GRANADA FT-51124 User manual

Assembly Instruction
Item#: FT-51124
Product Name: 26’’Steel fire pit
WARNINGS:
This fire bowl is intended for outdoor use only. Do not use on wooden decks.
This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or other
combustible materials in the fire bowl.
Not for use by children. Keep children and pets away from the fire bowl.
The fire bowl is hot. Use with caution. Do not touch the hot fire bowl with bare hands.
Never leave the burning fire bowl unattended, and always extinguish the fire completely
before leaving the fire bowl.
Do not use near flammable or combustible objects or materials.
When the fire bowl is in use, the handle on the mesh screen can reach extreme
temperatures that can cause serious injury to an unprotected hand. Use a poker or an
appropriate heat resistant glove or pad when handling.
Check local fire regulations and municipal by-laws for safe use.
Some parts may contain sharp edges—especially as noted in the manual. Wear
protective gloves if necessary.

FIRE PIT PARTS LIST
No. PARTS Qty
A Handle 1
B Mesh wire cover 1
C Decorative ring 4
D Fire bowl 1
E Legs 4
F Poker 1
HARDWARE LIST
No. Hardware Qty
AA M6 x10 mm Bolt 8
BB M6 Nut 5
Step By Step Assembly Instructions:
Step1: Insert handle (A) into hole in Mesh wire cover (B) and tighten it with M6 Nut (BB)
underside to secure
A
BB
B
A
E
F
C
D
B

Step 2: Attach the legs (E) to the fire bowl (D) by using M6 x 10 mm bolts (AA), then tighten the
bolts.
Step 3: Insert the decorative rings (C) into the holes along side of the fire bowl (F) by using M6
Nuts (BB).
BB
C
F
E
AA
D

Step 4: Put the mesh wire cover (B) on the fire bowl (D) and place the poker (F) near the fire pit
for use anytime.
B
F