Gravely 926064 User manual

Hydro Brush
36
04956200A•8/15
Printed in USA
ENGLISH
FRANÇAIS
E10
Model
926064 – Hydro Brush 36 12V
(SN 000101 +)
Operator’s Manual
Manuel de I’utilisateur
®

WELCOME . . . . . . . . . . . . . . . . . . . . . . 1
SAFETY. . . . . . . . . . . . . . . . . . . . . . . . . 2
Practices & Laws . . . . . . . . . . . . . . . . . . 2
Required Operator Training. . . . . . . . . . 2
Safety Alert Symbol . . . . . . . . . . . . . . . . 2
Signal Words . . . . . . . . . . . . . . . . . . . . . 2
Safety Decals. . . . . . . . . . . . . . . . . . . . . 2
Safety Rules. . . . . . . . . . . . . . . . . . . . . . 4
CONTROLS & FEATURES. . . . . . . . . . 8
Engine Key. . . . . . . . . . . . . . . . . . . . . . . 9
Fuel Valve . . . . . . . . . . . . . . . . . . . . . . . 9
Choke Control Lever . . . . . . . . . . . . . . . 9
Throttle Control Lever . . . . . . . . . . . . . . 9
Speed Selector Lever . . . . . . . . . . . . . . 9
Attachment Clutch Lever
(Right Side) . . . . . . . . . . . . . . . . . . . . . 9
Traction Drive Clutch Lever
(Left Side). . . . . . . . . . . . . . . . . . . . . . . 10
Brush Lock Trigger. . . . . . . . . . . . . . . . . 10
Dual Handle Interlock. . . . . . . . . . . . . . . 10
OPERATION . . . . . . . . . . . . . . . . . . . . . 10
Emergency Stopping . . . . . . . . . . . . . . . 10
Before Operating Unit . . . . . . . . . . . . . . 10
Start The Engine . . . . . . . . . . . . . . . . . . 10
Operate Unit. . . . . . . . . . . . . . . . . . . . . . 11
Stop the Engine . . . . . . . . . . . . . . . . . . . 11
Set Brush Height . . . . . . . . . . . . . . . . . . 11
Set Brush Angle. . . . . . . . . . . . . . . . . . . 12
Move Unit Manually . . . . . . . . . . . . . . . . 12
Transport Unit . . . . . . . . . . . . . . . . . . . . 13
MAINTENANCE . . . . . . . . . . . . . . . . . . 13
Service Position. . . . . . . . . . . . . . . . . . . 13
Return Unit to Operating Position . . . . . 15
Maintenance Schedule . . . . . . . . . . . . . 16
Service Parts . . . . . . . . . . . . . . . . . . . . . 16
Check Dual Handle Interlock . . . . . . . . . 16
Check Fasteners . . . . . . . . . . . . . . . . . . 16
Check Clutch Cable Adjustments . . . . . 16
Check Tire Pressure . . . . . . . . . . . . . . . 16
Check Engine Oil. . . . . . . . . . . . . . . . . . 16
Change Engine Oil. . . . . . . . . . . . . . . . . 16
Clean Recoil Guard Foam Cover. . . . . . 16
Lubricate Unit. . . . . . . . . . . . . . . . . . . . . 17
ADJUSTMENTS . . . . . . . . . . . . . . . . . . 18
Adjust Speed Selector Lever . . . . . . . . . 18
Adjust Attachment Clutch. . . . . . . . . . . . 18
Adjust Traction Drive Clutch . . . . . . . . . 19
STORAGE. . . . . . . . . . . . . . . . . . . . . . . 20
Short Term. . . . . . . . . . . . . . . . . . . . . . . 20
Long Term . . . . . . . . . . . . . . . . . . . . . . . 20
Start-of-Season Fuel Preparation . . . . . 21
ACCESSORIES. . . . . . . . . . . . . . . . . . . 21
TROUBLESHOOTING . . . . . . . . . . . . . 22
SPECIFICATIONS. . . . . . . . . . . . . . . . . 24
WARRANTY . . . . . . . . . . . . . . . . . . . . . 25
TABLE OF CONTENTS

EN - 1
WELCOME
Congratulations on your purchase and welcome to the Gravely family! Every power brush in the
Gravely lineup is designed for long-lasting and unsurpassed performance. We are confident
your machine will be part of your family for many years to come.
PRODUCT REGISTRATION
You or the dealer you purchased the unit from
must register the product at the time of
purchase. Know the model and serial numbers
of your unit and register online at
www.gravely.com or return the registration
card to Ariens Company. See Figure 1 for label
location.
Record model number here.
Record serial number here.
Figure 1
Model & Serial Number Label
MANUALS
Before operating or servicing the unit, carefully
and completely read the manuals provided with
the unit. They contain safety instructions and
important information about unit controls.
The engine on this unit is covered by a separate
manual. Refer to the engine manual for engine
service recommendations. Contact the engine
manufacturer for a replacement manual if
necessary.
It is your responsibility to read and understand
all safety precautions and instructions in the
manuals. If you do not understand or have
difficulty following the instructions, contact your
Gravely dealer for assistance. To locate your
nearest Gravely dealer, go to
www.gravelymower.com
DISCLAIMER
Gravely reserves the right to discontinue, make
changes to, and add improvements upon its
products at any time without public notice or
obligation. The descriptions and specifications
contained in this manual were in effect at
printing. Equipment described in this manual
may be optional. Some illustrations may not be
applicable to your unit.
Have Questions or Need Assistance?
gravely.custhelp.com • gravelymower.com
A parts manual for your unit is available for free download or purchase at
www.gravely.com.

EN - 2
Read these safety rules and follow them
closely. Failure to follow these rules could
lead to loss of control of unit, severe personal
injury or death to you or bystanders, or result
in damage to property or the unit.
PRACTICES & LAWS
Practice usual and customary safe working
precautions. Learn applicable rules and laws
in your area. ALWAYS follow the practices set
forth in this manual.
REQUIRED OPERATOR
TRAINING
The original purchaser of this unit was
instructed by the seller on safe and proper
operation. If unit is to be used by someone
other than the original purchaser, loaned,
rented, or sold, ALWAYS provide this manual
and any needed safety training before
operation.
SAFETY ALERT SYMBOL
SIGNAL WORDS
The safety alert symbol above and signal
words below are used on decals and in this
manual. Read and understand all safety
messages.
1. Danger
2. Warning
3. Caution
4. Notice
NOTICE: Indicates information or procedures
that are considered important but not hazard
related. If not followed, property damage
could result.
5. Important
IMPORTANT: Indicates general reference
information worthy of special attention.
SAFETY DECALS
The safety decals on your unit are visual
reminders of the important safety information
in this manual. All messages on your unit
must be fully understood and carefully
followed. Safety decals on the unit are
explained below.
ALWAYS replace missing or damaged safety
decals. Replacement decal information is in
the parts manual for your unit. Decals can be
ordered from your dealer.
See Figure 2 for safety decal locations.
SAFETY
WARNING: AVOID INJURY.
This unit is capable of crushing
or amputating body parts.
Failure to observe the safety
instructions in the manuals and
on decals could result in serious
injury or death.
ALWAYS stop unit and engine,
remove key and allow moving
parts to stop before leaving
operator’s position.
This is the safety alert symbol. It
means:
• ATTENTION!
• YOUR SAFETY IS
INVOLVED!
When you see this symbol:
• BECOME ALERT!
• OBEY THE MESSAGE!
DANGER: Indicates an
IMMINENTLY HAZARDOUS
SITUATION! If not avoided,
WILL RESULT in death or
serious injury.
WARNING: Indicates a
POTENTIALLY HAZARDOUS
SITUATION! If not avoided,
COULD RESULT in death or
serious injury.
CAUTION: Indicates a
POTENTIALLY HAZARDOUS
SITUATION! If not avoided, MAY
RESULT in minor or moderate
injury. It may also be used to
alert against unsafe practices.

EN - 3
Safety Decal Locations
Safety Decal Descriptions
1. WARNING!
WARNING!
NEVER direct discharge
towards persons or property
that may be injured or
damaged by thrown objects.
Keep people away from unit
while operating. Keep
children out of work area
and under watchful care of a
responsible adult.
Stop engine, remove key,
and read manual before
making any repairs or
adjustments.
Read operator’s manual.
12
07800330
07800331
Figure 2
3
4
2
1
5
5
Wear appropriate hearing
and eye protection.
Wear a dust particle mask
while operating in dusty
conditions.
2. CAUTION!
CAUTION!
Be sure to engage the
traction drive clutch first.
Engaging the attachment
clutch before traction drive
clutch can cause the unit to
travel backwards.
3. DANGER!
DANGER!
Keep clear of brush while
engine is running.
NEVER use your hands to
clear blockages.
Operating on irregular
terrain could cause the
brush to dig in and drive the
machine rearward.
Read operator’s manual.
1
2