Graphtech CS600 User manual

CS600/CS500/ IS200
USER’S MANUAL
MANUAL NO. CS600-UM-152
IMAGE SCANNER

– i –
TO ENSURE SAFE AND CORRECT USE
•To ensure safe and correct use of your Image Scanner, read this Manual thoroughly before
use.
•After having read this Manual, keep it in a handy location for quick reference as needed.
•Do not permit small children to touch the Image Scanner.
•The following describes important points for safe operation. Please be sure to observe
them strictly.
Conventions Used in This Manual
To promote safe and accurate use of the Image Scanner as well as to prevent human injury
and property damage, safety precautions provided in this manual are ranked into the three
categories described below. Be sure you understand the difference between each of the
categories.
This category provides information that, if ignored, is
highly likely to cause fatal or serious injury to the operator.
This category provides information that, if ignored, is likely
to cause fatal or serious injury to the operator.
This category provides information that, if ignored, could
cause injury to the operator or physical damage to the
Image Scanner.
Description of Safety Symbols
The symbol indicates information that requires careful attention (which includes
warnings). The point requiring attention is described by an illustration or text within
or next to the symbol.
The symbol indicates action that is prohibited. Such prohibited action is
described by an illustration or text within or next to the symbol.
The symbol indicates imperative action (that must be performed). Such im-
perative action is described by an illustration or text within or next to the symbol.
CAUTION :
DANGER
:
WARNING :

– ii –
Safety Precautions
WARNING
Do not disassemble, repair, or remodel this scan-
ner.
•Such action may cause a fire hazard or electrical
shock.
•Such action could impair the scanner’s performance
and cause it to malfunction or break down.
If the scanner generates smoke, is abnormally hot,
emits a strange odor, or otherwise functions ab-
normally, do not continue using it. Turn off its
power and unplug its power cord from the elec-
trical socket.
•Use of the scanner in such status may result in a
fire hazard or electrical shock.
•Request repair by contacting your sales representa-
tive or nearest Graphtec vendor.
•Never try to perform repair yourself. Repair work
by inexperienced personnel is extremely danger-
ous.
If the scanner is damaged from being dropped or
other impact, turn off its power and unplug its
power cord from the electrical socket.
•Use of the scanner in such status may result in a
fire hazard or electrical shock.
•Request repair by contacting your sales representa-
tive or nearest Graphtec vendor.
•Never try to perform repair yourself. Repair work
by inexperienced personnel is extremely danger-
ous.
If water or foreign matter enters the scanner, turn
off its power and unplug its power cord from the
electrical socket.
•Use of the scanner in such status may result in a
fire hazard or electrical shock.
•Request repair by contacting your sales representa-
tive or nearest Graphtec vendor.
•Never try to perform repair yourself. Repair work
by inexperienced personnel is extremely danger-
ous.
No disassembly
Unplug the power
cord from the socket
Unplug the power
cord from the socket
Unplug the power
cord from the socket

– iii –
Safety Precautions (Continued)
WARNING
Do not connect the scanner to a non-rated power
supply.
•Use of a different supply voltage may result in a
fire hazard or electrical shock.
CAUTION
Be sure to ground the earth terminal.
•Unless the scanner is grounded, the operator could
suffer an electrical shock in case of current leakage.
Insert the scanner’s power plug securely into the
electrical socket.
•After first connecting the power cord’s female plug
to the scanner, connect its male plug to the electrical
socket.
•Using the scanner with its power plug incompletely
inserted into the electrical socket could cause a fire
hazard or electrical shock.
Do not allow dust or metallic matter to adhere to
the power cord’s plug.
•If the power cord’s plugs become dirty, thoroughly
wipe them clean.
•The use of a dirty power cord plug could result in
a fire hazard or electrical shock.
When the scanner will not be used for an extended
period, unplug its power cord from the electrical
socket.
•Leaving the scanner connected to a power supply
increases its risk of short-circuiting and overheating.
Ground the
scanner
Prohibited
Beware of electrical shock
Prohibited
Unplug the power
cord from the socket
Securely insert
the power plug
into the socket

– iv –
Safety Precautions (Continued)
CAUTION
Be careful not to damage the power cord or the
interface cable and never use a damaged cord
or cable.
•Do not use unnecessary force to bend, pull, twist,
or bind the cord and cable, place a heavy object
on them, nor remodel them. Such actions could
result in scratches or damage to the cord or cable.
•Use of a damaged power cord or interface cable
may result in electrical shock or a fire hazard.
•Replace the damaged cord or cable with a new one.
When disconnecting the power cord or the inter-
face cable, do not pull on the cord/cable.
•Such action will damage the cord/cable, resulting
in a fire hazard or electrical shock. Be sure to hold
the power cord’s plug or the interface cable’s con-
nector.
Before disconnecting or reconnecting the power
cord, be sure to turn off the scanner.
•Failure to do so may damage the scanner’s per-
formance and cause it to malfunction or break down.
•Failure to do so may result in electrical shock.
Before cleaning the scanner, be sure to unplug
its power cord from the electrical socket.
•Failure to do so may result in electrical shock.
Do not install, use, or store the scanner in a loca-
tion exposed to direct sunlight and/or the direct
draft of an air conditioner or heater.
•Such location may impair the scanner’s performance
due to deformation or other damage and cause the
scanner to malfunction or break down.
Never damage or
use when damaged
Turn off the Power
switch
Pulling prohibited
Unplug the power
cord from the socket
Prohibited

– v –
Safety Precautions (Continued)
CAUTION
Do not install, use, or store the scanner in a loca-
tion that does not meet the specified temperature
and humidity ranges.
•Such location may impair the scanner’s perform-
ance and cause the scanner to malfunction or break
down.
Do not install, use, or store the scanner in a loca-
tion subject to excessive mechanical vibration or
electrical noise.
•Such location may impair the scanner’s perform-
ance and cause the scanner to malfunction or break
down.
Do not install the scanner on an unstable surface.
•The scanner could break due to impact from falling
from the surface or cause injury to the operator.
While the scanner is operating (reading or ejecting
a document), keep hands, clothing, and other
objects away from the document.
•Injury could result from an object getting tangled in
the scanner’s rollers.
Do not place any receptacle containing water or
other fluid on top of the scanner.
•Fluid falling inside the scanner may cause a fire
hazard or electrical shock due to a short circuit or
overheating.
Do not place heavy objects on the scanner.
•Such action may impair the scanner’s performance
due to deformation or other damage, and cause the
scanner to malfunction or break down.
Prohibited
Avoid water areas
Beware of electrical shock
Prohibited
Keep away
Prohibited
Install on a level surface
Prohibited

– vi –
Safety Precautions (Continued)
CAUTION
Do not use sharp, pointed articles on the scanner.
•Such action may impair the scanner’s performance
and cause the scanner to malfunction or break
down.
Do not exert pressure on the scanner.
•Such action may impair the scanner’s performance
and cause the scanner to malfunction or break
down.
•Such action could cause injury to the operator.
Do not attempt to lubricate the scanner’s mecha-
nisms.
•Such action may impair the scanner’s performance
and cause the scanner to malfunction or break
down.
•Such action may cause a fire hazard or electrical
shock due to a short circuit or overheating.
Do not clean the scanner using a volatile solvent
such as thinner or benzine.
•Such action may impair the scanner’s performance
and cause the scanner to malfunction or break
down.
Clean off the scanner’s soiled areas using a soft
cloth that has been moistened with water or a
neutral detergent (diluted with water) and then
firmly wrung out, then wipe the scanner using a
dry cloth.
For more details, see Chapter 5, “Daily Maintenance.”
Prohibited
Prohibited
Prohibited
Prohibited

– vii –
INTRODUCTION
Thank you for purchasing a Graphtec CS600/CS500/IS200 Series Image Scanner. The
CS600/CS500/IS200 Series scanners are capable of performing high-speed scanning of
documents ranging in size from ISO A4 to ANSI E (ISO A4 to ANSI D in the case of the
CS500-06 and IS200-06 models).
This User's Manual describes how to operate the CS600/CS500/IS200 Series scanners,
and also includes usage precautions. Read the manual thoroughly prior to use in order
to ensure a full understanding of the product's features, and to ensure effective use. Keep
the manual in a safe place where it can be accessed easily whenever necessary.
Items in this manual marked are precautions to ensure safe use.
Please be sure to observe them strictly.
Notes Regarding This Manual
•All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, without the prior written permission
of Graphtec Corporation.
•The specifications and other information in this manual are subject to change without
notice.
•While every effort has been made to provide complete and accurate information, please
contact your sales representative or nearest Graphtec vendor if you find any unclear
or mistaken information or have other comments or suggestions.
•Notwithstanding the stipulation in the preceding paragraph, Graphtec Corporation as-
sumes no liability for damages resulting from either the use of the information contained
herein or from use of the product.
•All names of companies, brands, logotypes, and products appearing in this manual are
the trademarks or registered trademarks of their respective companies.
Trademarks
Windows is a U.S. registered trademark of Microsoft Corp. Other product names mentioned
herein are trademarks or registered trademarks of their respective owners.

– viii –
Scanner Configuration
Note:The stand is an option for the CS500-06 models
CS600-11/CS500-11 CS500-06/IS200-11
CS600-11eN
CS600-11eN-PRO
CS500-11eN
CS500-11eN-PRO
CS500-06eN-PRO
IS200-11eN
IS200-11eN-PRO
USB/Ethernet model
CS600-11
CS500-11
CS500-06
IS200-11

– ix –
Usage precautions
Do not lift or move the unit by holding
the top cover, as doing so may damage
the unit. Always lift the unit by holding
the underside.
Side cover
Top cover Side cover
Take care to prevent your fingers from being caught in the gap between the top cover
and the scanner unit when opening and closing the top cover.
Top cover Top cover
Always ensure that you open the top cover and remove the cushion material before using
the product. (Refer to Section 5.1, “Opening and Closing the Top Cover”.)
Scanner Warm-up
A warm-up period is not usually required for the CS600/CS500/IS200 Series scanners.
However, if you plan to scan a color document (in particular a document with many light
colors), we recommend that you allow the CS600/CS500/IS200 Series scanners to warm
up for 10 minutes before scanning the document.
<Opening the top cover>
Do not hold the rear section of
the top cover when opening it.
<Closing the top cover>
Keep your hands away from
the front of the main unit when
closing it.
The above illustrations are of the CS600-11/ CS500-11 model.