Grandstream Networks GUV3060 User manual

Pairing Procedure
GUV3060
21 3
Headset Components
LED Indicator
GUV3060 Charging Box
USB cable Quick User Guide
Package contents
Microphone
Touch Point
LED Indicator USB Port
Opening the top cover of the charging box
will trigger the automatic pairing mode
with both indicator lights flashing.
Note: The pairing takes about 10s and the
sound “connected” indicates its success.
Start pairing
Enable “Bluetooth” function on the phone, search for “GUV3060”, click to connect
and wait for the sound “connected’ indicating its success.
During this process, both indicator lights will turn off first and then the blue indicator
light would turn to slow flashing.
Note: The earbuds would shut down for power saving when not connected to the
Bluetooth device for 5 minutes.
Charging the Charging Box
Connect the Charging Box to a powered USB
port using the USB Type-C cable.
Note: It takes about 2 hours to fully charge the
charging box and the earbuds.
Charging the Earbuds
Wireless Charging
Charging Indicator Status
Place the earbuds inside the Charging Box.
The magnet parts inside would adjust the
earbuds to a fit condition.
Note: It takes about 2 hours to fully charge
the earbuds.
Enter Pairing Mode
Start Pairing
Earbuds
Item Status Indicator
Charging
Charging
Fully-charged
Low Battery
Level
Red indicator light on
Green indicator light on
Blue indicator light flashing
every 5 seconds
Fully-charged Blue indicator light off
Blue indicator light on
Charging
Box
Place the charging box on the center of the
wireless charger (not provided) as shown
in the illustration.
Note: It takes about 4 hours to fully charge
the earbuds and the charging box.
2 Extra Small Earplugs
2 Extra Large Earplugs
True Wireless Earbuds

654
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215 USA
Voice: [phone]
Fax: [phone]
www.grandstream.com
For Certification, Warranty and RMA information, please visit
www.grandstream.com
FCC ID: YZZGUV3060
How to use the Earbuds
Single Tap
FUNCTION ACTION
Double Tap
Press 2s
Press 12s
Pause media / Play media
Answer call / hang up call / previous Track
Answer call / hang up call / next Track
Reject Call / switch between ANC on/APT on/ANC
off
Factory reset
When connected to the phone,Press 4 times to
enter the gaming mode and another 4 times to exit.
Certification information
Double Tap
Triple Tap
Activate voice assistant
Quadruple
Tap
Common part:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Canada Regulatory Information
This device complies with Innovation, Science, and Economic
Development Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2)this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Innovation, Sciences et
Développement économique Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
EU Regulatory Information
Support Frequency Bands and Power:
The simplified EU declaration of conformity referred to in Article 10(9)
shall be provided as follows:
Hereby, [Grandstream Networks, Inc.] declares that the radio
equipment type [GUV3060] is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.grandstream.com
The device is compliance with RF exposure guidelines, users
can obtain Canadian information on RF exposure and
compliance.
Le présent appa reil est conforme aux directives d’exposition
RF, les utilisateurs peuvent acquérir les informations
correspondantes sur l’exposition aux radiofréquences et sur
la conformité de l’appareil.
Left/Right Ear
Left Ear
Right Ear
Left/Right Ear
Left/Right Ear
Left/Right Ear
Left/Right Ear
the equipment.
BT/BLE 2402-2480 MHz<1dBm
IC: 11964A-GUV3060