Graco True Focus 2V01 User manual

True Focus
OWNER’S MANUAL
©2013 Graco PD252552A 6/13 US
Model 2V01
Keep Instructions For Future Reference

2
Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
This device is designed to aid in the monitoring of
your child. When using the monitor, you must still
provide the supervision necessary for the continued
safety of your child. This product is not designed or
intended for use as a medical monitor. Always be sure
that both the transmitter and receiver are working
properly and are within range of each other.
. Keep the adapter
cords out of the reach of children. Do not use with
extension cords.
 place the Nursery Unit or its cord within
your child’s reach. Do not put the Nursery Unit inside a
crib or playard.

 Place them so they are
not walked on or pinched by furniture or other items.
Allow for proper ventilation when units are in use.
Do not cover the Nursery Unit or Parent Units with any
object such as a blanket. Do not place it in a drawer or in


 immerse any part of the Nursery Unit or
Parent Units in water. Clean only with a dry cloth.

Warnings to Parents and Other Users

3
 place unit near water and moisture. Do not
use the Nursery Unit outdoors. Do not use the Nursery
Unit near possible wet areas, such as a bathtub, shower,
wash basin, sink, laundry tub, swimming pool, wet
basement, etc.
Keep Nursery Unit away from heat sources, such as

Heat can damage the case or electrical parts.





 No user-serviceable parts


to provide a separation distance of at least 20 cm (7.9”)
from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter.


authorized by the manufacturer may void users authority
to operate this device.

comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.

4

protection against harmful interference in a residential


accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not

cause harmful interference to radio or television reception,

on, the user is encouraged to try to correct the interference



receiver.

different from that to which the receiver is connected.

technician for help.

with RSS-210 of Industry Canada. Operation is subject to



including interference that may cause undesired operation.

approved by the party responsible for compliance can


and inside the battery compartment on the Parent Unit.

5
Parts List
Adult assembly required.
Tool required: Phillips screwdriver
Nursery Unit
(PD252384)
(2) AC Adapter
Parent Unit
(PD252347)
(1) Parent Unit
Battery

6
Parent Unit
DC Adapter
Jack
Belt Clip
Battery Compartment

Volume Up/Down
PowerZoom Out
Zoom
In
Menu
Navigation
buttons
Signal Strength
Indicator
Battery Status
Indicator

7


into the Parent Unit before
the unit will be ready for
use.
Use a Phillips head
screwdriver to remove the
battery door.
NOTE: Screw should be
loosened but stay attached to
battery door.
Remove the battery pack
from the packaging and plug
into the back of the unit.
Place the battery pack into
the recess and press the wire
into the slot on the side.
Press down on battery door
and push door open.

3


8
Replace the battery door and
tighten the screw.


AC adapters, plug the connector on the cord into the

plug adapter into a standard wall outlet.


under any circumstances.
If units do not work, check that AC adapters are
plugged into working outlets.

4
5

9
Nursery Unit
DC Adapter
Jack
Battery Compartment
Power
Camera

10

Remove and discard static
cling labels.
6

Use a Phillips head
screwdriver to remove the
battery door.
NOTE: Screw should be
loosened but stay attached
to battery door.
7

11
Replace the battery door
and tighten the screw.
9
Insert 
batteries.
Make sure they are
inserted correctly.

a power outage. Only audio (no video) is operational
when running on battery power.

8



120 volt AC household current.

connector on the cord into the DC
adapter jack on the back of the

into a standard wall outlet.


any circumstances.

plugged into working outlets.


batteries in audio mode only.


12

13

Parent Unit will lock on to the
Nursery Unit.
A second later, the connection
light 
monitor is now ready for use.





baby. Plug an AC adapter into the jack on the back of the
Nursery Unit. Plug it into a working 120 volt AC outlet.


Place the Parent Unit within five
(5) feet (1.5 meters) of the
Nursery Unit and turn on the
Parent Unit using the On/Off

screen. Press and hold the
button for 1 second to turn on.
Depress the power button on
the Nursery Unit for 1 sec. to
turn camera on.


14
Testing the System

set up, and at regular times thereafter
if you suspect they may have been damaged or have not
been used for a long time.
1. If two adults are present, have one take the Parent
Units to different locations, trying various volume
settings, while the other speaks into the Nursery Unit.
2. If only one adult is available, place a ticking clock,
radio, or other sound-producing device near the Nursery
Unit to test it.

mind, and adjust the volume accordingly.
4. If there is sound interference, try moving the Nursery
Unit to a different location.

Unit is detected, the
icon displays on the
screen of the Parent Unit.

change.

after 3 seconds.


1515
Depress the power button
on the Nursery Unit for
1 sec. to turn camera on.

swivel the Nursery Unit
in the desired direction.
15
Nursery Unit Power On/Off




Make sure Nursery Unit

video feed will then be
shown.

turn green.
16
Parent Unit Power On/Off
 Press and hold ON/OFF
button for 1 second (to
power on).


17
Press and hold ON/OFF
button for 3 seconds to
turn unit off.
 If the Nursery Unit is
not turned on the Parent
Unit will display
prompt and beep twice
every 10 seconds until
Nursery Unit is turned
on.


18

different choices, press up ,
down, left or right.
After choosing one of the

OK” button to make the
selection.
NOTE: Once you make a selection (MENU), the unit
will automatically advance you to the next option/screen
or return you to the live video feed (if applicable).

change status, press the





19


appears on the screen to
indicate the current zoom
level.
2x

 Press button to
Zoom In on baby.
Zooms in on the center of
the video feed one level.

and 2x.
2x
 Press button to
Zoom Out on baby.
Zooms out on the center
of the video feed one
level.

and 2x.


by pressing the up, down,
left and right buttons to
esure you are
concentrated on the
correct screen of your
liking.
NOTE: Pan will not
work in zoom out or
regular viewing mode.

20






 Decreases the

Increases the


NOTE:
video image due to the camera lens being optimized for
night vision.
