Griffin Technology S80 User manual

Company information
and Support
www.Griffin-Stands.com
Snare Drum
Stand
www.Griffin-Stands.com
www.Griffin-Stands.com
Griffin™ stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest
needs and trends of the current market. We take
pride in the Griffin™ brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessories market.
Performance Issue, Uneven or Unstable- Make
sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counter-
clockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.
Missing Parts- The pictures, videos and images
shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.
User Manual
M o d e l # S 8 0 / S 1 0 0 / S 2 S T
Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |
[email protected] | www.Griffin-
Stands.com
Product Specifications
For current product specifications, please to go
www.griffin-stands.com and type the model number
into the search bar. Locate the product listing to view
the current factory specifications. Thank you for purchasing the Griffin Snare Drum
Stand. Your product comes with a 1 year factory
warranty from purchase date. Please read all
assembly instructions prior to assembling your new
cart. Pictures that may aid in assembly can be found
by going to www.griffin-stands.com and typing
S80/S100/S2ST into the search bar.
Thank you for your Purchase
Trouble Shooting

Assembly and
Demonstration
Video
Assembly Instructions
Step 1 – Take the main stand with legs and
loosen the knob, spread the legs wide and
tighten the knob to lock the legs in place as
shown in Figure 1.
Step 2 – Insert the middle pipe trough the main
stand. A memory lock is included in the part
where you can adjust to lock the height
adjustment in place. This will keep your preferred
height. Turn the knob to tighten in place (See
Figure 2). Then adjust the height of the stand by
sliding up or down the top interlocking pipe to
achieve your preferred height. Please scan the QR Code below for the product
demonstration video. Or go to the URL shown here and find
the product video. www.Griffin-Stands.com/Videos
Step 3 – Just below the snare drum basket is a
knob which you can adjust according to your
preferred angle. Insert your snare drum and use
the circle knob just at the bottom of the basket to
close the basket claws and secure the snare drum
in place (See Figure 3).
Step 4 – If the top pipe is sliding, turning or
dropping, then you need to secure the top pipe by
using the supplied memory lock. First, Make sure
the memory lock is tight by using a drum key to
tighten it. Then lock the lip on the memory lock
into the slot fitted for the memory lock on the
bottom coupler pipe. This will interlock the top
pipe with the bottom pipe which will fix the
sliding and/or turning problem. Please refer to
Figure 2 where the memory lock is. Please see
YouTube video URL
https://youtu.be/Z_aM3p10aiU
Step 5 – For safety reasons, please always make
sure to test the stability and safety of the product
before use. Double check all nuts and bolts, knobs
and connectors, make sure that these are tight
and securely fastened before use of your product.
Test the product under light use or light loads the
first time to confirm assembly and structure of the
product is correct.