GoVideo DV2140 Instruction Manual

Start Here
Unpack Your DV2140
• DVD+VCR
• Remote control
• 1.5V AAA batteries (2)
• RF (Radio Frequency) Antenna cable
• RCA cable for Audio/Video connections
• User’s guide
• Read Me First/Quick Reference Guide
• Warranty registration card
Insert Batteries
1 Remove battery cover.
2 Insert two 1.5V AAA batteries, paying
attention to the correct polarities (+/–).
3 Replace cover.
• CD-ROM, CD+G, and CD-i discs cannot be
played on this DVD player.
Q uestions?
O ur A w ard-W inning C usto mer
Service P rofessionals are
Ready to H elp!
O r C heck O ur
Website!
www.govideo.com
Call Us!
1-800-736-7679
E -M ail U s!
[e-mail]
DO N O T RE TUR N TH IS
PR O DUC T TO TH E STO R E !
Thank
You!
For Fast, Friendly
Service
For a P rompt R eply
For the Latest FA Q s
STOP
DVD+VCR
Television
RCA Audio/Video
Cable
RF Antenna
Cable
:: Basic Connections
To get started, you will need to connect the DVD+VCR to your TV. The DVD+VCR
clock will be set automatically.
1 Connect Antenna to DVD+VCR Connect an indoor/outdoor antenna or
wall outlet antenna cable to the ANT. IN jack on the rear panel.
2 Connect DVD+VCR to TV Choose one of the following methods:
a. RF Connection Using the supplied RF antenna cable, connect the RF OUT
jack on the back panel of the DVD+VCR to your TV’s Antenna Input.
b. Line Connection Using the supplied RCA-type audio/video cable (red,
white, yellow), connect the DVD/VCR OUT jacks on the back panel of your
DVD+VCR to your TV's Audio/Video In jacks. If your TV is equipped with RCA
jacks, it is better to use the Line Connection method.
3 Plug In Plug the DVD+VCR power cable into a standard 120V/60Hz wall
outlet.
4 Turn On Your DVD+VCR Press the POWER button on the remote control
or front panel of the unit.
5 Turn On Your TV Press the POWER button on your TV.
6 Set the TV to Channel 3 or Line The factory default is channel 3. See
the User's Guide to change the RF Output to channel 4. If you are using the Line
Connection method, set your TV to its Line or Video input.
• You must use either the Standard RF or Line connection between your TV
and DVD+VCR, even if you plan to use the S-Video or Component Video
Output for improved DVD picture quality.
• The S-Video and Component Video Outputs are for DVD playback only!
• See the User's Guide for advanced connections.
Antenna/Cable TV
A/V IN
ANT IN
POWER
DV2140
AV2 IN
CH
PAUSEPLAYREW STOPFF DVD/VCR VIDEO COPY REC
DVD EJECT VCR EJECT L - AUDIO - R

POWER
DV2140
AV2 IN
CH
PAUSEPLAYREW STOPFF DVD/VCR VIDEO COPY REC
DVD EJECT VCR EJECT L - AUDIO - R
POWER
DV2140
AV2 IN
CH
PAUSEPLAYREW STOPFF DVD/VCR VIDEO COPY REC
DVD EJECT VCR EJECT L - AUDIO - R
PLAY
PLAY
DVD EJECT DVD EJECT
To Play a VHS Tape
1 Insert a VHS tape into the VCR deck. The DVD+VCR will power on automatically when you insert the tape.
2 Press PLAY to begin playback.
To Play a DVD or CD
1 Press EJECT on the remote control or DVD EJECT on the front panel to open the disc drawer. The DVD+VCR will power on
automatically when you open the disc drawer.
2 Place the disc in the drawer with the label side facing up. If the disc has two sides, place the disc with the desired side facing up.
3 Press EJECT or DVD EJECT again to close the disc drawer.
4 Press PLAY to begin playback. Many discs will begin playback automatically when the disc drawer closes.
• If the DVD has a disc menu, or more than one title, the disc menu may appear.
If so, press / and / to highlight menu items, then press ENTER to make
selections.
©2003 GoVideo. All rights reserved.
:: Basic Controls
Two Decks, One Set of Controls!
:: Basic Disc Playback
:: Basic VCR Playback
• If the tape is missing the record safety tab and Auto Play is turned
on, the tape will begin playing automatically.
VCR Button – Press to control the
VCR deck. All deck control keys
and red labeled buttons will operate
the VCR.
DVD Button – Press to control
the DVD deck. All deck control
keys and blue labeled buttons
will operate the DVD player.