Graco 2M13 - Digital Imonitor Mini Baby Monitor User manual

©2008 Graco ISPM026AA 04/08
*PARENT UNIT FINDER: Press button to locate parent unit when it is misplaced or hidden.
**CHANNEL: Pressing button changes channels to help find the best signal. See owners manual for more information.
imonitor™ mini MODEL# 2M13
1 Connect AC Adapter to nursery
Unit.
2 Place unit in room. 3 Press the ON/OFF buttons to
activate or deactivate.
4 Parent/nursery units will locate
each other.
ch pf
ch pf
ch pf
Parent Unit
VOLUME
SOUND
LIGHTS
SPEAKER
VIBRATION CHARGER
PORT
ARM BELT NECK
3 different battery doors
for carrying unit
vibe
ON/OFF
Nursery Unit
MICROPHONE
NIGHT LIGHT
BUTTON
Docking Station
ON/OFF
SPEAKER/LIGHTS
*PARENT UNIT
FINDER
**CHANNEL
ch pf
1 Remove battery door.
R
2 Plug battery in. Make sure to
push the connector tight.
3 Replace battery door.
Parent Unit
GSP523040
600mAh 3.7V
GSP523040
600mAh 3.7V
GSP523040
600mAh 3.7V
2 Place parent unit in dock to
charge battery.
1 Connect AC adapter to the back
of the docking station.
3 Charge battery for 5 hours
before use.
Docking Station
The dock light will illuminate
while unit charges. Light will
turn off when fully charged.
Charge battery for
5 hours before use.
Dock Light
Nursey Unit
Quick Start Product Instruction Manual

Appareil pour adulte
VOLUME
SIGNAL SONORE
ET LUMINEUX
HAUT-PARLEUR
VIBRATION
imonitor™ mini MODÈLE# 2M13
BRAS CEINTURE COU
vibe
MARCHE
/ARRÊT
Appareil de chambre d’enfant
MICROPHONE
BOUTON DE
VEILLEUSE
Socle de synchronisation
MARCHE/ARRÊT
VOYANTS DE
HAUT-PARLEUR
*DISPOSITIF DE
REPÉRAGE DE
L’APPAREIL
POUR ADULTE
**CANAL
ch pf
1 Retirer le couvercle du
compartiment à piles.
R
2 Raccorder la pile. S’assurer de
bien insérer la prise. 3 Remettre le couvercle du compartiment à pile en place.
Appareil pour adulte
GSP523040
600mAh 3.7V
GSP523040
600mAh 3.7V
GSP523040
600mAh 3.7V
2 Placer l’appareil pour adulte sur
le chargeur pour recharger la pile.
1 Brancher l’adaptateur de courant
alternatif à la base (placer l’appareil
sur la base) à l’arrière du socle de
synchronisation
3 Charger les piles pendant 5 heures
avant utilisation.
Socle de synchronisation
Le témoin lumineux de la base
indique lorsque l’appareil est en
cours de chargement. Il s'éteint
lorsque la pile est entièrement
chargée.
Charger les piles pendant
5 heures avant
utilisation.
Témoin
lumineux
de la base
PRISE DE
CHARGEUR
*DISPOSITIF DE REPÉRAGE DE L’APPAREIL POUR ADULTE: appuyer sur le bouton pour localiser l’appareil pour adulte lorsqu’il est égaré.
**CANAL: appuyer sur le bouton pour changer de canal et trouver le meilleur signal. Voir le manuel pour de plus amples informations.
1 Raccorder l’adaptateur de courant
alternatif à l’appareil de chambre et
brancher au mur.
2 Placer l’appareil dans la
chambre avec le bébé.
3 Appuyer sur le bouton MARCHE
/ARRÊT pour mettre l’appareil
en marche.
Appareil de chambre d’enfant
4 L’appareil pour adulte et l’appareil
de chambre d’enfant vont alors se
localiser.
ch pf
ch pf
ch pf
3 différents couvercles de
compartiment à pile pour
le module portable.
Quick Start Manuel de directives de production

Unidad para padres
VOLUMEN
LUCES DEL
SONIDO
PARLANTE
PUERTO
DEL CARGADOR
VIBRACIÓN
imonitor™ mini MODELO# 2M13
BRAZO CINTURÓN CUELLO
vibe
ENCENDIDO
/APAGADO
Unidad del dormitorio
MICRÓFONO
BOTÓN DE LA
LUZ NOCTURNA
Estación de conexión
ENCENDIDO
/APAGADO
LUCES DEL PARLANTE
*BUSCADOR DE
LA UNIDAD
PARA PADRES
**CANAL
ch pf
1 Saque la puerta de la pila.
R
2. Ponga la pila. Asegúrese de
empujar apretadamente el conector. 3 Vuelva a colocar la puerta de
las pilas.
Unidad para padres
GSP523040
600mAh 3.7V
GSP523040
600mAh 3.7V
GSP523040
600mAh 3.7V
2 Ponga la unidad para padres
en la estación de conexión para
cargar la pila.
1 Conecte el adaptador de corriente
alternada a la parte trasera de la
estación de conexión.
3 Cargue la pila durante 5 horas
antes del uso.
Estación de conexión
La luz de la estación se iluminará
mientras la unidad se carga. La
luz se apagará cuando esté
completamente cargada.
Cargue la pila durante 5
horas antes del uso.
Luz de la
estación
*BUSCADOR DE LA UNIDAD PARA PADRES: Oprima el botón para ubicar la unidad para padres cuando esté oculta o perdida.
**CANAL: Oprimir el botón cambia los canales para ayudar a encontrar la mejor señal. Para más información, consulte el manual del propietario.
1 Conecte el adaptador de corriente
alternada a la unidad del dormitorio
y enchúfelo en la pared.
2 Ponga la unidad en la sala
donde está el bebé.
3 Oprima el botón de ENCENDIDO
/APAGADO para activarla.
Unidad del dormitorio
4 Las unidades del dormitorio y
para padres se comunicarán.
ch pf
ch pf
ch pf
3 puertas diferentes para
las pilas en la unidad
de transporte.
Quick Start Manual de instrucciones para la producción

imonitor™mini
www.gracobaby.com
©2008 Graco ISPM027BA 3/08
Owner’s Manual
Keep Instructions For Future Reference

2
Failure to follow these warnings and the assembly instructions could
result in serious injury or death.
This device is designed only to monitor the sounds of your child.
It will not alert you to your child’s silent activities. When using the
monitor, you must still provide the supervision necessary for the
continued safety of your child. This product is not designed or
intended for use as a medical monitor. Always be sure that both
the transmitter and receiver are working properly and are within
range of each other.

3
• STRANGULATION HAZARD.
Keep the AC adapter cords out
of the reach of children. Do not
use with extension cords.
• DO NOT place the Nursery
Units or their cords within your
child’s reach. Do not put the
Nursery Units inside a crib or
playard.
• Use ONLY with 110-120 volt
AC electrical outlets.
• Protect the AC adapter cords.
Place them so they are not
walked on or pinched by
furniture or other items.
• Allow for proper ventilation
when units are in use. Do not
cover the Nursery Units or
Parent Units with any object
such as a blanket. Do not place
them in a drawer or in any
location which would muffle
the sound or interfere with the
normal flow of air.
• DO NOT immerse any part of
the Nursery Units, Parent Units,
or Docking Stations in water.
Clean only with a dry cloth.
• DO NOT place the Units near
water and moisture. Do not use
the Units outdoors. Do not use
the Units near possible wet
areas, such as a bathtub,
shower, wash basin, sink,
laundry tub, swimming pool,
wet basement, etc.

4
• Keep Units away from heat
sources, such as fireplaces,
radiators, stoves, and TVs or
other appliances. Heat can
damage the case or electrical
parts.
• DO NOT use the Units if:
• The AC adapter cords or plugs
have been damaged.
• The units have been exposed
to liquids.
• The units have been dropped
or are damaged.
• DO NOT OPEN THE NURSERY
UNITS, PARENT UNITS,
DOCKING STATIONS OR
ADAPTERS. No user-serviceable
parts inside. Risk of electrical
shock, fire or death.
• The antenna used for this
transmitter must be installed to
provide a separation distance
of at least 20 cm (7.9”) from all
persons and must not be
co-located or operating in
conjunction with any other
antenna or transmitter.

5
FCC STATEMENT
WARNING Modifications not
authorized by the manufacturer
may void users authority to
operate this device.
NOTE: This equipment has been
tested and found to comply
with the limits for a Class B
digital device, pursuant to Part
15 of the FCC Rules. These limits
are designed to provide
reasonable protection against
harmful interference in a
residential installation. This
equipment generates, uses and
can radiate radio frequency
energy and, if not installed and
used in accordance with the
instructions, may cause harmful
interference to radio
communications.
However, there is no guarantee
that interference will not occur
in a particular installation. If this
equipment does cause
harmful interference to radio or
television reception, which can
be determined by turning the
equipment off and on, the
user is encouraged to try to
correct the interference by one
or more of the following
measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation
between the equipment and
receiver.

6
• Connect the equipment into
an outlet on a circuit different
from that to which the receiver
is connected.
• Consult the dealer or an
experienced radio/TV technician
for help.
This device complies with part
15 of the FCC Rules. Operation
is subject to the following two
conditions: (1) This device may
not cause harmful interference,
and (2) this device must
accept any interference
received, including interference
that may cause undesired
operation.

7
Parent Unit Overview
vibe
VOLUME
ON/OFF
VIBRATION
SOUND
LIGHTS
SPEAKER
CHARGER PORT
VIBE
LINK
SPEAKER/LIGHTS

8
Nursery Unit Overview
MICROPHONE
NIGHT LIGHT
BUTTON
ON/OFF
PARENT UNIT
FINDER
CHANNEL
ch pf

9
ARM BELT NECK
Battery Door Options
Select one of 3 battery doors according to your preference in
carrying the parent unit. You can carry the parent unit around your
arm, belt, or neck. All 3 choices can be used on the parent unit.
1

10
Remove battery door.
GSP523040
600mAh 3.7V
2
Replace battery door with
one of the 2 other door
selections.
GSP523040
600mAh 3.7V
3

11
Remove battery door.
Plug battery in. Make sure to
push the connector tight.
4
5
Installing Battery

12
Re-attach battery door.
Battery installation is
complete.
GSP523040
600mAh 3.7V
6
7

13
Connect AC adapter to the
back of the docking station.
8
9
Docking Station

14
Charge battery for 5 hours before use.
To use while charging, press the power
button to activate unit. Make sure unit
charges for 5 hours before removing
from docking station.
Volume is amplified while in docking
station. Adjust volume by pressing
+ or -.
11
10 Place parent unit in the dock to charge
battery.
The dock light will illuminate while unit
charges. Light will turn off when fully
charged.
vibe
VOLUME
VIBRATION
SOUND
LIGHTS
MICROPHONE
CHARGER PORT

15
Activating Vibration
12
vibe
vibe
Press “Vibe” button briey to
activate vibration feature. To
turn off vibration, press
button again.
“Vibe” Icon will appear when
vibration is on.

16
To adjust vibration
To adjust the level at which the vibration alert is activated, press
and hold the “Vibe” button on the side of the parent unit. The
sound lights will illuminate to show the vibration alert adjustment
setting. Press the volume UP/DOWN switch to change the setting.
A lower sound light setting will make the vibration activate for
quieter sounds. A higher sound light setting will make the vibration
activate for louder sounds. When the sound in the nursery goes
above the sound light level you choose, the vibration alert will be
activated.
vibe
vibe
13 NOTE: Vibration will
automatically shut off when
parent unit is in dock.

17
Sound lights will automatically dim in
dark room.
15
Auto Dimming Sound Lights
Volume
Press + or - buttons to change
the volume level.
14