Grizzly H6194 User manual

Introduction
Heavy-duty industrial air drill features paddle
switch for easy control, a 3⁄8" Jacobs® chuck, rear
air exhaust and rugged aluminum body. It has a
22,000 RPM free speed with 4 CFM average air
consumption.
A. Industrial Air Drill ........................................ 1
B. 3⁄8" Jacobs® Chuck ...................................... 1
C. Chuck Key .................................................. 1
D. Wrench ....................................................... 1
Operation
Screw the chuck on the arbor and tighten with the
wrench provided. Add a 1⁄4" MNPT air fitting and
connect to your regulated compressed air supply.
Do not exceed 90 PSI!
MODEL H6194
3⁄8" INDUSTRIAL AIR
DRILL
INSTRUCTION SHEET
Figure 1. Model H6194.
Figure 2. Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: [phone].
COPYRIGHT © APRIL, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8030 PRINTED IN CHINA
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service!
EXPLOSION HAZARD!
Never exceed 90 PSI!
EYE/EAR INJURY HAZARD!
Wear safety glasses and
hearing protection during
use of this tool!
This industrial air drill MUST have 3-4 drops of oil
directly dropped into the air fitting before each use
as shown in Figure 2.

H6194 Parts Breakdown and List
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PH6194001 VALVE SCREW 16 PH6194016 CYLINDER
2 PH6194002 O-RING 17 PH6194017 ROTOR BLADE
3 PH6194003 O-RING 18 PH6194018 ROTOR
4 PH6194004 AIR REGULATOR 19 PH6194019 ROTOR COLLAR
5 PH6194005 SPRING 20 PH6194020 FRONT END PLATE
6 PH6194006 O-RING 21 PH6194021 BALL BEARING
7 PH6194007 VALVE STEM 22 PH6194022 SPINDLE
8 PH6194008 LEVER PIN 23 PH6194023 CLAMP NUT
9 PH6194009 THROTTLE PIN 24 PH6194024 HOUSING CAP
10 PH6194010 MOTOR HOUSING 27 PH6194027 VALVE BUSHING
11 PH6194011 EXHAUST DEFLECTOR 28 PH6194028 CHUCK KEY
12 PH6194012 AIR INLET 29 PH6194029 O-RING
13 PH6194013 BALL BEARING 30 PH6194030 SPANNER WRENCH
14 PH6194014 REAR END PLATE 31 PH6194031 CHUCK
15 PH6194015 STEEL BALL