Grand PATIO FP-088 User manual

Assembly Instructions
Square Metal Fire pit FP-088
Please check the carton and packing materials before disposing to
make sure that you have all the parts for this product
Part List
Part List Description Qty. Drawings
① Mesh Lid 1
② Iron Grate 1
③ Poker 1
⑤ Frame Support Part 4
⑥ Leg 4
⑦ Top Frame 4
Fire Bowl 1
A Bolt 36
B Nut 1
C Lid Ring 1
D Allen Wrench 1
Tool required: Allen Wrench (provided)
Special Warnings
 Check local bylaws before using the fire pit.
 This fire pit is intended for Outdoor Use Only! DO NOT use on wooden decks.
 This fire pit is intended to Burn Wood Logs Only! DO NOT burn coal, leaves or
other combustible materials in the fire pit.
 NOT for use by children. Keep children and pets away from the fire pit.
 Fire pit is hot, use with caution. NEVER touch hot fire pit with bare hands.
 NEVER leave burning fire pit unattended and always extinguish fire completely
before leaving the fire pit.
 Maintain a minimum of 5 FT from any structure!
 DO NOT use near flammable or combustible objects or materials.
 Only CHROMED PLATED COOKING GRID(Not provided) is intended for
cooking.LOG GRATE is NOT intended for cooking and SHOULD NOT be used
for this purpose.
Operation Instructions
 Place logs on grate and light with match. DO NOT overload logs.
 Please use Poker (provided) when handling.
 We do not recommend pouring water over the fire unless necessary. The fire
should be allowed to expire on its own.
Care and Maintenance
This fire pit is a quality-built product and is made to last for many years.
The frame structure of this unit is made of powder-coated steel extrusion and
should resist rusting under normal use. Should rusting occur, we suggest using a
steel brush on the affected area followed by a spray coating of high temperature
anti-rust paint.
For additional rust proofing of the bowl, grate and mesh lid we recommend that a
coat of high temperature primer (such as rustoleum or similar brand) is applied
before use.
You may cover the fire pit with a Protective Cover (Not provided) when the fire pit
is not in use. Ensure the fire pit has completely cooled down before using the
Protective Cover.

Assembly Instructions
Estimated Assembly Time: 20 Minutes
DO NOT over tighten hardware!
Step 1: Place parts on a smooth even surface, Fix 4 pieces Top Frame (⑦) by using Bolt
(A) into Square frame. （View Fig.1）
Step 2: Attach Frame Support Parts (⑤) to Legs (⑥) by using Bolts (A), Hand tighten!
(View Fig.2).
.
Step 3: Attach Legs (⑥) to Top Frame (⑦) with Bolts (A). Tighten all hardware
accordingly with an Allen Wrench (D) (provided) and adjustable wrench until all pieces fit
together securely. Turn the assembled fire pit frame over so that it sits securely (legs
down) on a flat surface. (View Fig. 3)
Step 4: Place Fire Bowl (⑨) in the center of Top Frame (⑦) and put Grate (②) in the
Fire bowl (⑨).Mount Lid Ring (C) on the Mesh Lid (①) by Bolt (B), then place the
assembled Mesh Lid over the Fire bowl (⑨) (View Fig. 4)
Your FIRE PIT is ready for use!