Grandstream Networks GXV3651_FHD User manual

GXV3651_FHDUser Manual
Firmware Version 1.0.1.71
www.grandstream.com
http://esupport.grandstream.com
Grandstream Networks, Inc.
GXV3651_FHD

GXV3651_FHDUser Manual
Firmware Version 1.0.1.71
www.grandstream.com
http://esupport.grandstream.com
TABLE OF C ONTENTS
GXV3651_FHD User Manual
WELCOME ................................................................................................................................................ 4
SAFETY COMPLIANCES
.............................................................................................................................. 5
W ARRANTY ............................................................................................................................................... 7
PACKAGE CONTENTS
............................................................................................................................ 8
EQUIPMENT PACKAGE CONTENTS
.............................................................................................................. 8
PRODUCT OVERVIEW ............................................................................................................................. 9
GXV3651_FHD SIDE V IEW ....................................................................................................................... 9
GXV3651_FHD BACK P ANEL .................................................................................................................. 10
GXV3651_FHD SAMPLE CONNECTION DIAGRAM ..................................................................................... 11
GXV3651_FHD KEY F EATURES .............................................................................................................. 12
GXV3651_FHD LENS SPECIFICATION ..................................................................................................... 13
INSTALLATION GUIDE ...........................................................................................................................14
CONNECT YOUR
GXV3651_FHD............................................................................................................. 14
CONFIGURING THE
GXV3651_FHD VIA WEB B ROWSER ............................................................................ 15
GXV3651_FHD HOME WEB PAGE .......................................................................................................... 18
GXV3651_FHD CONFIGURATION & LANGUAGE P AGE ............................................................................... 19
BASIC SETTINGS
EXPLANATION .........................................................................................................20
SYSTEM SETTINGS P AGE ......................................................................................................................... 20
VIDEO & AUDIO SETTING PAGE
................................................................................................................ 21
CMOSSETTINGS PAGE
.......................................................................................................................... 23
WI-FI SETTINGS
P AGE ............................................................................................................................. 24
NETWORKING SETTING
P AGE ................................................................................................................... 25
DDNSSETTINGS PAGE
........................................................................................................................... 26
SIPSETTING PAGE ................................................................................................................................. 27
STATUS
P AGE ......................................................................................................................................... 29
ADVANCED SETTINGS
EXPLANATION ................................................................................................30
USER MANAGEMENT PAGE
...................................................................................................................... 30
MAINTENANCE PAGE
............................................................................................................................... 31
SMTP SETTING PAGE (EMAIL
A LARM ) ...................................................................................................... 32
FTPSETTINGS PAGE (UPLOAD A LARM ).................................................................................................... 33
PTZSETTINGS PAGE
.............................................................................................................................. 34
CONNECT A PTZDEVICE TO THE
GXV3651_FHD ..................................................................................... 35
ALARM SERVER SETTINGS PAGE (UPLOAD ALARM TO SUPPORTED VMS OR HTTPSERVER) .......................
36
ALARM EVENT
P AGE ................................................................................................................................ 37
CONNECT ALARM INPUT EQUIPMENT TO THE
GXV3651_FHD .................................................................... 38
SETUP ALARM A CTIONS ........................................................................................................................... 38
SETUP ALARM EVENT TIME SCHEDULE
..................................................................................................... 39
HOW TO CONNECT AN ALARM OUTPUT EQUIPMENT TO
GXV3651_FHD...................................................... 40
MOTION DETECTION CONFIGURATION PAGE (SET
A LARM ).......................................................................... 41
SYSLOG SETTINGS PAGE
(T ROUBLESHOOTING )......................................................................................... 43
LIVE STORAGE SETTING PAGE (SDCARD FILE
M ANAGEMENT )................................................................... 44
SOFTWARE UPGRADE...........................................................................................................................45
SOFTWARE UPGRADE VIA TTFP, HTTPOR HTTPS
.................................................................................. 45
INSTRUCTIONS FOR LOCAL FIRMWARE UPGRADE USING TFTPSERVER:
....................................................... 46
CONFIGURATION FILE DOWNLOAD
............................................................................................................ 46
RESTORE FACTORY DEFAULT SETTING
............................................................................................47
FACTORY
RESET................................................................................................................................ 47
RESET BUTTON (HARD RESET) ................................................................................................................ 47
RESET FROM WEB INTERFACE (SOFT
R ESET )............................................................................................ 47
IP VIDEO SURVEILLANCE
FAQ .............................................................................................................48

Grandstream Networks, Inc.
GXV3651_FHD User Manual
Firmware Version 1.0.1.71
Page 3 of 51
Last Updated: 3/2013
TABLE OF
F IGURES
GXV3651_FHDUSER M ANUAL
FIGURE 1 SIDE VIEW
........................................................................................................................................................... 9
FIGURE 2 BACK PANEL VIEW
............................................................................................................................................ 10
FIGURE 3 CONNECTION DIAGRAM
.................................................................................................................................... 11
FIGURE 4 HOME PAGE OF GXV3651_FHD...................................................................................................................... 18
FIGURE 5 SYSTEM SETTINGS
P AGE ................................................................................................................................... 20
FIGURE 6 VIDEO & AUDIO SETTINGS
P AGE ...................................................................................................................... 21
FIGURE 7 VIDEO & AUDIO SETTINGS P AGE ...................................................................................................................... 22
FIGURE 8 CMOSSETTINGS
P AGE ..................................................................................................................................... 23
FIGURE 9 WI-FI NETWORKING SETTING
P AGE ................................................................................................................. 24
FIGURE 10 NETWORK SETTING PAGE ............................................................................................................................... 25
FIGURE 11 DDNSSETTING
P AGE ..................................................................................................................................... 26
FIGURE 12 SIP SETTING PAGE
.......................................................................................................................................... 27
FIGURE 13 STATUS P AGE .................................................................................................................................................. 29
FIGURE 14 USER MANAGEMENT
P AGE ............................................................................................................................. 30
FIGURE 15 MAINTENANCE PAGE
...................................................................................................................................... 31
FIGURE 16 SMTP SETTING PAGE ..................................................................................................................................... 32
FIGURE 17 FTP SETTING
P AGE ......................................................................................................................................... 33
FIGURE 18 PTZ SETTING
P AGE ......................................................................................................................................... 34
FIGURE 19 PTZ C ONNECTION ........................................................................................................................................... 35
FIGURE 20 ALARM HTTP SERVER SETTING
P AGE ........................................................................................................... 36
FIGURE 21 ALARM EVENT SETTING
P AGE ........................................................................................................................ 37
FIGURE 22 ALARM OUTPUT CONNECTION ........................................................................................................................ 40
FIGURE 23 MOTION DETECTION CONFIGURATION PAGE
................................................................................................. 41
FIGURE 24 MOTION DETECTION SCHEDULE CONFIGURATION PAGE
............................................................................... 42
FIGURE 25 SYSLOG CONFIGURATION PAGE
..................................................................................................................... 43
FIGURE 26 LIVE STORAGE MANAGEMENT PAGE ............................................................................................................. 44
FIGURE 27 FIRMWARE UPGRADE AND PROVISIONING
..................................................................................................... 45
FIGURE 28 FACTORY RESET FROM WEB
I NTERFACE ........................................................................................................ 47

Grandstream Networks, Inc.
GXV3651_FHD User Manual
Firmware Version 1.0.1.71
Page 4 of 51
Last Updated: 3/2013
WELCOME
The GXV3651_FHD is a next generation IP camera for remote monitoring and surveillance over your
LAN or Internet.
The GXV3651_FHD combines best in class IP video technology and SIP protocols for a robust IP
surveillance solution. The product features H.264 video streams with up to 30 frames per second at 1080p
resolution, delivering rich image clarity at rapid transmission rates. Integrated SIP can pass alarms to the
PSTN, mobile phones, SIP IP phones, SIP videophones and enables 2-way VoIP communication.
The GXV3651_FHD ensures ease of use, integration and deployment with a multilingual graphical user
interface. The GXV3651_FHD can be quickly installed and connected to your network and accessed from
anywhere over the internet. Grandstream’s flexible video management software enables users to monitor
multiple environments in one easy to use application. The intuitive web interface lets users easily access,
manage, view and record live video streams from the device.
The GXV3651_FHD is a powerful solution for small to medium sized offices, homes and storage facilities
looking to safeguard their valuables.

Grandstream Networks, Inc.
GXV3651_FHD User Manual
Firmware Version 1.0.1.71
Page 5 of 51
Last Updated: 3/2013
Safety Compliances
These instructions are intended to assist users with the operation of the GXV3651_FHD and also to
instruct on how to avoid dangerous situations or damage to the device.
Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
Cautions: Injury or damage to the equipment may occur if any of the following caution messages
are neglected.
Warnings Follow these safeguards to prevent
serious injury or death. Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source
with DC 12V according to the IEC60950-1 standard. Please refer to the technical specifications for
more details.
Do not use a third-party power adapter or power cord
When the device is installed on the wall or ceiling, make sure that it is firmly attached.
Notice ：
Make sure that the power supply voltage is correct before using the camera. Do not drop the device or
expose it to physical shock.
Do not expose the device to temperatures outside the range of -30 ºC to +50 ºC. PSU and PoE mode
when the device is in operation.
Do not expose the device to high electromagnetism radiation.
To avoid heat accumulation, make sure that your operating environment has proper ventilation.
Do not attempt to open, disassemble, or modify the device
A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their
average life time. The average life time varies from the differences between operating environments and
usage history. Regular maintenance checks are recommended for all users. Please contact your dealer
for more details.

Grandstream Networks, Inc.
GXV3651_FHD User Manual
Firmware Version 1.0.1.71
Page 6 of 51
Last Updated: 3/2013
Note ：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.

Grandstream Networks, Inc.
GXV3651_FHD User Manual
Firmware Version 1.0.1.71
Page 7 of 51
Last Updated: 3/2013
Warranty
If you purchased your GXV3651_FHD from a reseller, please contact the company where you purchased
your device for replacement, repair or refund.
If you purchased the product directly from Grandstream, please contact your Grandstream Sales and
Service Representative for a RMA (Return Materials Authorization) number before you return the
product. Grandstream reserves the right to remedy warranty policy without prior notification.
Caution:
Changes or modifications to this product not expressly approved by Grandstream, or operation of this
product in any way other than as detailed by this User Manual, could void your manufacturer warranty.
Please do not use a different power adaptor with the GXV3651_FHD as it may cause damage to the
products and void the manufacturerwarranty.
•This document is subject to change without notice. The latest electronic version of this user manual
is available for download at:
http://www.grandstream.com/products/surveillance/gxv3651/documents/gxv3651_fhd_user
manual.pdf
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose is not permitted without the express written permission of Grandstream Networks, Inc.

Grandstream Networks, Inc.
GXV3651_FHD User Manual
Firmware Version 1.0.1.71
Page 8 of 51
Last Updated: 3/2013
PACKAGE CONTENTS
Equipment Package Contents
The GXV3651_FHD package contains:
•GXV3651_FHD IP Camera
•12V DC power Adapter
•6-pin terminal block connector – 6-pin connector block for connecting external devices, such as
infrared detector, smoke detector and etc., to Alarm IN, Alarm OUT and RS485 pins.
•Quick installation guide

Grandstream Networks, Inc.
GXV3651_FHD User Manual
Firmware Version 1.0.1.71
Page 9 of 51
Last Updated: 3/2013
PRODUCT OVERVIEW
GXV3651_FHD Side View
Figure 1 Side
view
Note: The above shown is an 3rd party optional Auto Iris Lens (Not Supplied)

Grandstream Networks, Inc.
GXV3651_FHD User Manual
Firmware Version 1.0.1.71
Page 10 of 51
Last Updated: 3/2013
GXV3651_FHD Back Panel
Indicators and Connectors on Back Panel
Figure 2 Back panel
view
• NETWORK: 10/100 Switch LAN port for connecting to Ethernet. The indicator will
be steady for connection and flashing for network activity.
•
AUDIO IN:
3.5mm port for audio input devices (Microphone, pickup and etc.).
•
AUDIO OUT:
3.5mm port for audio output devices (speakers, and etc.).
•
•
VOUT:
DC 12V:
1 BNC (Voltage: 1.0V p-p, Resistance75Ω) port for video output.
12V DC power jack; UL Certified.
•
SD/MMC:
SD card slot.
•
RESET:
Press the Reset button for 10 seconds to perform a factory reset.
•
PINs:
1 PTZ connector, Alarm In connector, and Alarm out connector.
•
USB:
For supported Wi-Fi Dongle
•
POWER :
The indicator will be solid green if the power is on.

Grandstream Networks, Inc.
GXV3651_FHD User Manual
Firmware Version 1.0.1.71
Page 11 of 51
Last Updated: 3/2013
GXV3651_FHD Sample Connection Diagram
Figure 3 Connection
diagram

Image Sensor
1/2.5”, 5-Megapixel CMOS, 2592x1944 (pixels),
exceptionally low noise levels and low-light sensitivity for
superior video quality at very high resolution (1080p)
Lens Type
½”, 4.5-10mm, Manual-Iris, CS
Day & Night
Electronic, with integrated IR_CUT and light sensor
Responsitivity
1.4V/lux-sec (550nm)
Video Resolution
15fps at 2048x1536; 30fps for 1920x1080,
1600x1200, 1280x960, 1280x720, 1024x768, 800x592,
800x480, 640x480, 640x368, 480x368, 480x272, 320x240,
320x176, 256x192 and 256x144
Pixel Dynamic Range
70.1dB, with SNRMAX 38.1dB (full resolution)
Max Frame Rate in Max Resolution
1920x1080 @ 30fps
Video Bit Rate
32 Kbps – 8 Mbps, multi rate for preview and recording
Audio Input
LINE-IN, built in microphone
Audio Output
LINE-OUT
Audio Compression
G.711 U/A, AAC
IRIS Control
Manual IRIS (default lens), optional auto-iris lens
Alarm Input
Vin≤45V, Iin≤35mA, Normal open
Alarm Output
125VAC/0.5A,30VDC/2A, Normal open
Embedded Analytics
Motion detection (up to 16 regions),video loss (pending)
Video Management System
ONVIF compliant, HTTP API for advanced integration
Pre-/post-alarm Buffer
24MB
Pre-/post-alarm triggered record
Pre-30s and post-60s recording@2Mbps;
Pre-50s and post-100s recording@1Mbps
Snapshots
Triggered upon events, send via email/FTP,
or stored in local SD card
Multi-streaming Preview & Recording
Yes
ePTZ
Yes (at 320x240 resolution)
Security
Login password, access privilege management
Peripheral Ports
Internal SDHC 2.0 socket, USB 2.0
Network Port
10M/100Mauto-sensing, RJ45
Network Protocol
TCP/UDP/IP, RTP, RTSP, DHCP, DDNS, HTTP/HTTPS,
SMTP, FTP, NTP, PPPoE
Power over Ethernet (PoE)
IEEE 802.3af default class
SIP/VoIP Support
Yes, Voice & Video-over-IP
Dimensions (W x H x L)
152mm x 68mm x 64mm (Lens not included)
Weight
0.51kg (lens not included)
Temperature / Humidity
0°C – 45°C (32°F–113°F)
Humidity 10–90% RH (non–condensing)
Power Adapter
Output: 12VDC/1A; Input: 100–240VAC, 50–60Hz
Regulatory Compliance
FCC Part 15, Subpart B Class B; CE EN 55022 Class B, EN
61000-3-2, EN 61000-3-3, EN 55024, EN 60950-1;
C-tick AS/NZS CISPR 22, CISPR 24
GXV3651_FHD Key Features
The table below lists the key features the GXV3651_FHD Supports.
Table 1: GXV3651_FHD Technical Spec
i fications
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 12 of 51
Firmware Version 1.0.1.71
Last Updated:3/2013

GXV3651_FHD Lens Specification
Parameters
GXV3651_FHD
Lens Format
1/2”
Image Sensor
1/2.5” CMOS
Focal Length
4.5mm – 10mm
Aperture Ratio
F1.6
View Angle
D:102°- 46.5°
H: 80.5°-37°
V: 60°-28°
IRIS
Manual
Minimum Object
Distance
10 cm
IR CUT Filter
Yes
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 13 of 51
Firmware Version 1.0.1.71
Last Updated: 3/2013

INSTALLATION GUIDE
Minimum Recommended System Requirement
To install GXV3651_FHD, you have to have a computer, PC recommend. The minimum recommended
PC system requirement listed below:
•Windows 2000, XP, Windows Vista, Windows 7 (32bit or 64bit)
•CPU: Intel Pentium 4 or higher, 2 GHz
•RAM: 1 GB (4 GB recommended for larger systems)
•Support for DirectX 8.0 and above.
.
Connect your GXV3651_FHD
Using the Power adapter as power supply
•Connect an RJ-45 cable to the NETWORK port of the GXV3651_FHD.
•Connect the other end of the RJ-45 cable to your network or PC.
•Connect the power supply to the DC 12V connector block inside the GXV3651_FHD.
• Connect the other end of the power supply to a wall outlet. The POWER LED will turn solid
green.
Using PoE as power supply:
•Connect an RJ-45 to the NETWORK port of the GXV3651_FHD.
• Connect the other end of the RJ-45 cable to a PoE switch. The POWER indicator will turn solid
green.
NOTE:
If you are going to connect the device to a hub/switch/router, please use a straight-through cable.
A crossover cable will be used if you are going to connect the device directly to a PC.
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 14 of 51
Firmware Version 1.0.1.71
Last Updated: 3/2013

Configuring the GXV3651_FHD via Web Browser
The GXV3651_FHD‘s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded
HTML pages allow you to configure your IP camera through Microsoft Internet Explorer.
Access the GXV3651_FHD Web Configuration
Menu
Connect the Camera to a DHCP
server.
The GXV3651_FHD by default enabled as DHCP client, it will automatically get IP address from the
network with DHCP server running. User can know the IP address assigned to the camera from DHCP
server log or using Grandstream free GS_Search tool.
1. Download the GS_Search tool from Grandstream website:
http://www.grandstream.com/products/tools/surveillance/gs_search.zip
2. Run the Grandstream GS_Search tool by double click the unzipped “GS_Search.exe”.
3. Click on button to begin device detection
4. The detected devices will appear in the Output field like below
5. Double click the column of the detected camera, the browser will automatically open and link to the
device IP and the web configuration page.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page and
start to show the video captured by the camera (by default the camera enabled anonymous access)
7. Click “Configuration”, the browser will ask credentials to authorize configuration.
8. Enter the administrator user name and password to access the Web Configuration Interface, the default
user name and password are both set to
admin .
9. In step 6, IE will indicate that “This website wants to install the following add-on: GSViewerX.cab
from Grandstream Networks Inc.”, allow the installation.
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 15 of 51
Firmware Version 1.0.1.71
Last Updated: 3/2013

10. Firefox user need to download and install the plug-in to see the video, the plug-in for Firefox is here:
http://www.grandstream.com/products/tools/surveillance/firefox_plugin.exe
NOTE:
Please temporarily disable Antivirus or Internet Security Software when download and install the
Grandstream Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer.
Connect to the Camera using Static
IP
If no DHCP server in the network or the camera does not get IP from DHCP server, user can connect the
camera to a computer via cross-over cable, using static IP to configure the camera.
The default IP, if no DHCP server; or DHCP offer time out (3 minutes), is
192.168.1.168
1. Connect the computer via cross-over Ethernet cable directly to the IP camera GXV3651_FHD
2. Configure the computer using Static IP: 192.168.1.XXX (1<XXX<255, but NOT 168) and configure
the “Subnet mask” to “255.255.255.0”. Leave the “Default Gateway” to “Blank” like below:
3. Power on the GXV3651_FHD.
4. Start the IE or Firefox browser when the network connection is up.
5. Enter 192.168.1.168 in the address bar of the browser.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page and
start to show the video captured by the camera (by default the camera enabled anonymous access)
7. Click “Configuration”, the browser will ask credentials to authorize configuration.
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 16 of 51
Firmware Version 1.0.1.71
Last Updated:31/2013

8. Enter the administrator user name and password to access the Web Configuration Interface, the default
user name and password are both set to
admin .
9. In step 6, IE will indicate that “This website wants to install the following add-on: GSViewerX.cab
from Grandstream Networks Inc.”, allow the installation.
10. Firefox user need to download and install the plug-in to see the video, the plug-in for Firefox is here:
http://www.grandstream.com/products/tools/surveillance/firefox_plugin.exe
NOTE:
Please temporarily disable Antivirus or Internet Security Software when download and install the
Grandstream Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer.
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 17 of 51
Firmware Version 1.0.1.71
Last Updated: 3/2013

GXV3651_FHD Home Web Page
The Home Page of GXV3651_FHD shown as Figure 4:
Figure 4 Home Page of GXV3651_FHD
1. Control Console: PTZ Console controller for ePTZ function.
2. ZOOM: Zoom in or Zoom out during ePTZ operation.
3. FOCUS: Adjust the focus of image (if equipped with the proper lens).
4. PTZ SPEED/DefaultButton: Adjust the rotate speed of the control console;
Default button to reset the video brightness, contrast and saturation to
factory default value.
5. BRIGHTNESS: Adjust the image brightness.
6. CONTRAST: Adjust the image contrast.
7. SATURATION: Adjust the image saturation
8. View Size: Adjust the image displaysize.
9. Configuration: Click to enter “Configuration Page” to configure the parameters of
GXV3651_FHD(Administration privilege required).
10. Language: Click to switch webpage language.
(Current supported: Chinese, English and Russian)
11. Play/Stop: Start/Stop Play the video stream in webpage.
12. Snapshot: Click to capture and save a snapshot of current video displayed.
Default directory:
C:\GS_Capture
13. Record: Click to Start/Stop record of current video into a file.
Default directory: C:\GS_Record
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 18 of 51
Firmware Version 1.0.1.71
Last Updated: 3/2013

14. Sound On/Off: Toggle to listen/stop the sound from camera
15. Talk: Toggle to talk to camera speaker. (PC microphone required)
16. Replay: Click to playback the recorded video file.
17. Record File Path: Click to adjust the file path of saved video files.
18. Motion Detection Alarm Indicator: If motion detection alarm triggered, the indicator will flash in red.
Click the indicator icon to turn off the alarm indication.
19. DI Alarm: If alarm in triggered, the indicator will flash in red.
Click the indicator icon to turn off the alarm indication.
GXV3651_FHD Configuration & Language Page
• When click the “Configuration” tab, web page will link to page to configure the related parameters of
the GXV3651_FHD.
• There are two big categories of settings: Basic Settings and Advanced Settings. Details will be
illustrated in the later Chapter.
When click the “Language” tab, supported languages will be displayed as shown below. Click to select the
related webpage display language.
•Currently firmware only support: English (default), Simplified Chinese and Russian.
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 19 of 51
Firmware Version 1.0.1.71
Last Updated: 3/2013

BASIC SETTINGS EXPLANATION
System Settings Page
This page allow user to configure the system settings of GXV3651_FHD.
Figure 5 System Settings
Page
•
Current System Time:
Display time current system is running at
•
Set the System Time:
o
Time Zone:
Configure the time system is running.
Select from pull down menu the time zone unit located
o Self-Defined Time Zone: Use the self-defined time zone for automatic daylight saving time
adjustment. Format please refer to the “help over mouse”
o Update via NTP Server: Synchronize time using NTP protocol with a Time Server
over the Internet cloud (*)
o Synchronize with
Local Computer: Synchronize time with local computer
o Set the Time Manually: Manually input the time
o Keep Current D/T: Select to use camera current displayed time
•
OSD Date Format:
Pull down to select date format displayed on video screen.
•
Device Setting:
Setting of Device Operation
o Device Name:
The name of device which will be shown in the result of
GS_Search program.
•
DI and DO Setting:
Setting the state of the Alarm IN / Alarm out Settings
NOTE:
(*) If select this option, a valid DNS server must be configured under Basic Settings 
Netw or ki ng
button has to be clicked to save all the changes made to the device.
Grandstream Networks, Inc.
GXV3651_FHD User Manual
Page 20 of 51
Firmware Version 1.0.1.71
Last Updated: 3/2013