Green image GC-1009-4C3 User manual

Receiver for RGBW Remote
& Wifi Transmitter
GC-1009-4C3
Type:
Project:
Catalog#:
Main Features
Specification Features
Product Size
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
T: [phone]
F: [phone]
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and finish in a
ny way that will not alter installed appearance or reduce function and performance.
• Compatible with different senders
• Compatible with WIFI transmitter
• Control RGBW, RGB, CC-CW, Single color LED lighting
Input Voltage
Current
Model
Output
Remarks
GC-1009-4V2
12-36V DC
4x5A
4x(60-180)W
Constant Voltage
GC-1009-4V1
12-36V DC
4x8A
4x(96-288)W
Constant Voltage
GC-1009-4C3
12-36V DC
4x350mA
4x(4.2-12.6)W
Constant Voltage
GC-1009-4C7
12-36V DC
4x700mA
4x(8.4-25.2)W
Constant Voltage
Safety & Warnings
The product must be installed and serviced by qualified personnel.
IP20. Avoid direct sunlight and rain. When installed outdoors, please ensure it is mounted in a waterproof enclosure.
Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
Please check that output voltage(s) of any LED power supplies used complies with the working voltage of the product.
Never connect any cables while power is on and always ensure correct connections to avoid short circuits before turning on.
Please ensure that the cable is secured tightly in the connector.
For update information please consult your supplier.
1
2
3
4
5
6
7
18.6
mm
170.4 mm
45.5
178.9 mm

Wiring Diagram
Receiver for RGBW Remote
& Wifi Transmitter
GC-1009-4C3
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
T: [phone]
F: [phone]
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and finish in a
ny way that will not alter installed appearance or reduce function and performance.
Brief Introduction of Buttons
For LED Lighting
(RGB/CCT/Single Colour LED Light)
Learning to Sender
12-36VDC Power Input,
or connect next DALI dimmer
Short circuit for master,
Open circuit for slave

Warranty Agreement
Receiver for RGBW Remote
& Wifi Transmitter
GC-1009-4C3
greenimagetech.com
105 8288 N Fraser Way
Burnaby BC, V3N 0E9
T: [phone]
F: [phone]
© Green Image Tech, LTD. All rights reserved. We reserve the right to change design, materials
and finish in a
ny way that will not alter installed appearance or reduce function and performance.
1
2
3
We provide lifelong technical assistance with this product:
• 5-year warranty. Every product has a date printed for warranty expiration (ie. 1125 means year 2011, week 25).
The warranty is for free repair or replacement and covers manufacturing faults only.
• For faults beyond the 5-year warranty, we reserve the right to charge for labour and parts.
Limited Warranty
• Any defects caused by incorrect or inappropriate operation.
• Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of chips.
• Any damages due to transportation, vibration etc. after purchase.
• Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
• Any damages caused by negligence, including storing in high temperatures, humidity or proximity to harmful chemicals.
• Product has been updated.
Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Operation
Learning Process (Matching)
a) Ensure wiring is according to connection diagram.
b) Wake up the remote control by touching ON/OFF button.
c) Press learning button on receiver.
d) Touch any zone button on remote control.
e) Touch colour wheel.
f) Connected LED light will blink to confirm zone designation.
g) Press learning button on receiver for 5 seconds until LED light flashes, this deletes the learned ID.
NOTE 1: To choose a master from slaves by jumper for each zone. Short circuit for master. Open circuit for slave. Each zone can
only set one master controller. After a period of time, the master will run synchronization operations to keep the same colour or
mode of all slaves in one zone.
NOTE 2: Each remote controls 8 zone (areas) receivers, each area can save (learn) as many receivers as desired.
Each receiver can be controlled by a maximum of 8 different remote controllers.