
DC power input jack
USB Output
Connect to your device
for charging
Aux Input
3.5 mm auxiliary input jack
-Volume +
Adjust volume
Power button
Power on/off the unit
Thank you for choosing this Goodmans product We ve been
making electronics for the British people for 70 years Each of
our projects has been carefully designed to be great at what
it does and this one is no exception We hope you enjoy your
sound board
.'
.
.
In The Box
Carefully remove your sound board from the box.
Inside the box you will find:
GSPKBAT01SLT

Operation
3
Turning On/Off
3.1
32.Charging the sound broad
Power On Press the button The button will stay lit
Power Off Press the button again The button will no longer be lit
:, .
:. .
The sound board can be powered by USB or by its built in battery To power
the sound board using the built in battery for portable use follow the
steps below
-,
-,
:
1 Connect the supplied micro USB cable to the DC 5V Input jack on the side of
the sound board.Connect the other end of the cable to a USB power source
(like a computer or a USB charger).
.
2. The battery level indicator on the side of the sound board starts blinking
when it is charging.The battery capacity is indicated by the four LEDs of
the battery level indicator:100%,75%,and 25%. When the sound board is
fully charged, the four LEDs will stay lit.
3. Disconnect the micro USB cable from the sound board.
•When the battery level is low, the 25% LED of the battery level indicator
on the side of the sound board will blink. Please plug in DC 5V power to
recharge.
3.3 Soundflow
Playback with Soundflow
1. Place your smartphone with audio playing on the top of the sound board.
Start with your phone volume around 50%. You can experiment with
different phone volume levels until you find the right setting for
your phone.
Line up your phone’s speaker with the highlighted lower
bar of the soundboard. You may need to move your phone around to find
the optimal placement.
•
•
2. The sound board amplifies your audio automatically.
3. Press - Volume + to adjust volume.
4. For controling audio playback, please use the controls on
your smartphone directly.
Soundflow works with any smartphone or music player with an external
speaker. No wires or cables are required.
•
GSPKBAT01SLT

3.4 Auxiliary source
1. Plug one end of the supplied audio cable into the Aux Input jack and the other end
into the output of your music player.
2. Press “Play” on your music player to scream music directly via the sound board.
3. For controlling audio playback please use the controls on your music player
directly. For adjusting volume you can use both the controls on your music player
and the volume buttons on the sound board.
4. Disconnect the audio cable from the Aux Input jack to activate Soundflow playback
again.
3.5 Charging your device
•
•
•
•
Use the USB Output jack on the side of the sound board to charge your tablet, cell
phone or other mobile device.
1. Connect your device with the USB cable provided with it to the USB Output jack
on the side of the sound board
.
2. Press the button to turn on the sound board. The battery level indicator will
blink while your device is connected and charging.
3. When your device is fully charged, the battery indicator will stop blinking.
4. Press the button to turn off the sound board. Disconnect your device from the
sound board.
Charging function may not be supported for all phones, tablets or electronic devices.
Use the appropriate USB cable provided with your cell phone or tablet for charging.
The sound board and your device can be charged at the same time. In addition,
you can playback with Soundflow when the sound board and your device are
charging.
GSPKBAT01SLT

Problem What to do
Troubleshooting4
Soundboard audio goes on and off
(intermittent sound)
Soundboard audio is distorted
Soundboard audio isn’t working
If you’re listening to music with wide dynamic
range-lots of quiet and loud parts, like
classical music, for example-you might
need to turn up your phone so that the
Soundboard can detect the quiet parts better.
If your phone’s case covers its speaker, the
Soundboard might have trouble “finding” the
sound from your phone. Try your phone
without the case.
Try turning your phone down. The sound
from your phone may be too loud for the
Soundboard to amplify correctly.
Make sure the Soundboard is on. The
button on the side of the Soundboard should
be illuminated. If it isn’t, press the button
to turn the Soundboard on, Please note that
the Soundboard automatically turns off after
3 minutes of silence.
If you’re using the Soundboard’s built-in
battery, make sure it’s charged.
Make sure your phone is playing music at
around 50% volume. Test its speaker to make
sure you can hear something from it.
Try turning your phone up, Its sound may be
too quiet for the Soundboard to detect.
You might need to test your phone in different
positions on the Soundboard. See the
“finding your phone’s ‘sweet spot’” section
earlier in this guide.
If your phone’s case covers its speaker, the
Soundboard might have trouble “finding” the
sound from your phone. Try your phone
without the case.
Make sure the Soundboard is on. The
button on the side of the Soundboard should
be illuminated. If it isn’t, press the button
to turn the Soundboard on, Please note that
the Soundboard automatically turns off after
3 minutes of silence.
If you’re using the Soundboard’s built-in
battery, make sure it’s charged.
Make sure your phone is playing music at
around 50% volume. Test its speaker to make
sure you can hear something from it.
Try turning your phone up, Its sound may be
too quiet for the Soundboard to detect.
You might need to test your phone in different
positions on the Soundboard. See the
“finding your phone’s ‘sweet spot’” section
earlier in this guide.
If your phone’s case covers its speaker, the
Soundboard might have trouble “finding” the
sound from your phone. Try your phone
without the case.
The Soundboard is not as loud as it
should be.
If your phone’s case covers its speaker, the
Soundboard might have trouble”finding”the
sound from your phone, Try your phone
without the case.
GSPKBAT01SLT

GSPKBAT01SLT
Micro USB
Technical Specification5
www.goodmans.co.uk
5000 +/-200mAh
6 Important battery information.
Warning:Your product contains a battery and charging system which is
designed to work in temperatures that do not exceed 50 122 Leaving
this product in a closed automobile or the trunk of an automobile where
temperatures may exceed 50 may result in permanent battery damage, fire,
or explosion.Please remove your product from the automobile when you exit,
do not place your product in the trunk of your automobile, and do not leave
your product in any location where temperatures may exceed 50 .
℃( ℉).
℃
℃
Model Number
Power Supply
Speaker Output Power
DC In
Battery capacity
Dimensions
2W
5V 1A
190mm(W)x90mm(D)x30mm(H)
Our customer service team is available for technical or guarantee support.
Visit www.goodmans.co.uk/support.
8 Customer Support.
GSPKBAT01SLT
Under the environment with electrostatic discharge and radio interference field,
the sample may malfunction and need user reset to recover sometimes.
7 Performance Statement.