Grizzly G0451 User manual
MODEL G0451
14" SLIDING TABLE SAW
OWNER'S MANUAL
8DENG><=I6EG>A!'%%*7N<G>OOAN>C9JHIG>6A!>C8#!G:K>H:9B6N!'%&& IH
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
;DGBD9:AHB6CJ;68IJG:9H>C8:*$&%:L+.(,EG>CI:9>CI6>L6C
This manual provides critical safety instructions on the proper setup,
operation, maintenance, and service of this machine/tool. Save this
document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual
may result in fire or serious personal injury—including amputation,
electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use.
This responsibility includes but is not limited to proper installation in
a safe environment, personnel training and usage authorization,
proper inspection and maintenance, manual availability and compre-
hension, application of safety devices, cutting/sanding/grinding tool
integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage
from negligence, improper training, machine modifications or misuse.
3OMEDUSTCREATEDBYPOWERSANDINGSAWINGGRINDINGDRILLINGAND
OTHERCONSTRUCTIONACTIVITIESCONTAINSCHEMICALSKNOWNTOTHE3TATE
OF#ALIFORNIATOCAUSECANCERBIRTHDEFECTSOROTHERREPRODUCTIVE
HARM3OMEEXAMPLESOFTHESECHEMICALSARE
s ,EADFROMLEADBASEDPAINTS
s #RYSTALLINESILICAFROMBRICKSCEMENTANDOTHERMASONRYPRODUCTS
s !RSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER
9OURRISKFROMTHESEEXPOSURESVARIESDEPENDINGONHOWOFTENYOU
DOTHISTYPEOFWORK4OREDUCEYOUREXPOSURETOTHESECHEMICALS
7ORKINAWELLVENTILATEDAREAANDWORKWITHAPPROVEDSAFETYEQUIP
MENTSUCHASTHOSEDUSTMASKSTHATARESPECIALLYDESIGNEDTOFILTER
OUTMICROSCOPICPARTICLES
Table of Contents
INTRODUCTION............................................... 2
BVcjVa6XXjgVXn########################################### '
8dciVXi>c[d####################################################'
>YZci^[^XVi^dc7Vh^X8dcigdah####################### (
<adhhVgnD[IZgbh######################################### +
BVX]^cZ9ViVH]ZZi###################################### ,
8jii^c\8VeVX^i^Zh######################################## &%
SECTION 1: SAFETY..................................... 11
HV[Zin>chigjXi^dch[dgBVX]^cZgn################ &&
6YY^i^dcVaHV[Zin[dgIVWaZHVlh################# &(
SECTION 2: POWER SUPPLY ...................... 14
KdaiV\Z8dckZgh^dc###################################### &+
SECTION 3: SETUP ....................................... 17
CZZYZY[dgHZije######################################### &,
JceVX`^c\#################################################### &,
=VgYlVgZGZXd\c^i^dc8]Vgi####################### &-
>ckZcidgn######################################################&.
8aZVcje######################################################## '&
H^iZ8dch^YZgVi^dch###################################### ''
Bdk^c\EaVX^c\7VhZJc^i######################## '(
6hhZbWanHZije####################################### ')
EdlZg8dccZXi^dc######################################## ('
IZhiGjc###################################################### ((
SECTION 4: OPERATIONS ........................... 35
DeZgVi^dcDkZgk^Zl##################################### (*
Ldg`e^ZXZ>cheZXi^dc################################### (+
Cdc"I]gdj\]I]gdj\]8jih##################### (+
7aVYZ<jVgYG^k^c\@c^[Z######################### (,
7aVYZGZfj^gZbZcih#################################### (.
7aVYZHZaZXi^dc############################################ (.
8]Vc\^c\BV^c7aVYZ################################## )&
8]Vc\^c\6Y_jhi^c\HXdg^c\7aVYZ########### )'
G^e8jii^c\################################################### )(
8gdhhXjii^c\################################################# )*
B^iZg8jii^c\################################################# ),
9VYd8jii^c\################################################ )-
GVWWZi8jii^c\############################################# ).
GZhVl^c\##################################################### *%
SECTION 5: SHOP MADE SAFETY
ACCESSORIES .............................................. 52
;ZVi]ZgWdVgYh############################################## *'
Ejh]Hi^X`h################################################## **
Ejh]7adX`h################################################# *+
CVggdl"G^e6jm^a^Vgn;ZcXZEjh]7adX`## *,
SECTION 6: AFTERMARKET
ACCESSORIES FROM GRIZZLY .................. 59
SECTION 7: MAINTENANCE......................... 61
HX]ZYjaZ###################################################### +&
8aZVc^c\#######################################################+&
JceV^ciZY8Vhi>gdc##################################### +&
AjWg^XVi^dc################################################### +'
SECTION 8: SERVICE ................................... 63
IgdjWaZh]ddi^c\########################################### +(
7ZaiHZgk^XZ################################################## +*
7aVYZI^ai8Va^WgVi^dc#################################### ++
Ha^Y^c\IVWaZEVgVaaZa6Y_jhibZci################ +,
IVWaZBdkZbZci6Y_jhibZci####################### +-
HfjVg^c\8gdhhXji;ZcXZid7aVYZ############## +.
6Y_jhi^c\G^k^c\@c^[ZBdjci^c\7adX`######## ,%
SECTION 9: WIRING...................................... 71
L^g^c\HV[Zin>chigjXi^dch############################ ,&
L^g^c\DkZgk^Zl########################################### ,'
:aZXig^XVa7dmVi''%KL^g^c\###################### ,(
:aZXig^XVa7dmVi))%KL^g^c\###################### ,)
8dcigdaEVcZaL^g^c\#################################### ,*
BV^cBdidgL^g^c\######################################## ,+
HXdg^c\BdidgL^g^c\################################### ,,
SECTION 10: PARTS..................................... 78
:aZXig^XVa8dbedcZcih################################# ,-
8gdhhXji;ZcXZ############################################ ,.
8gdhhXjiIVWaZ############################################# -%
8VW^cZi7dYn############################################### -&
BV^c7aVYZ################################################### -(
BV^c7aVYZ6gWdg######################################### -*
Ha^Y^c\IVWaZ################################################ -+
IVWaZh########################################################## --
G^e;ZcXZ##################################################### -.
HXdg^c\Bdidg############################################### .%
6Y_jhibZciL]ZZah###################################### .'
Hl^c\6gb#################################################### .(
BV^cBdidgEVgih######################################### .)
BVX]^cZAVWZah6######################################## .*
BVX]^cZAVWZah7######################################## .+
WARRANTY & RETURNS ........................... 101
"'" BdYZa<%)*&B[\#H^cXZ*$&%
INTRODUCTION
LZVgZegdjYidd[[Zgi]^hbVcjVal^i]ndjgcZl
bVX]^cZ LZkZ bVYZ ZkZgn Z[[dgi id WZ ZmVXi
l^i] i]Z ^chigjXi^dch! heZX^[^XVi^dch! YgVl^c\h!
VcY e]did\gVe]h d[ i]Z bVX]^cZ lZ jhZY l]Zc
lg^i^c\i]^hbVcjVa#=dlZkZg!hdbZi^bZhlZhi^aa
bV`ZVcdXXVh^dcVab^hiV`Z#
6ahd!dl^c\id djgeda^Xnd[Xdci^cjdjh^begdkZ"
bZci!your machine may not exactly match the
manual#>[ndj[^cYi]^hidWZi]ZXVhZ!VcYi]ZY^["
[ZgZcXZWZilZZci]ZbVcjVaVcYbVX]^cZaZVkZh
ndj ^c YdjWi! X]ZX` djg lZWh^iZ [dg i]Z aViZhi
bVcjVajeYViZdgXVaaiZX]c^XVahjeedgi[dg]Zae#
7Z[dgZXVaa^c\![^cYi]ZbVcj[VXijgZYViZd[ndjg
bVX]^cZWnadd`^c\Vii]ZYViZhiVbeZY^cidi]Z
bVX]^cZ >9 aVWZa hZZ WZadl# I]^h l^aa ]Zae jh
YZiZgb^cZ ^[ i]Z bVcjVa kZgh^dc ndj gZXZ^kZY
bViX]Zhi]ZbVcj[VXijgZYViZd[ndjgbVX]^cZ#
;dgndjgXdckZc^ZcXZ!lZedhiVaaVkV^aVWaZbVc"
jVahVcYbVcjVajeYViZh[dg[gZZdcdjglZWh^iZ
Viwww.grizzly.com#6cnjeYViZhidndjgbdYZa
d[ bVX]^cZ l^aa WZ gZ[aZXiZY ^c i]ZhZ YdXjbZcih
VhhddcVhi]Z
n
VgZXdb
e
aZiZ#
BVcj[VXijgZ9ViZ
d[NdjgBVX]^cZ
Manual Accuracy
LZ hiVcY WZ]^cY djg bVX]^cZh# >[ ndj ]VkZ
VcnfjZhi^dch dg cZZY]Zae! jhZ i]Z^c[dgbVi^dc
WZadlidXdciVXijh#7Z[dgZXdciVXi^c\!eaZVhZ\Zi
i]ZhZg^Va cjbWZg VcYbVcj[VXijgZ YViZ d[ndjg
bVX]^cZ#I]^hl^aa]Zaejh]Zaendj[VhiZg#
<g^ooanIZX]c^XVaHjeedgi
&'%(AnXdb^c\BVaa8^gXaZ
BjcXn!E6&,,*+
E]dcZ/*,%*)+".++(
:bV^a/iZX]hjeedgi5\g^ooan#Xdb
LZlVcindjg[ZZYWVX`dci]^hbVcjVa#L]ViY^Y
ndj a^`Z VWdji ^i4 L]ZgZ XdjaY ^i WZ ^begdkZY4
EaZVhZiV`ZV[Zlb^cjiZhid\^kZjh[ZZYWVX`#
<g^ooan9dXjbZciVi^dcBVcV\Zg
E#D#7dm'%+.
7Zaa^c\]Vb!L6.-'',"'%+.
:bV^a/bVcjVah5\g^ooan#Xdb
Contact Info
BdYZa<%)*&B[\#H^cXZ*$&% "("
Identification & Basic Controls
JhZFigures 1–5VcYi]Z[daadl^c\YZhXg^ei^dchid
\V^c Vc jcYZghiVcY^c\d[i]Z[ZVijgZhVcY WVh^X
Xdcigdahd[i]ZiVWaZhVl#I]^h`cdlaZY\Zl^aaWZ
gZfj^gZY id egdeZgan hZi je i]Z bVX]^cZ [dg i]Z
iZhigjc#
A. Flip Stops. JhZY[dgfj^X`XgdhhXjii^c\bZV"
hjgZbZcih#
B. Crosscut Fence. JhZY Yjg^c\ XgdhhXjii^c\
deZgVi^dch# ;ZVijgZh V hXVaZ VcY bjai^eaZ
[a^e"hinaZ hide WadX`h [dg egZX^hZ! gZeZViVWaZ
XgdhhXjii^c\deZgVi^dch#
C. Sliding Table·8dckZc^Zcian \a^YZh i]Z
ldg`e^ZXZ i]gdj\] i]Z WaVYZ l^i] egZX^h^dc
VcYZVhZ#
Figure 1. BV^ck^Zld[bVX]^cZ[ZVijgZhVcYXdcigdah#
678
9
:
;
<
=
>
D. Blade Guard. BV^ciV^ch bVm^bjb egdiZX"
i^dc VgdjcY i]Z hVl WaVYZ! VcY V ' Yjhi
edgiZ[[ZXi^kZanZmigVXihYjhi[gdbi]ZXjii^c\
deZgVi^dc#
E. Rip Fence. ;ZVijgZhb^Xgd"VY_jhibZci`cdW
[dgegZX^h^dcVY_jhibZcih#;ZcXZ[VXZXVcWZ
edh^i^dcZY[dghiVcYVgYXjii^c\deZgVi^dch!dg
^c i]Z adlZg edh^i^dc! [dg WaVYZ \jVgY XaZVg"
VcXZYjg^c\cVggdlg^ee^c\deZgVi^dch#
F. Control Panel. ;ZVijgZh ejh]"Wjiidc Xdc"
igdah [dg deZgVi^c\ i]Z bVcn [ZVijgZh d[ i]Z
hVl#
G. Blade Angle Handwheel. 6Y_jhihi]ZVc\aZ
d[i]ZhVlWaVYZh#
H. Blade Elevation Handwheel. 6Y_jhih i]Z
]Z^\]id[i]ZbV^chVlWaVYZ#
I. Crosscut Table. Egdk^YZh V l^YZ! hiVWaZ
eaVi[dgb[dghjeedgi^c\[jaa"h^oZeVcZahYjg^c\
XgdhhXjii^c\deZgVi^dch#
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
")" BdYZa<%)*&B[\#H^cXZ*$&%
O. Riving Knife·BV^ciV^ch`Zg[deZc^c\Yjg^c\
Xjii^c\deZgVi^dch# I]^h[jcXi^dc^hXgjX^Va^c
egZkZci^c\`^X`WVX`XVjhZYWni]Z`Zg[Xadh"
^c\WZ]^cYi]ZWaVYZ#
P. Scoring Blade·HbVaa Xjii^c\ WaVYZ i]Vi
gdiViZh deedh^iZ i]Z bV^c hVl WaVYZ# I]Z
WaVYZhXdgZhi]Zldg`e^ZXZWZ[dgZi]ZVXijVa
Xjii^c\ deZgVi^dc ^h eZg[dgbZY egZkZci^c\
iZVg"dji ^c aVb^cViZ bViZg^Vah# I]Z hXdg^c\
WaVYZ^hVY_jhiVWaZ[dglVgYVcYWVX`lVgY!je
VcYYdlc!VcY^ci]^X`cZhhd[`Zg[#
Q. Main Blade·EZg[dgbh i]Z Xjii^c\ deZgV"
i^dch#
Figure 3#7aVYZh#
J. Fence Assembly Lock Down Lever.
HZXjgZhi]Z[ZcXZVhhZbWan^cedh^i^dcVadc\
i]Z[ZcXZgV^a#
K. Rip Fence Scale. 6aadlh egZX^hZ bZVhjgZ"
bZcih[dgg^eXjii^c\deZgVi^dch#
L. Slide Lock Handle. HZXjgZh i]Z Vajb^cjb
[ZcXZ e^ZXZ dc ^ih [dglVgY$WVX`lVgY ha^YZ
igVX`#
M. Micro-Adjustment Lock Knob. HZXjgZhi]Z
[ZcXZ V[iZg ^i ]Vh WZZc VY_jhiZY l^i] i]Z
b^Xgd"VY_jhibZci`cdW#
N. Micro-Adjustment Knob. EgZX^hZan VY_jhih
i]Z[ZcXZ#
Figure 2#;ZcXZXdcigdah#
?
@A
B
C
DE
F
BdYZa<%)*&B[\#H^cXZ*$&% "*"
R. Power ON/OFF Switch. 8dccZXihedlZgid
Vaa bdidgh ^c i]Z hVl! VcY XVc WZ Y^hVWaZY
l^i]i]Z`Zn#
S. Power Indicator Light. >cY^XViZhVa^kZedlZg
XdccZXi^dcidi]ZbVX]^cZ#
T. Main Blade OFF Button. Hideh i]Z bV^c
hVlWaVYZbdidg#
U. Scoring Blade OFF Button. Hidehi]ZhXdg"
^c\WaVYZbdidg#
V. Primary Emergency Stop Button.
9^hXdccZXihedlZgidWdi]bdidgh#
W. Scoring Blade ON Button. HiVgihi]ZhXdg"
^c\WaVYZ#
Note: The main saw blade must be ON for
the scoring blade to start.
X. Main Blade ON Button. HiVgihi]ZbV^chVl
WaVYZ#
Figure4#8dcigdaeVcZa#
GHI
J
JK
L
M
Y. Scoring Blade Elevation Knob. 6Y_jhihi]Z
]Z^\]id[i]ZhXdg^c\WaVYZ#
Z. Scoring Blade Alignment Knob. 6Y_jhihi]Z
h^YZ"id"h^YZVa^\cbZcid[i]ZhXdg^c\WaVYZid
i]ZbV^cWaVYZ#
AA. Secondary Emergency Stop Button.
9^hXdccZXihedlZgidWdi]bdidgh#
Figure 5.H^YZXdcigdah#
O
N
66
"+" BdYZa<%)*&B[\#H^cXZ*$&%
I]Z[daadl^c\^hVa^hid[XdbbdcYZ[^c^i^dch!iZgbhVcYe]gVhZhjhZYi]gdj\]djii]^hbVcjVaVhi]ZngZaViZ
idi]^hiVWaZhVlVcYlddYldg`^c\^c\ZcZgVa#7ZXdbZ[Vb^a^Vgl^i]i]ZhZiZgbh[dgVhhZbWa^c\!VY_jhi^c\
dgdeZgVi^c\i]^hbVX]^cZ#NdjghV[Zin^hVERY ^bedgiVciidjhVi<g^ooan
Arbor:BZiVah]V[iZmiZcY^c\[gdbi]ZYg^kZ
bZX]Vc^hb!idl]^X]hVlWaVYZ^hbdjciZY#
Bevel Edge Cut:I^ai^c\i]ZVgWdgVcYhVlWaVYZ
idVc Vc\aZ WZilZZc% VcY)*idXjiVWZk"
ZaZYZY\ZdcidVldg`e^ZXZ#
Blade Guard:BZiVadgeaVhi^XhV[ZinYZk^XZi]Vi
bdjcih dkZg i]Z hVl WaVYZ# >ih [jcXi^dc ^h id
egZkZci i]Z deZgVidg[gdbXdb^c\ ^cid XdciVXi
l^i]i]ZhVlWaVYZ#
Crosscut:8jii^c\deZgVi^dc^cl]^X]i]ZXgdhhXji
[ZcXZ^hjhZYidXjiVXgdhhi]Z\gV^c!dgVXgdhh
i]Zh]dgiZhil^Yi]d[i]Zldg`e^ZXZ#
Dado Blade:7aVYZdghZid[WaVYZhi]ViVgZjhZY
idXji\gddkZhVcYgVWWZih#
Dado Cut: 8jii^c\ deZgVi^dc i]Vi jhZh V YVYd
WaVYZidXjiV[aViWdiidbZY\gddkZ^cidi]Z[VXZ
d[i]Zldg`e^ZXZ#
Featherboard: HV[Zin YZk^XZ jhZY id `ZZe i]Z
ldg`e^ZXZV\V^chii]Zg^e[ZcXZVcYV\V^chii]Z
iVWaZhjg[VXZ#
Kerf: I]Z gZhjai^c\ Xji dg \Ve ^c i]Z ldg`e^ZXZ
V[iZg i]Z hVl WaVYZ eVhhZh i]gdj\] Yjg^c\ V
Xjii^c\deZgVi^dc#
Kickback: 6c ZkZci ^c l]^X] i]Z ldg`e^ZXZ ^h
egdeZaaZYWVX` idlVgYhi]ZdeZgVidgViV]^\]
gViZd[heZZY#
Parallel:7Z^c\VcZfjVaY^hiVcXZVeVgiViZkZgn
ed^ci Vadc\ ild \^kZc a^cZh dg eaVcZh# >#Z# i]Z
g^e[ZcXZ[VXZ^heVgVaaZaidi]Z[VXZd[i]ZhVl
WaVYZ#
Non-Through Cut: 6 hVl^c\ deZgVi^dc i]Vi
gZfj^gZhi]ZgZbdkVad[i]ZWaVYZ\jVgYVcYg^k"
^c\`c^[Z#9VYdVcYgVWWZiXjihVgZXdch^YZgZY
Cdc"I]gdj\]8jihWZXVjhZi]ZWaVYZYdZhcdi
egdigjYZVWdkZi]Zide[VXZd[i]ZlddYhidX`#
6alVnhgZbZbWZgidgZ"^chiVaai]ZWaVYZ\jVgY
VcYg^k^c\`c^[ZV[iZgeZg[dgb^c\Vcdc"i]gdj\]
Xji#
Perpendicular:A^cZhdgeaVcZhi]Vi^ciZghZXiVcY
[dgbg^\]iVc\aZh#>#Z#i]ZWaVYZ^heZgeZcY^XjaVg
idi]ZiVWaZhjg[VXZ#
Push Stick: HV[Zin YZk^XZ jhZY id ejh] i]Z
ldg`e^ZXZ i]gdj\] V Xjii^c\ deZgVi^dc# JhZY
bdhid[iZcl]Zcg^eXjii^c\i]^cldg`e^ZXZh#
Rabbet:8jii^c\deZgVi^dci]ViXgZViZhVcA"h]VeZY
X]VccZaVadc\i]ZZY\Zd[i]Zldg`e^ZXZ#
Riving knife:BZiVaeaViZadXViZYWZ]^cYi]Z
WaVYZ#>ibV^ciV^chi]Z`Zg[deZc^c\^ci]ZlddY
l]ZceZg[dgb^c\VXjii^c\deZgVi^dc#
Straightedge:6iddajhZYidX]ZX`i]Z[aVicZhh!
eVgVaaZa^hb!dgXdch^hiZcXnd[Vhjg[VXZh#
Through Cut: 6 hVl^c\ deZgVi^dc ^c l]^X] i]Z
ldg`e^ZXZ^hXdbeaZiZanhVlci]gdj\]#
Rip Cut:8jii^c\deZgVi^dc^cl]^X]i]Zg^e[ZcXZ
^hjhZYidXjil^i]i]Z\gV^c!dgVXgdhhi]Zl^Y"
Zhil^Yi]d[i]Zldg`e^ZXZ#
Glossary Of Terms
BdYZa<%)*&B[\#H^cXZ*$&% ","
0$&+,1('$7$
6+((7
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
02'(/*6/,',1*7$%/(6$:+3
Product Dimensions:
Weight............................................................................................................................................................ 1309 lbs.
Width (side-to-side) x Depth (front-to-back) x Height........................................................... 105-1/2 x 117-1/2 x 49 in.
Footprint (Length x Width)..................................................................................................................... 54-1/2 x 39 in.
Shipping Dimensions:
Type................................................................................................................................................... Wood Slat Crate
Content........................................................................................................................................................... Machine
Weight............................................................................................................................................................ 1680 lbs.
Length x Width x Height..................................................................................................................... 103 x 46 x 43 in.
Electrical:
Power Requirement..................................................................................................... 220V or 440V, 3-Phase, 60 Hz
Minimum Circuit Size.......................................................................................................... 40A at 220V, 20A at 440V
Switch...................................................................................................... Magnetic with Thermal Overload Protection
Switch Voltage..................................................................................................................................................... 220V
Plug Included........................................................................................................................................................... No
Recommended Plug/Outlet Type.......................................................................................... Hardwire Locking Switch
Voltage Conversion Kit.................................................................................................. Requires Part# G440VG0451
Phase Converter................................................................................................................................................ G7979
Motors:
Scoring
Type........................................................................................................................................... TEFC Induction
Horsepower................................................................................................................................................ 1 HP
Voltage................................................................................................................................................ 220/440V
Prewired..................................................................................................................................................... 220V
Phase.................................................................................................................................................... 3-Phase
Amps....................................................................................................................... 3.6A at 220V, 1.8A at 440V
Speed................................................................................................................................................ 3450 RPM
Cycle......................................................................................................................................................... 60 Hz
Number of Speeds............................................................................................................................................ 1
Power Transfer .................................................................................................................................. Belt Drive
Bearings....................................................................................................................... Shielded and Lubricated
Main
Type........................................................................................................................................... TEFC Induction
Horsepower.............................................................................................................................................. 10 HP
Voltage................................................................................................................................................ 220/440V
Prewired..................................................................................................................................................... 220V
Phase.................................................................................................................................................... 3-Phase
Amps......................................................................................................................... 26A at 220V, 13A at 440V
Speed................................................................................................................................................ 3450 RPM
Cycle......................................................................................................................................................... 60 Hz
Number of Speeds............................................................................................................................................ 1
Power Transfer .................................................................................................................................. Belt Drive
Bearings....................................................................................................................... Shielded and Lubricated
Machine Data Sheet
"-" BdYZa<%)*&B[\#H^cXZ*$&%
Main Specifications:
Operation Information
Main Blade Size......................................................................................................................................... 14 in.
Main Arbor Size........................................................................................................................................... 1 in.
Scoring Blade Size................................................................................................................................ 120 mm
Scoring Blade Arbor Size........................................................................................................................ 22 mm
Main Blade Tilt................................................................................................................................... 0 - 45 deg.
Main Blade Speed............................................................................................................................. 4200 RPM
Scoring Blade Tilt.............................................................................................................................. 0 - 45 deg.
Scoring Blade Speed......................................................................................................................... 8000 RPM
Cutting Capacities
Max Depth of Cut At 90 Deg.................................................................................................................. 4-1/2 in.
Max Depth of Cut At 45 Deg.................................................................................................................. 3-1/2 in.
Table With Rip Fence Max Cut Width................................................................................................. 32-5/8 in.
Sliding Table With Cross Fence Max Cut Width.................................................................................. 98-3/8 in.
Sliding Table With Cross Fence Max Cut Length.................................................................................... 126 in.
Miter Fence Cut Width At 45 Deg...................................................................................................... 114-1/2 in.
Table Information
Floor To Table Height.......................................................................................................................... 33-1/2 in.
Table Size Length................................................................................................................................ 39-1/4 in.
Table Size Width........................................................................................................................................ 24 in.
Table Size Thickness............................................................................................................................ 2-1/2 in.
Table Size With Ext Wings Length............................................................................................................ 68 in.
Table Size With Ext Wings Width........................................................................................................ 39-3/4 in.
Table Size With Ext Wings Thickness................................................................................................... 2-1/2 in.
Sliding Table Length.................................................................................................................................. 98 in.
Sliding Table Width.............................................................................................................................. 13-3/4 in.
Sliding Table Thickness............................................................................................................................... 6 in.
Sliding Table T Slot Top Width................................................................................................................. 5/8 in.
Sliding Table T Slot Height....................................................................................................................... 5/8 in.
Sliding Table T Slot Bottom Width......................................................................................................... 1-3/8 in.
Fence Information
Fence Type...................................................................................... Single Lever Locking, Extruded Aluminum
Fence Size Length............................................................................................................................... 39-3/8 in.
Fence Size Width.................................................................................................................................. 2-3/8 in.
Fence Size Height................................................................................................................................. 3-1/2 in.
Fence Stops..................................................................................................................................................... 2
Construction Materials
Table.................................................................................................................................................... Cast Iron
Sliding Table....................................................................................................................................... Aluminum
Base........................................................................................................................................................... Steel
Body Assembly........................................................................................................................................... Steel
Cabinet....................................................................................................................................................... Steel
Trunnions............................................................................................................................................. Cast Iron
Rollers........................................................................................................................................................ Steel
Fence Assembly.................................................................................................................. Extruded Aluminum
Rails............................................................................................................................................ Chromed Steel
Guard....................................................................................................................................................... Plastic
Spindle Bearing Type......................................................................................... Radial Ball Bearing 6206-2RS
Paint........................................................................................................................................... Powder Coated
Other Related Information
No of Dust Ports............................................................................................................................................... 2
Dust Port Size.................................................................................................................................... 2-1/2, 5 in.
BdYZa<%)*&B[\#H^cXZ*$&% "."
Other Specifications:
Country Of Origin ............................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................... 1 Year
Serial Number Location ...................................................................................................................... Grizzly ID Label
Assembly Time .......................................................................................................................................... 2-1/2 hours
Features:
Blade Guard with 2 1/2" Dust Port
5" Main Dust Port
Adjustable Scoring Knife Kerf
Adjustable Riving Knife
Mirco Adjustable, Single Lever Locking Fence
"&%" BdYZa<%)*&B[\#H^cXZ*$&%
MODEL G0451 14" SLIDING TABLE SAW
8jhidbZgHZgk^XZ/*,%*)+".++(IdDgYZg8Vaa/-%%*'("),,,;Vm/-%%)(-"*.%&
SLIDING TABLE
SAW CAPACITIES
G^ee^c\L^Yi]
B^iZg8ji.%§
ejh]Xji
B^iZg8ji)*§
B^iZg8ji)*§
ejh]Xji
8gdhh8ji
[ZcXZcdiZmiZcYZY
B^iZg8ji)*§
ejh]Xji
BdYZa<%)*&B[\#H^cXZ*$&% "&&"
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions.
This manual uses a series of symbols and signal words intended to convey the level of impor-
tance of the safety messages. The progression of symbols is described below. Remember that
safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
WEARING PROPER APPAREL. 9d cdi lZVg
Xadi]^c\! VeeVgZa! dg _ZlZagn i]Vi XVc WZXdbZ
ZciVc\aZY ^c bdk^c\ eVgih# 6alVnh i^Z WVX` dg
XdkZgadc\]V^g# LZVgcdc"ha^e[ddilZVgidVkd^Y
VXX^YZciVaha^ehl]^X]XdjaYXVjhZVadhhd[ldg`"
e^ZXZXdcigda#
HEARING PROTECTION. 6alVnh lZVg ]ZVg"
^c\egdiZXi^dcl]ZcdeZgVi^c\dgdWhZgk^^c\adjY
bVX]^cZgn# :miZcYZY ZmedhjgZ id i]^h cd^hZ
l^i]dji]ZVg^c\egdiZXi^dcXVc XVjhZ eZgbVcZci
]ZVg^c\adhh#
MENTAL ALERTNESS. 7Z bZciVaan VaZgi l]Zc
gjcc^c\ bVX]^cZgn# CZkZg deZgViZ jcYZg i]Z
^c[ajZcXZd[Ygj\hdgVaXd]da!l]Zci^gZY!dgl]Zc
Y^higVXiZY#
OWNER’S MANUAL. GZVY VcY jcYZghiVcY
i]^h dlcZg»h bVcjVa 7:;DG: jh^c\ bVX]^cZ#
JcigV^cZYjhZghXVcWZhZg^djhan]jgi#
EYE PROTECTION.6alVnhlZVg6CH>"VeegdkZY
hV[Zin\aVhhZhdgV[VXZh]^ZaYl]ZcdeZgVi^c\dg
dWhZgk^c\ bVX]^cZgn id gZYjXZ i]Z g^h` d[ ZnZ
^c_jgndgWa^cYcZhh[gdb[an^c\eVgi^XaZh#:kZgnYVn
ZnZ\aVhhZhVgZcdiVeegdkZYhV[Zin\aVhhZh#
HAZARDOUS DUST. 9jhi XgZViZY l]^aZ jh^c\
bVX]^cZgn bVn XVjhZ XVcXZg! W^gi] YZ[ZXih! dg
adc\"iZgb gZhe^gVidgn YVbV\Z# 7Z VlVgZ d[ Yjhi
]VoVgYhVhhdX^ViZYl^i]ZVX]ldg`e^ZXZbViZg^Va!
VcYValVnhlZVgVC>DH="VeegdkZYgZhe^gVidgid
gZYjXZndjgg^h`#
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
This symbol is used to alert the user to useful information about
proper operation of the machine.
NOTICE
Safety Instructions for Machinery
SECTION 1: SAFETY
"&'" BdYZa<%)*&B[\#H^cXZ*$&%
DISCONNECTING POWER SUPPLY.6alVnhY^h"
XdccZXi bVX]^cZ [gdb edlZg hjeean WZ[dgZ hZg"
k^X^c\! VY_jhi^c\! dg X]Vc\^c\ Xjii^c\ iddah W^ih!
WaVYZh!XjiiZgh! ZiX## BV`ZhjgZ hl^iX] ^h^cD;;
edh^i^dcWZ[dgZgZXdccZXi^c\idVkd^YVcjcZmeZXi"
ZYdgjc^ciZci^dcVahiVgi#
APPROVED OPERATION. JcigV^cZY deZgVidgh
XVc WZ hZg^djhan ]jgi Wn bVX]^cZgn# Dcan Vaadl
igV^cZY dg egdeZgan hjeZgk^hZY eZdeaZ id jhZ
bVX]^cZ# L]Zc bVX]^cZ ^h cdi WZ^c\ jhZY! Y^h"
XdccZXi edlZg! gZbdkZ hl^iX] `Znh! dg adX`"dji
bVX]^cZidegZkZcijcVji]dg^oZYjhZ·ZheZX^Vaan
VgdjcYX]^aYgZc#BV`Zldg`h]de`^Yegdd[
DANGEROUS ENVIRONMENTS. 9d cdi jhZ
bVX]^cZgn ^c lZi dg gV^cn adXVi^dch! XajiiZgZY
VgZVh! VgdjcY [aVbbVWaZh! dg ^c eddgan"a^i VgZVh#
@ZZe ldg` VgZV XaZVc! Ygn! VcY lZaa"a^\]iZY id
b^c^b^oZg^h`d[^c_jgn#
ONLY USE AS INTENDED. Dcan jhZ bVX]^cZ
[dg ^ih ^ciZcYZY ejgedhZ# CZkZg bdY^[n dg VaiZg
bVX]^cZ[dgVejgedhZcdi^ciZcYZYWni]ZbVcj"
[VXijgZgdghZg^djh^c_jgnbVngZhjai
USE RECOMMENDED ACCESSORIES.8dchjai
i]^hdlcZg»hbVcjVadgi]ZbVcj[VXijgZg[dggZX"
dbbZcYZY VXXZhhdg^Zh# Jh^c\ ^begdeZg VXXZh"
hdg^Zhl^aa^cXgZVhZi]Zg^h`d[hZg^djh^c_jgn#
CHILDREN & BYSTANDERS. @ZZe X]^aYgZc
VcYWnhiVcYZghVhV[ZY^hiVcXZVlVn[gdbldg`
VgZV#Hidejh^c\bVX]^cZ^[X]^aYgZcdgWnhiVcY"
ZghWZXdbZVY^higVXi^dc#
REMOVE ADJUSTING TOOLS. CZkZg aZVkZ
VY_jhibZciiddah!X]jX``Znh!lgZcX]Zh!ZiX#^cdg
dcbVX]^cZ·ZheZX^VaancZVgbdk^c\eVgih#KZg^[n
gZbdkVaWZ[dgZhiVgi^c\
SECURING WORKPIECE. L]Zc gZfj^gZY! jhZ
XaVbehdgk^hZhidhZXjgZ ldg`e^ZXZ# 6 hZXjgZY
ldg`e^ZXZegdiZXih]VcYhVcY[gZZhWdi]d[i]Zb
iddeZgViZi]ZbVX]^cZ#
FEED DIRECTION.JcaZhhdi]Zgl^hZcdiZY![ZZY
ldg` V\V^chi i]Z gdiVi^dc d[ WaVYZh dg XjiiZgh#
;ZZY^c\^ci]ZhVbZY^gZXi^dcd[gdiVi^dcbVnejaa
ndjg]VcY^cidi]ZXji#
FORCING MACHINERY.9dcdi[dgXZbVX]^cZ#
>il^aa Yd i]Z_dWhV[Zg VcY WZiiZg Vii]ZgViZ [dg
l]^X]^ilVhYZh^\cZY#
GUARDS & COVERS. <jVgYh VcY XdkZgh XVc
egdiZXi ndj [gdb VXX^YZciVa XdciVXi l^i] bdk^c\
eVgih dg [an^c\ YZWg^h# BV`Z hjgZ i]Zn VgZ egde"
Zgan^chiVaaZY!jcYVbV\ZY!VcYldg`^c\XdggZXian
WZ[dgZjh^c\bVX]^cZ#
NEVER STAND ON MACHINE.HZg^djh^c_jgndg
VXX^YZciVa XdciVXi l^i] Xjii^c\ idda bVn dXXjg ^[
bVX]^cZ^hi^eeZY#BVX]^cZbVnWZYVbV\ZY#
STABLE MACHINE. JcZmeZXiZYbdkZbZciYjg"
^c\deZgVi^dch\gZVian^cXgZVhZhi]Zg^h`d[^c_jgn
VcY adhh d[ Xdcigda# KZg^[n bVX]^cZh VgZ hiVWaZ$
hZXjgZ VcY bdW^aZ WVhZh ^[ jhZY VgZ adX`ZY
WZ[dgZhiVgi^c\#
AWKWARD POSITIONS. @ZZe egdeZg [ddi^c\
VcYWVaVcXZViVaai^bZhl]ZcdeZgVi^c\bVX]^cZ#
9dcdidkZggZVX]6kd^YVl`lVgY]VcYedh^i^dch
i]Vi bV`Z ldg`e^ZXZ Xdcigda Y^[[^Xjai dg ^cXgZVhZ
i]Zg^h`d[VXX^YZciVa^c_jgn#
UNATTENDED OPERATION. CZkZg aZVkZ
bVX]^cZgjcc^c\l]^aZjcViiZcYZY#IjgcbVX]^cZ
OFFVcYZchjgZVaabdk^c\eVgihXdbeaZiZanhide
WZ[dgZlVa`^c\VlVn#
MAINTAIN WITH CARE.;daadlVaabV^ciZcVcXZ
^chigjXi^dch VcY ajWg^XVi^dc hX]ZYjaZh id `ZZe
bVX]^cZ^c\ddYldg`^c\XdcY^i^dc#6c^begdeZgan
bV^ciV^cZYbVX]^cZbVn^cXgZVhZi]Zg^h`d[hZg^"
djh^c_jgn#
CHECK DAMAGED PARTS. GZ\jaVgan ^cheZXi
bVX]^cZ [dg YVbV\ZY eVgih! addhZ Wdaih! b^h"
VY_jhiZY dg b^h"Va^\cZY eVgih! W^cY^c\! dg Vcn
di]Zg XdcY^i^dch i]Vi bVn V[[ZXi hV[Z deZgVi^dc#
6alVnhgZeV^gdggZeaVXZYVbV\ZYdgb^h"VY_jhi"
ZYeVgihWZ[dgZdeZgVi^c\bVX]^cZ#
EXPERIENCING DIFFICULTIES. >[ Vi Vcn i^bZ
ndj VgZ ZmeZg^ZcX^c\ Y^[[^Xjai^Zh eZg[dgb^c\ i]Z
^ciZcYZYdeZgVi^dc!hidejh^c\i]ZbVX]^cZ
8dciVXi djg IZX]c^XVa Hjeedgi 9ZeVgibZci Vi
*,%*)+".++(#
BdYZa<%)*&B[\#H^cXZ*$&% "&("
HAND POSITIONING.CZkZgejgedhZanidjX]V
hVl WaVYZ Yjg^c\ deZgVi^dc# 6alVnh `ZZe ]VcYh$
[^c\Zgh dji d[ i]Z WaVYZ eVi]0 eaVXZ i]Zb l]ZgZ
i]ZnXVccdiha^e^cidi]ZWaVYZVXX^YZciVaan#CZkZg
gZVX]VgdjcY!WZ]^cY!dgdkZgi]ZWaVYZ#IdjX]^c\
Vhe^cc^c\hVlWaVYZl^aaXVjhZhZg^djhaVXZgVi^dc
dgVbejiVi^dc^c_jg^Zh#
BLADE GUARD. JhZ i]Z WaVYZ \jVgY [dg Vaa
¸i]gdj\]Xjih¹[dgl]^X]^iXVcWZjhZY#6i]gdj\]
Xji^hVcdeZgVi^dcl]ZgZi]ZWaVYZXjihXdbeaZiZ"
an i]gdj\] i]Z ide d[ i]Z ldg`e^ZXZ# BV`Z hjgZ
i]ZWaVYZ\jVgY^h^chiVaaZYVcYVY_jhiZYXdggZXian0
egdbeiangZeV^gdggZeaVXZ^i^[YVbV\ZY#6alVnh
gZ"^chiVaaWaVYZ\jVgY^bbZY^ViZanV[iZgdeZgVi^dch
i]Vi gZfj^gZ ^ih gZbdkVa# DeZgVi^c\ hVl l^i] i]Z
WaVYZ\jVgYgZbdkZY\gZVian^cXgZVhZhi]Zg^h`d[
hZkZgZaVXZgVi^dcdgVbejiVi^dc^c_jg^Zh[gdbVXX^"
YZciVaWaVYZXdciVXi#
RIVING KNIFE. JhZ i]Z g^k^c\ `c^[Z [dg Vaa ¸cdc"
i]gdj\]Xjih¹[dgl]^X]^iXVcWZjhZY#6cdc"
i]gdj\]Xji^hVcdeZgVi^dcl]ZgZi]ZWaVYZYdZh
cdi Xji i]gdj\] i]Z ide d[ i]Z ldg`e^ZXZ# BV`Z
hjgZi]Zg^k^c\`c^[Z^hVa^\cZYVcYedh^i^dcZYXdg"
gZXian0VcYegdbeiangZeV^gdggZeaVXZ^i^[YVbV\ZY#
Jh^c\i]Zg^k^c\`c^[Z^cXdggZXianl^aa^cXgZVhZi]Z
g^h`d[`^X`WVX`dgVXX^YZciVaWaVYZXdciVXi#
KICKBACK.@^X`WVX`dXXjghl]Zci]ZhVlWaVYZ
Z_ZXih i]Z ldg`e^ZXZ WVX` idlVgY i]Z deZgVidg#
@cdl]dlidgZYjXZi]Zg^h`d[`^X`WVX`!VcYaZVgc
]dlidegdiZXindjghZa[^[^iYdZhdXXjg#
FEEDING WORKPIECE. ;ZZY^c\ i]Z ldg`e^ZXZ
^cXdggZXianl^aa^cXgZVhZg^h`d[`^X`WVX`#CZkZg
hiVgii]ZhVll^i]Vldg`e^ZXZidjX]^c\i]ZWaVYZ0
Vaadli]ZWaVYZidgZVX][jaaheZZYWZ[dgZXjii^c\#
Dcan [ZZY i]Z ldg`e^ZXZ V\V^chi i]Z Y^gZXi^dc d[
WaVYZ gdiVi^dc# 6alVnh jhZ hdbZ ineZ d[ \j^YZ
[ZcXZ! b^iZg \Vj\Z! ha^Y^c\ iVWaZ dg haZY! ZiX# id
[ZZYi]Zldg`e^ZXZ^cVhigV^\]ia^cZ#CZkZgWVX`V
ldg`e^ZXZdjid[VXjidgignidbdkZ^iWVX`lVgYh
dgh^YZlVnhV[iZghiVgi^c\VXji#;ZZYXjihVaai]Z
lVn i]gdj\] id XdbeaZi^dc# CZkZg eZg[dgb Vcn
deZgVi^dc¸[gZZ]VcY¹bV`^c\VXjil^i]djijh^c\V
[ZcXZ!b^iZg\Vj\Z!dgdi]Zg\j^YZ#
FENCE. BV`Z hjgZ i]Z [ZcXZ gZbV^ch egdeZgan
VY_jhiZYVcYeVgVaaZa l^i] i]ZWaVYZ#6alVnh adX`
i]Z[ZcXZ^ceaVXZWZ[dgZjh^c\#Jh^c\dgVY_jhi^c\
i]Z[ZcXZ^cXdggZXianl^aa^cXgZVhZg^h`d[`^X`WVX`#
PUSH STICKS/BLOCKS.JhZejh]hi^X`hdgejh]
WadX`hl]ZcZkZgedhh^WaZid`ZZendjg]VcYh[Vg"
i]ZgVlVn[gdbi]ZWaVYZl]^aZXjii^c\0^ci]ZZkZci
d[VcVXX^YZcii]ZhZYZk^XZhl^aad[iZciV`ZYVb"
V\Zi]VildjaY]VkZ]VeeZcZYid]VcYh$[^c\Zgh#
CUT-OFF PIECES.CZkZgjhZndjg]VcYhidbdkZ
Xji"d[[hVlVn[gdbi]ZWaVYZl]^aZi]ZhVl^hgjc"
c^c\# >[ V Xji"d[[ WZXdbZh igVeeZY WZilZZc i]Z
WaVYZVcYiVWaZ^chZgi!ijgci]ZhVlOFFVcYVaadl
i]ZWaVYZidXdbeaZiZanhideWZ[dgZgZbdk^c\^i#
BLADE ADJUSTMENTS. 6Y_jhi^c\ i]Z WaVYZ
]Z^\]idgi^aiYjg^c\deZgVi^dc^cXgZVhZhi]Zg^h`d[
XgVh]^c\ i]Z WaVYZ VcY hZcY^c\ bZiVa [gV\bZcih
[an^c\l^i]YZVYan[dgXZVii]ZdeZgVidgdgWnhiVcY"
Zgh#DcanVY_jhii]ZWaVYZ]Z^\]iVcYi^ail]Zci]Z
WaVYZ^hXdbeaZiZanhideeZYVcYi]ZhVl^hOFF#
CHANGING BLADES. 6alVnh Y^hXdccZXi edlZg
WZ[dgZ X]Vc\^c\ WaVYZh# 8]Vc\^c\ WaVYZh l]^aZ
i]Z hVl ^h XdccZXiZY id edlZg \gZVian ^cXgZVhZh
i]Z^c_jgng^h`^[hVl^hVXX^YZciVaanedlZgZYje#
DAMAGED SAW BLADES.CZkZgjhZWaVYZh
i]Vi ]VkZ WZZc YgdeeZY dg di]Zgl^hZ YVbV\ZY#
9VbV\ZYWaVYZhXVc[anVeVgiVcYhig^`Zi]ZdeZg"
Vidgl^i]h]VgYhd[bZiVa#
DADO AND RABBET OPERATIONS. 9D CDI
ViiZbei YVYd dg gVWWZi^c\ deZgVi^dch l^i]dji
[^ghi gZVY^c\ i]dhZ hZXi^dch ^c i]^h bVcjVa# 9VYd
VcYgVWWZi^c\deZgVi^dchgZfj^gZheZX^VaViiZci^dc
WZXVjhZ i]Zn bjhi WZ eZg[dgbZY l^i] i]Z WaVYZ
\jVgYgZbdkZY#
CUTTING CORRECT MATERIAL.CZkZgXji
bViZg^Vahcdi^ciZcYZY[dgi]^hhVl0dcanXjicVijgVa
VcYbVc"bVYZlddY egdYjXih!aVb^cViZXdkZgZY
lddYegdYjXih!VcYhdbZeaVhi^Xh#8jii^c\bZiVa!
\aVhh!hidcZ!i^aZ!ZiX#^cXgZVhZhi]Zg^h`d[deZgVidg
^c_jgnYjZid`^X`WVX`dg[an^c\eVgi^XaZh#
Additional Safety for Table Saws
"&)" BdYZa<%)*&B[\#H^cXZ*$&%
SECTION 2: POWER SUPPLY
Availability
7Z[dgZ^chiVaa^c\i]ZbVX]^cZ!Xdch^YZgi]ZVkV^a"
VW^a^inVcYegdm^b^ind[i]ZgZfj^gZYedlZghjeean
X^gXj^i# >[ Vc Zm^hi^c\ X^gXj^i YdZh cdi bZZi i]Z
gZfj^gZbZcih[dgi]^hbVX]^cZ!VcZlX^gXj^ibjhi
WZ ^chiVaaZY# Id b^c^b^oZ i]Z g^h` d[ ZaZXigdXj"
i^dc![^gZ!dgZfj^ebZciYVbV\Z!^chiVaaVi^dcldg
`
VcYZaZXig^XVal^g^c\bjhiWZYdcZWnVfjVa^[^ZY
ZaZXig^X^Vc^cVXXdgYVcXZl^i]VaaVeea^XVWaZXdYZh
VcYhiVcYVgYh#
Electrocution, fire, or
equipment damage may
occur if machine is not
correctly grounded and
connected to the power
supply.
Full-Load Current Rating
I]Z [jaa"adVY XjggZci gVi^c\ ^h i]Z VbeZgV\Z V
bVX]^cZYgVlhVi&%%d[i]ZgViZYdjiejiedlZg#
Dc bVX]^cZh l^i] bjai^eaZ bdidgh! i]^h ^h i]Z
VbeZgV\ZYgVlcWni]ZaVg\Zhibdidgdghjbd[Vaa
bdidghVcYZaZXig^XVa YZk^XZhi]Vib^\]ideZgViZ
VidcZi^bZYjg^c\cdgbVadeZgVi^dch#
Full-Load Current Rating at 220V .. 29.6 Amps
Full-Load Current Rating at 440V .. 14.8 Amps
I]Z[jaa"adVYXjggZci^hcdii]ZbVm^bjbVbdjci
d[Vbehi]Vii]ZbVX]^cZl^aaYgVl#>[i]ZbVX]^cZ
^hdkZgadVYZY!^il^aaYgVlVYY^i^dcVaVbehWZndcY
i]Z[jaa"adVYgVi^c\#
>[i]ZbVX]^cZ^hdkZgadVYZY[dgVhj[[^X^ZciaZc\i]
d[i^bZ!YVbV\Z!dkZg]ZVi^c\!dg[^gZbVngZhjai·
ZheZX^Vaan ^[ XdccZXiZY id Vc jcYZgh^oZY X^gXj^i#
IdgZYjXZ i]Z g^h` d[i]ZhZ]VoVgYh!Vkd^Y dkZg"
adVY^c\ i]Z bVX]^cZ Yjg^c\ deZgVi^dc VcY bV`Z
hjgZ^i^hXdccZXiZYidVedlZghjeeanX^gXj^ii]Vi
bZZihi]ZgZfj^gZbZcih^ci]Z[daadl^c\hZXi^dc#
Circuit Requirements for 220V
I]^h bVX]^cZ ^h egZl^gZY id deZgViZ dc V ''%K
edlZghjeeanX^gXj^ii]Vi]VhVkZg^[^ZY\gdjcYVcY
bZZihi]Z[daadl^c\gZfj^gZbZcih/
Nominal Voltage .............................. 220V/240V
Cycle..........................................................60 Hz
Phase.................................................... 3-Phase
Power Supply Circuit ......................... 40 Amps
Circuit Requirements for 440V
I]^h bVX]^cZ XVc WZ XdckZgiZY id deZgViZ dc V
))%KedlZghjeeangZ[ZgidVoltage Conversion
^chigjXi^dchi]Vi]VhVkZg^[^ZY\gdjcYVcYbZZih
i]Z[daadl^c\gZfj^gZbZcih/
Nominal Voltage .............................. 440V/480V
Cycle..........................................................60 Hz
Phase.................................................... 3-Phase
Power Supply Circuit ......................... 20 Amps
For your own safety and protection of
property, consult a qualified electrician if
you are unsure about wiring practices or
electrical codes in your area.
Note: The circuit requirements listed in this man
-
ual apply to a dedicated circuit—where only on
e
machine will be running at a time. If this machin
e
will be connected to a shared circuit where mul
-
tiple machines will be running at the same time,
consult a qualified electrician to ensure that th
e
circuit is properly sized for safe operation.
6 edlZg hjeean X^gXj^i ^cXajYZh Vaa ZaZXig^XVa
Zfj^ebZciWZilZZci]ZWgZV`ZgWdmdg[jhZeVcZa
^ci]ZWj^aY^c\VcYi]ZbVX]^cZ#I]ZedlZghje"
eanX^gXj^ijhZY[dgi]^hbVX]^cZbjhiWZh^oZYid
hV[Zan]VcYaZi]Z[jaa"adVYXjggZciYgVlc[gdbi]Z
bVX]^cZ [dg Vc ZmiZcYZY eZg^dY d[ i^bZ# >[ i]^h
bVX]^cZ ^h XdccZXiZY id V X^gXj^i egdiZXiZY Wn
[jhZh!jhZVi^bZYZaVn[jhZbVg`ZY9#
Circuit Information
BdYZa<%)*&B[\#H^cXZ*$&% "&*"
Extension Cords
H^cXZ i]^h bVX]^cZ bjhi WZ eZgbVcZcian Xdc"
cZXiZY id i]Z edlZg hjeean! Vc ZmiZch^dc XdgY
XVccdiWZjhZY#
Connection Type
Figure 6.Ine^XVahZijed[VeZgbVcZcian
XdccZXiZYbVX]^cZ#
EdlZg
HdjgXZ
AdX`^c\
9^hXdccZXiHl^iX]
BVX]^cZ
<gdjcY <gdjcY
8dcYj^i8dcYj^i
6 edlZg XdgY ^h cdi ^cXajYZY! WZXVjhZ i]^h
bVX]^cZ bjhi WZ eZgbVcZcian XdccZXiZY id i]Z
edlZg hjeean# 6 Y^hXdccZXi^c\ bZVch! hjX] Vh
V adX`^c\ hl^iX] hZZ Figure WZadl! bjhi WZ
egdk^YZYidVaadli]ZbVX]^cZidWZY^hXdccZXiZY
^hdaViZY [gdb i]Z edlZg hjeean l]Zc gZfj^gZY#
I]^h^chiVaaVi^dcbjhiWZeZg[dgbZYWnVfjVa^[^ZY
ZaZXig^X^Vc^cVXXdgYVcXZl^i]VaaVeea^XVWaZZaZX"
ig^XVaXdYZhVcYdgY^cVcXZh#
Serious injury could occur if you connect
the machine to power before completing the
setup process. DO NOT connect to power
until instructed later in this manual.
Grounding Instructions
>c i]Z ZkZci d[ V bVa[jcXi^dc dg WgZV`Ydlc!
\gdjcY^c\ egdk^YZh V eVi] d[ aZVhi gZh^hiVcXZ
[dgZaZXig^XVaXjggZciidgZYjXZi]Zg^h`d[ZaZXig^X
h]dX`# 6 eZgbVcZcian XdccZXiZY bVX]^cZ bjhi
WZXdccZXiZYidV\gdjcYZYbZiVaeZgbVcZcil^g"
^c\hnhiZb0dgidVhnhiZb]Vk^c\VcZfj^ebZci"
\gdjcY^c\XdcYjXidg#6aa\gdjcYhbjhiWZkZg^[^ZY
VcY gViZY [dg i]Z ZaZXig^XVa gZfj^gZbZcih d[ i]Z
bVX]^cZ# >begdeZg \gdjcY^c\ XVc ^cXgZVhZ i]Z
g^h`d[ZaZXig^Xh]dX`
"&+" BdYZa<%)*&B[\#H^cXZ*$&%
3. Ejaai]Z[jhZi]Vi^h^ci]Z¸''%¹hadiVcYejh]
^i^cidi]Z¸))%¹hadihZZFigure 8#
4. GZbdkZi]ZbV^cbdidgdkZgadVYgZaVn hZZ
Figure 9 VcY gZeaVXZ ^i l^i] i]Z dkZgadVY
gZaVn[gdbi]Z))%KXdckZgh^dc`^i#Ijgci]Z
Y^Vadci]ZbV^cbdidgdkZgadVYgZaVnid.6#
5. Dci]ZhXdg^c\bdidgdkZgadVYgZaVn!X]Vc\Z
i]ZY^VahZii^c\id'#+6#
6. DeZci]ZbdidgXVW^cZiYddgVcYgZbdkZi]Z
bdidgl^g^c\XdkZgh[gdbi]ZbV^cbdidgVcY
i]ZhXdg^c\bdidghZZFigure 10#
7. GZ"l^gZ i]Z bdidgh Vh h]dlc dc i]Z Y^V"
\gVbh i]Vi VgZ eaVXZY dc i]Z ^ch^YZ d[ i]Z
bdidgl^g^c\XdkZgh#
I]ZBdYZa<%)*&XVcWZgZl^gZY[dg))%KdeZgV"
i^dc#I]ZcZXZhhVgneVgih[dgi]^hegdXZYjgZXVc
WZejgX]VhZYWnXVaa^c\djgXjhidbZghZgk^XZVi
-%%*'("),,,VcYdgYZg^c\eVgiE%)*&%%&+#
I]^hgZl^g^c\_dWbjhiWZ^cheZXiZYWnVcZaZXig^"
X^VcdgfjVa^[^ZYhZgk^XZeZghdccZaWZ[dgZi]ZhVl
^hXdccZXiZYidi]ZedlZghdjgXZ#6ahd!i]Zbdidgh
XVcWZVXXZhhZYZVh^Zg[dggZl^g^c\^[i]ZWaVYZ^h
bdkZYid%ß.%ßidiVWaZWZ[dgZWZ\^cc^c\#
To rewire the machine for 440V operation:
1. 9>H8DCC:8IH6L;GDBEDL:G
2. DeZci]ZZaZXig^XVaeVcZaVcYadXViZi]Zkdai"
V\ZigVch[dgbZgh]dlc^cFigure 7#
Voltage Conversion
Figure 7.>ch^YZk^Zld[i]ZXdcigdaeVcZa#
:aZXig^XVa
6XXZhh
EVcZa
KdaiV\ZIgVch[dgbZg
BV^cBdidg
DkZgadVYGZaVn
HXdg^c\Bdidg
DkZgadVYGZaVn
Figure 8. ;jhZ^chiVaaZYVii]Z''%KadXVi^dc#
;jhZ
Figure 9.BdidgdkZgadVYgZaVnh#
BV^cBdidg
DkZgadVYGZaVn
HXdg^c\Bdidg
DkZgadVYGZaVn
Figure 10.BdidgadXVi^dch#
HXdg^c\
Bdidg
BV^c
Bdidg
BdYZa<%)*&B[\#H^cXZ*$&% "&,"
SECTION 3: SETUP
I]Z [daadl^c\ VgZ cZZYZY id XdbeaZiZ i]Z hZije
egdXZhh!WjiVgZcdi^cXajYZYl^i]ndjgbVX]^cZ#
Description Qty
6cdi]ZgEZghdc###########################################&
HV[Zin<aVhhZh#################&[dg:VX]EZghdc
8aZVcZg$9Z\gZVhZg######################6hCZZYZY
9^hedhVWaZH]deGV\h################6hCZZYZY
EdlZgA^[i^c\:fj^ebZci
GViZY[dgViaZVhi&*%%aWh########################&
A^[i^c\HigVeh
GViZY[dgViaZVhi&*%%aWh#ZVX]##############'
HigV^\]iZY\Z)dgadc\Zg###########################&
BV^c7aVYZ&'dg&)##################################&
E]^aa^ehHXgZlYg^kZg'################################&
=ZmLgZcX]Zh(!)!+!-bb########## &:VX]
LgZcX]ZhdgHdX`Zih&+&-bb##### &:VX]
9jhi8daaZXi^dcHnhiZb###############################&
*9jhi=dhZaZc\i]VhcZZYZY################&
*=dhZ8aVbe############################################'
'9jhi=dhZaZc\i]VhcZZYZY#############&
EdlZg8dgYaZc\i]VhcZZYZY##################&
EdlZg9^hXdccZXi7dml$AdX`^c\Hl^iX]###&
Needed for Setup
This machine presents
serious injury hazards
to untrained users. Read
through this entire manual
to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses dur-
ing the entire setup pro-
cess!
Ndjg bVX]^cZ lVh XVgZ[jaan eVX`V\ZY [dg hV[Z
igVchedgiVi^dc# GZbdkZ i]Z eVX`V\^c\ bViZg^Vah
[gdb VgdjcY ndjg bVX]^cZ VcY ^cheZXi ^i# >[ ndj
Y^hXdkZgVcnYVbV\Z! please call us immediatel
y
at (570) 546-9663for advice.
HVkZi]ZXdciV^cZghVcYVaaeVX`^c\bViZg^Vah[dg
edhh^WaZ ^cheZXi^dc Wn i]Z XVgg^Zg dg ^ih V\Zci#
Otherwise, filing a freight claim can be difficult.
L]ZcndjVgZXdbeaZiZanhVi^h[^ZYl^i]i]ZXdcY^"
i^dcd[
n
djgh]^ebZci!^ckZcidg
n
i]ZXdciZcih#
Unpacking
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials unpacked with this
machine. Discard immediately.
The Model G0451 is a heavy
machine that weighs over
1300 lbs. Serious personal
injury may occur if safe
moving methods are not
followed. To be safe, you
will need assistance and
power equipment when
moving the shipping crate
and machine.
"&-" BdYZa<%)*&B[\#H^cXZ*$&%
Hardware Recognition Chart
Other manuals for G0451
2
Table of contents
Other Grizzly Saw manuals
Grizzly
Grizzly G8993 User manual
Grizzly
Grizzly G1019Z User manual
Grizzly
Grizzly G0461 User manual
Grizzly
Grizzly G0503 User manual
Grizzly
Grizzly Extreme Series User manual
Grizzly
Grizzly T32304 User manual
Grizzly
Grizzly g0531b User manual
Grizzly
Grizzly G0502 User manual
Grizzly
Grizzly G0621 User manual
Grizzly
Grizzly G0806 User manual
Grizzly
Grizzly G0444 User manual
Grizzly
Grizzly G5787 User manual
Grizzly
Grizzly EXTREME G0513X2 User manual
Grizzly
Grizzly G0636X User manual
Grizzly
Grizzly G0899 User manual
Grizzly
Grizzly G0566 Instruction Manual
Grizzly
Grizzly G0502 User manual
Grizzly
Grizzly G0901 User manual
Grizzly
Grizzly G5787 User manual
Grizzly
Grizzly G0501 User manual
