Greenbroz 215 Alchemist User manual
DRY TRIMMER USER MANUAL
215 & 420 MODELS
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 2
TABLE OF CONTENTS
P.04P.03 P.05
P.13
P.07
P.14
P.08 P.10
O
P.16
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 3
DISCLOSURES
WARNING
This machine contains sharp moving parts. Do not
Failure to comply with the above may result in
serious injury.
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 4
MACHINE PARTS
1. Cutting Chamber Access Lid
2. Safety Shutoff Switch
3. Trim Chamber
4. Trim Blades
5. Brush Assembly
6. Hub Assembly
7. Sweeper Bar
8. Blade Tension Screw
9. Table Top Tray (Dry Trimmer 215 Model Only): Catches trim.
10. Timer
11. Power Outlet Switch
12. Forward/Reverse Switch
13. Exit Door / Ramp
14. Floor Stand
1
2
3
4
5
678
10
11
12
13
9
14
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 5
UNPACKING THE MACHINE
The day has come and you have an incredible new machine in your hands!
Congratulations and thank you!
•
•
•
•
not in use.
DO NOT BEND OR PRY THE BLADE, YOU MAY DAMAGE IT!
1.
2.
3.
4.
5.
6.
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 6
Your machine is now prepped and ready to use!
UNPACKING THE MACHINECONTINUED
7.
8.
9.
fig. 1.a fig. 1.b fig. 1.c
fig. 1.d fig. 1.e fig. 1.f
fig. 1.g fig. 1.h fig. 1.i
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 7
PREPARATION OF MATERIAL
PRIOR TO PROCESSING
The Greenbroz Dry Trimmers are intended for trimming of DRY material.
Using wet material will cause excessive residue on the blades and cutting chamber,
and will provide less than optimal results
Use these simple tests to evaluate your product prior to processing:
Prepping your product:
1.
2.
3.
fig. 2.a fig. 2.b fig. 2.c
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 8
OPERATION OF THE MACHINE
We recommend reviewing all of the disclosures on page 3 and following all of the
instructions to ensure safety and optimal processing.
Overlling may cause bunching up of material behind the brush. However,
you want to process with a minimum ll as it provides gentle downward pressure.
1.
2.
3.
4.
5.
6.
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 9
OPERATION OF THE MACHINECONTINUED
Refrain from running the machine in reverse and allowing the sweeper bar to pass
under the brush as force will be applied to the material.
Every strain is different, so it is up to the operator to determine when the trimming
is complete.
the machine and into your container.
7.
8.
9.
fig. 3.a fig. 3.b fig. 3.c
fig. 3.d
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 10
CLEANING THE MACHINE
Here is what you will need to clean your machine.
•
•
•
•
•
•
•
machine.
surface.
When the blade is upside down do not put any weight or pressure on the
surface as this may cause warping or uneven wear issues.
grooves.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 11
CLEANING THE MACHINECONTINUED
Congratulations! Your machine is now clean and ready for another run!
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 12
CLEANING THE MACHINECONTINUED
fig. 4.a fig. 4.b fig. 4.c
fig. 4.d fig. 4.e fig. 4.f
fig. 4.g fig. 4.h fig. 4.i
fig. 4.j fig. 4.k fig. 4.l
fig. 4.m fig. 4.n fig. 4.o
fig. 4.p fig. 4.q fig. 4.r
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 13
WARRANTY REGISTRATION
GO TO WWW.GREENBROZ.COM TO REGISTER.
within 30 days from purchase date to activate your warranty.
ALL INFORMATION OBTAINED BY GREENBROZ INC. WILL BE KEPT
YOUR INFORMATION WITHOUT CONSENT.
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 14
LIMITED WARRANTY
Products Covered
Length of Warrant12 months from the date of
To Qualify for this Warranty
What GreenBroz will repair or replace under warranty
To obtain Warranty Service
Exclusions
third party that is not the registered owner.
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 15
LIMITED WARRANTYCONTINUED
Disclaimer of Consequential Damage and Limitation of Implied Warranties: This
GREENBROZ INC. DRY TRIMMER USER MANUAL 2016 16
ADDITIONAL RESOURCES
WWW.GREENBROZ.COM
THANK YOU.
Other manuals for 215 Alchemist
1
This manual suits for next models
1
Table of contents
Other Greenbroz Trimmer manuals
