Playing a DVD or CD
Note: This unit is not compatible with MP3 CDs.
1. Insert a DVD or CD into the slot-load disc drive, with the label side of the
facing the rear of the television. Once a DVD or CD is loaded into the
television, the TV will automatically switch to DVD mode.
2. Press the Play/Pause button on the remote or TV to begin playing the
loaded disc.
DVD Setup Menu
In DVD mode, press the DVD Setup button to access the DVD setup menu.
Press the DVD Setup button to exit the DVD setup menu.
•
D
I
S
C
B
A
C
K
•
D
I
S
C
B
A
C
K
•
D
I
S
C
B
A
C
K
Connecting Cable/TV Antenna
You will need: a Cable/Antenna wire (not included).
1. Connect the Cable/Antenna wire to the input on the television.
2. Press the Source button to switch to TV mode.
3. Press the Setup button to access the setup menu.
4. Press the Arrow () buttons to highlight the Channel icon,
and press the Enter button.
5. Press the Arrow () buttons to highlight Air/Cable, and press the Arrow
() buttons to select AIR or Cable.
6. Press the Arrow () buttons to highlight Auto Scan, and press the Enter
button to begin scanning for available channels.
Note: Initial channel scanning process may take up to 15 min.
Connecting a Media Player/Streaming/Gaming Device
If the Device has an HDMI Output:
• Connect the HDMI output on the Device to the HDMI INPUT on the television
using an HDMI cable (not included).
If the Device has a Composite Video Output:
• Connect the video output on the Device to the COMPOSITE VIDEO INPUT on
the television using an A/V RCA cable (not included).
• Connect the audio output on the Device to the RCA AUDIO INPUT on
the television.
If the Device has a Component Video Output:
• Connect the video output on the Device to the COMPONENT VIDEO INPUT
(YPbPr) on the television using a component cable (not included).
• Connect the audio output on the Device to the RCA AUDIO INPUT on the
television using a stereo audio cable.
After Connecting Your Device:
• Press the Source button to switch to HDMI 1, 2, 3, or AV/YPbPr.
