Pyle PLSPOOL14 User manual

Portable Wireless Speaker
with Colorful Lights
PLSPOOL14
Floating Pool Speaker
IP68 Waterproof Speaker (Black)

2 www.SereneLife.com
PLSPOOL14 Portable Wireless Speaker
with Colorful Lights is IP68 Waterproof
Rating, Shockproof, Dustproof, Scratchproof
Speaker. It can be widely used for biking,
hiking, camping, party, indoors, etc. With
colorful light show, it also has ambient light
that will really makes your night life more
colorful and wonderful.
1. INSTRUCTION TO PARAMETERS
Charging port
Light modes
volume down (Press and hold)
/previous track (Short press)
volume up (Press and hold)
/next track (Short press)

3www.SereneLife.com
7”
3.3 ”
3.3 ”
3.3 ”

4 www.SereneLife.com
It takes about 3 minutes to pair for the first
time. After the pairing is successful, it will
automatically pair in the future, which only
takes 8 seconds.
After power on, if without any pairing, it will
enter the sleep state after 20 minutes, and
then shut down after another 40 minutes.

5www.SereneLife.com
2. BUTTON FUNCTION DESCRIPTION
A. Multifuncflon Button:
1. Press and hold for 3 seconds to power ON,
and press and hold again for 3 seconds to
power OFF.
2. When in playing music, short press this
button to pause music, press again to
continue playing music.
3. When incoming call, press the button to
answer the phone, and double press the
button to refuse the call.
4. Double tap to dial the last incoming call
number.
B. “ ” Button:
Short press the button to play the previous
track, press and hold the button to reduce
the volume.
C. “ ” Button:
Short press the button to play the next track,
press and hold the button to increase the
volume.

6 www.SereneLife.com
D. Light mode Button:
I. Short press to switch the different LED
modes.
1. Slow flashing when there is no music:
red, green, blue, yellow turns brighter
every 20 seconds.
When there is music: the LED lights flashes
with the music.
2. Keep red light
3. keep green light
4. keep Blue light
5. RGB light color change automatically
(slow and fast flashing are mixed)
6. RGB light color automatically switches
slowly
7. RGB light color automatically switches
quickly
8. The light power off.
II. Press and hold the light button for 8
seconds to restore factory settings
3. WIRELESS BT PAIRING SETTINGS
Press and hold the multifunction button
for 3 seconds to power ON. Wait the blue
light flash, open the BT mode on your

7www.SereneLife.com
smartphone and select “PYLE” to pair the
device. It's now paired. You can broadcast
your music! If not, start again or relaunch
the PYLE.
4. CHARGING
Please take the charging cable included to
charge the speaker. During the charging,
the Led Indicator will keep red. After fully
charged, the LED indicator is Blue.
Note: Use the included cable and respect
the voltage!
WHAT'S IN THE BOX
• Wireless Speaker with Colorful Lights
• USB Charging Cable
TECHNICAL SPECS:
• Power: 6W
• Construction Material: PC
• Frequency Response: 2400MHz-2480MHz
• Battery Life: Up to 30,000+ Hours
• PA Speaker Battery Type:
3.7V Li-ion - 2500mAh
• Working Hours: 5-7 Hours
• Product Dimension: 3.3'' x 3.3'' x 7'' -inches

Questions? Comments?
We are here to help!
Phone: [phone]
Email: suppor[email protected]