Grizzly G0690 User manual
MODEL G0690/G0691
10" CABINET TABLE SAW
with RIVING KNIFE
OWNER'S MANUAL
Model G0691
Model G0690
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
This manual provides critical safety instructions on the proper setup,
operation, maintenance, and service of this machine/tool. Save this
document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual
may result in fire or serious personal injury—including amputation,
electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use.
This responsibility includes but is not limited to proper installation in
a safe environment, personnel training and usage authorization,
proper inspection and maintenance, manual availability and compre-
hension, application of safety devices, cutting/sanding/grinding tool
integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage
from negligence, improper training, machine modifications or misuse.
3OMEDUSTCREATEDBYPOWERSANDINGSAWINGGRINDINGDRILLINGAND
OTHERCONSTRUCTIONACTIVITIESCONTAINSCHEMICALSKNOWNTOTHE3TATE
OF#ALIFORNIATOCAUSECANCERBIRTHDEFECTSOROTHERREPRODUCTIVE
HARM3OMEEXAMPLESOFTHESECHEMICALSARE
s ,EADFROMLEADBASEDPAINTS
s #RYSTALLINESILICAFROMBRICKSCEMENTANDOTHERMASONRYPRODUCTS
s !RSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER
9OURRISKFROMTHESEEXPOSURESVARIESDEPENDINGONHOWOFTENYOU
DOTHISTYPEOFWORK4OREDUCEYOUREXPOSURETOTHESECHEMICALS
7ORKINAWELLVENTILATEDAREAANDWORKWITHAPPROVEDSAFETYEQUIP
MENTSUCHASTHOSEDUSTMASKSTHATARESPECIALLYDESIGNEDTOFILTER
OUTMICROSCOPICPARTICLES
Table of Contents
INTRODUCTION............................................... 2
SECTION 1: SAFETY..................................... 10
SECTION 2: POWER SUPPLY ...................... 15
SECTION 3: SETUP ....................................... 17
SECTION 4: OPERATIONS ........................... 32
SECTION 5: SHOP MADE SAFETY
ACCESSORIES .............................................. 50
SECTION 6: AFTERMARKET ACCESSORIES
FROM GRIZZLY ............................................. 58
SECTION 7: MAINTENANCE......................... 61
SECTION 8: SERVICE ................................... 63
SECTION 9: WIRING...................................... 74
SECTION 10: PARTS..................................... 76
WARRANTY AND RETURNS ........................ 89
INTRODUCTION
Machine Description
LZ hiVcY WZ]^cY djg bVX]^cZh# >[ ndj ]VkZ
VcnfjZhi^dch dg cZZY]Zae! jhZ i]Z^c[dgbVi^dc
WZadlidXdciVXijh#7Z[dgZXdciVXi^c\!eaZVhZ\Zi
i]ZhZg^Va cjbWZg VcYbVcj[VXijgZ YViZ d[ndjg
bVX]^cZ#I]^hl^aa]Zaejh]Zaendj[VhiZg#
<g^ooanIZX]c^XVaHjeedgi
&'%(AnXdb^c\BVaa8^gXaZ
BjcXn!E6&,,*+
E]dcZ/*,%*)+".++(
:bV^a/iZX]hjeedgi5\g^ooan#Xdb
LZlVcindjg[ZZYWVX`dci]^hbVcjVa#L]ViY^Y
ndj a^`Z VWdji ^i4 L]ZgZ XdjaY ^i WZ ^begdkZY4
EaZVhZiV`ZV[Zlb^cjiZhid\^kZjh[ZZYWVX`#
<g^ooan9dXjbZciVi^dcBVcV\Zg
E#D#7dm'%+.
7Zaa^c\]Vb!L6.-'',"'%+.
:bV^a/bVcjVah5\g^ooan#Xdb
Contact Info
LZVgZegdjYidd[[Zgi]^hbVcjVal^i]ndjgcZl
bVX]^cZ LZkZ bVYZ ZkZgn Z[[dgi id WZ ZmVXi
l^i] i]Z ^chigjXi^dch! heZX^[^XVi^dch! YgVl^c\h!
VcY e]did\gVe]h d[ i]Z bVX]^cZ lZ jhZY l]Zc
lg^i^c\i]^hbVcjVa#=dlZkZg!hdbZi^bZhlZhi^aa
bV`ZVcdXXVh^dcVab^hiV`Z#
6ahd!dl^c\iddjg eda^Xnd[Xdci^cjdjh^begdkZ"
bZci!your machine may not exactly match the
manual#>[ndj[^cYi]^hidWZi]ZXVhZ!VcYi]ZY^["
[ZgZcXZWZilZZci]ZbVcjVaVcYbVX]^cZaZVkZh
ndj ^c YdjWi! X]ZX` djg lZWh^iZ [dg i]Z aViZhi
bVcjVajeYViZdgXVaaiZX]c^XVahjeedgi[dg]Zae#
7Z[dgZXVaa^c\![^cYi]ZbVcj[VXijgZYViZd[ndjg
bVX]^cZWnadd`^c\Vii]ZYViZhiVbeZY^cidi]Z
bVX]^cZ >9 aVWZa hZZ WZadl# I]^h l^aa ]Zae jh
YZiZgb^cZ ^[ i]Z bVcjVa kZgh^dc ndj gZXZ^kZY
bViX]Zhi]ZbVcj[VXijgZYViZd[ndjgbVX]^cZ#
;dgndjgXdckZc^ZcXZ!lZedhiVaaVkV^aVWaZbVc"
jVahVcYbVcjVajeYViZh[dg[gZZdcdjglZWh^iZ
Viwww.grizzly.com#6cnjeYViZhidndjgbdYZa
d[ bVX]^cZ l^aa WZ gZ[aZXiZY ^c i]ZhZ YdXjbZcih
VhhddcVhi]ZnVgZXdbeaZiZ#
BVcj[VXijgZ9ViZ
d[NdjgBVX]^cZ
Manual Accuracy
Figure 3.
Identification
-4- Model G0690/G0691 (Mfg. 11/10+)
The information contained herein is deemed accurate as of 8/16/2011 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3Model G0690
0$&+,1('$7$
6+((7
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
02'(/*+39&$%,1(77$%/(6$::,7+
5,9,1*.1,)(
Product Dimensions:
Weight.............................................................................................................................................................. 507 lbs.
Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 62 x 41 x 40 in.
Footprint (Length x Width)............................................................................................................................ 20 x 20 in.
Shipping Dimensions:
Carton #1
Type.............................................................................................................................. Cardboard/Wood Skids
Content................................................................................................................................................. Machine
Weight.................................................................................................................................................... 463 lbs.
Length x Width x Height............................................................................................................. 33 x 30 x 40 in.
Carton #2
Type................................................................................................................................................... Cardboard
Content..................................................................................................................................................... Fence
Weight...................................................................................................................................................... 27 lbs.
Length x Width x Height............................................................................................................... 42 x 17 x 7 in.
Carton #3
Type................................................................................................................................................... Cardboard
Content....................................................................................................................................................... Rails
Weight...................................................................................................................................................... 49 lbs.
Length x Width x Height................................................................................................................. 68 x 7 x 5 in.
Electrical:
Minimum Circuit Size.............................................................................................................................................. 20A
Switch...................................................................................................... Magnetic with Thermal Overload Protection
Switch Voltage..................................................................................................................................................... 220V
Cord Length......................................................................................................................................................... 6 feet
Cord Gauge................................................................................................................................................... 14 gauge
Plug Included.......................................................................................................................................................... Yes
Included Plug Type.................................................................................................................................... NEMA 6-20
Motors:
Main
Type.................................................................................................................. TEFC Capacitor Start Induction
Horsepower................................................................................................................................................ 3 HP
Voltage....................................................................................................................................................... 220V
Phase....................................................................................................................................................... Single
Amps......................................................................................................................................................... 12.8A
Speed................................................................................................................................................ 3450 RPM
Cycle......................................................................................................................................................... 60 Hz
Number of Speeds............................................................................................................................................ 1
Power Transfer ..................................................................................................................... Triple V-Belt Drive
Bearings....................................................................................................... Shielded and Permanently Sealed
The information contained herein is deemed accurate as of 3/7/2011 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 3Model G0690
Main Specifications:
Blade Information
Maximum Blade Diameter......................................................................................................................... 10 in.
Maximum Width of Dado...................................................................................................................... 13/16 in.
Blade Tilt...................................................................................................................................... Left 0-45 deg.
Arbor Size................................................................................................................................................. 5/8 in.
Arbor Speed...................................................................................................................................... 4300 RPM
Arbor Bearings.......................................................................................... Sealed and Permanently Lubricated
Cutting Capacities
Maximum Depth of Cut At 90 Degrees.................................................................................................. 3-1/8 in.
Maximum Depth of Cut At 45 Degrees................................................................................................ 2-3/16 in.
Maximum Rip To Right of Blade-Standard.......................................................................................... 29-1/2 in.
Maximum Rip To Left of Blade.................................................................................................................. 12 in.
Table Information
Floor To Table Height................................................................................................................................ 34 in.
Table Size Width........................................................................................................................................ 20 in.
Table Size Depth....................................................................................................................................... 27 in.
Table Size Thickness............................................................................................................................ 1-1/2 in.
Table Size With Extension Wings Width.................................................................................................... 40 in.
Table Size With Extension Wings Depth................................................................................................... 27 in.
Table Size With Extension Wings Thickness......................................................................................... 1-1/2 in.
Distance Front of Table To Center Of Blade....................................................................................... 17-1/4 in.
Distance Front of Table To Blade At Maximum Cut............................................................................ 12-1/4 in.
Fence Information
Fence Type.................................................................................... Camlock T-Shaped Fence with HDPE Face
Fence Size Length..................................................................................................................................... 48 in.
Fence Size Width.................................................................................................................................. 4-1/8 in.
Fence Size Height................................................................................................................................. 2-1/2 in.
Fence Rail Type................................................................................................................. Square Steel Tubing
Fence Rail Length...................................................................................................................................... 62 in.
Fence Rail Width................................................................................................................................... 2-3/4 in.
Fence Rail Height........................................................................................................................................ 2 in.
Miter Gauge Information
Miter Gauge Slot Type.............................................................................................................................. T-Slot
Miter Gauge Slot Size Width..................................................................................................................... 3/4 in.
Miter Gauge Slot Size Height................................................................................................................... 3/8 in.
Construction
Table....................................................................................................................... Precision Ground Cast Iron
Wings...................................................................................................................... Precision Ground Cast Iron
Trunnions............................................................................................................................................. Cast Iron
Base....................................................................................................................................... Pre-Formed Steel
Body Assembly...................................................................................................................... Pre-Formed Steel
Fence Assembly................................................................................................... Steel with HDPE Side Plates
Rails........................................................................................................................................................... Steel
Miter Guage.................................................................................................................. Cast Iron with Steel Bar
Guard....................................................................................................................................... Steel and Plastic
Other Related Information
Paint........................................................................................................................................... Powder Coated
Number of Dust Ports....................................................................................................................................... 1
Dust Port Size.............................................................................................................................................. 4 in.
The information contained herein is deemed accurate as of 3/7/2011 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 3 OF 3Model G0690
Other Specifications:
ISO Factory .................................................................................................................................................. ISO 9001
Country Of Origin ............................................................................................................................................... China
Serial Number Location ............................................................................................................... ID Label on Cabinet
Assembly Time ................................................................................................................................................. 1 Hour
Features:
Leeson Motor
Precision Ground Cast Iron Table
Cast Iron Trunnions
4" Dust Port
T-Slot Miter Gauge
Riving Knife and Blade Guard
Camlock T-Shaped Fence with HDPE Face
Quick-Release Device for Changing Guard/Riving Knife
Powder Coated Paint
Standard and Dado Table Inserts
Quick Release Riving Knife
Quick Release Motor Guard
Quick Release Splitter Assembly
Easy Glide Fence System
Knurled Knobs for Adjusting Fence
Nylon Runners Inside Fence Head Assembly
T-Square Type Fence System
Recessed Screw Holding Table Insert
Model G0690/G0691 (Mfg. 11/10+) -7-
The information contained herein is deemed accurate as of 8/16/2011 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3Model G0691
0$&+,1('$7$
6+((7
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
02'(/*+39&$%,1(77$%/(6$::,7+
/21*5$,/65,9,1*.1,)(
Product Dimensions:
Weight.............................................................................................................................................................. 546 lbs.
Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 82 x 41 x 40 in.
Footprint (Length x Width)............................................................................................................................ 20 x 20 in.
Shipping Dimensions:
Carton #1
Type.............................................................................................................................. Cardboard/Wood Skids
Content................................................................................................................................................. Machine
Weight.................................................................................................................................................... 481 lbs.
Length x Width x Height............................................................................................................. 33 x 30 x 40 in.
Carton #2
Type................................................................................................................................................... Cardboard
Content..................................................................................................................................................... Fence
Weight...................................................................................................................................................... 27 lbs.
Length x Width x Height............................................................................................................... 42 x 17 x 7 in.
Carton #3
Type................................................................................................................................................... Cardboard
Content....................................................................................................................................................... Rails
Weight...................................................................................................................................................... 71 lbs.
Length x Width x Height................................................................................................................. 92 x 7 x 5 in.
Electrical:
Minimum Circuit Size.............................................................................................................................................. 20A
Switch...................................................................................................... Magnetic with Thermal Overload Protection
Switch Voltage..................................................................................................................................................... 220V
Cord Length............................................................................................................................................................ 6 ft.
Cord Gauge................................................................................................................................................... 14 gauge
Plug Included.......................................................................................................................................................... Yes
Included Plug Type.................................................................................................................................... NEMA 6-20
Motors:
Main
Type.................................................................................................................. TEFC Capacitor Start Induction
Horsepower................................................................................................................................................ 3 HP
Voltage....................................................................................................................................................... 220V
Phase....................................................................................................................................................... Single
Amps......................................................................................................................................................... 12.8A
Speed................................................................................................................................................ 3450 RPM
Cycle......................................................................................................................................................... 60 Hz
Number of Speeds............................................................................................................................................ 1
Power Transfer ..................................................................................................................... Triple V-Belt Drive
Bearings....................................................................................................... Shielded and Permanently Sealed
The information contained herein is deemed accurate as of 3/7/2011 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 3Model G0691
Main Specifications:
Blade Information
Maximum Blade Diameter......................................................................................................................... 10 in.
Maximum Width of Dado...................................................................................................................... 13/16 in.
Blade Tilt...................................................................................................................................... Left 0-45 deg.
Arbor Size................................................................................................................................................. 5/8 in.
Arbor Speed...................................................................................................................................... 4300 RPM
Arbor Bearings.......................................................................................... Sealed and Permanently Lubricated
Cutting Capacities
Maximum Depth of Cut At 90 Degrees.................................................................................................. 3-1/8 in.
Maximum Depth of Cut At 45 Degrees................................................................................................ 2-3/16 in.
Maximum Rip To Right of Blade-Standard................................................................................................ 50 in.
Maximum Rip To Left of Blade.................................................................................................................. 12 in.
Table Information
Floor To Table Height................................................................................................................................ 34 in.
Table Size Width........................................................................................................................................ 20 in.
Table Size Depth....................................................................................................................................... 27 in.
Table Size Thickness............................................................................................................................ 1-1/2 in.
Table Size With Extension Wings Width............................................................................................. 74-3/4 in.
Distance Front of Table To Center Of Blade....................................................................................... 17-1/4 in.
Distance Front of Table To Blade At Maximum Cut............................................................................ 12-1/4 in.
Extension Table Size Width................................................................................................................. 34-3/4 in.
Fence Information
Fence Type.................................................................................... Camlock T-Shaped Fence with HDPE Face
Fence Size Length..................................................................................................................................... 48 in.
Fence Size Width.................................................................................................................................. 4-1/8 in.
Fence Size Height................................................................................................................................. 2-1/2 in.
Fence Rail Type................................................................................................................. Square Steel Tubing
Fence Rail Length...................................................................................................................................... 62 in.
Fence Rail Width................................................................................................................................... 2-3/4 in.
Fence Rail Height........................................................................................................................................ 2 in.
Miter Gauge Information
Miter Gauge Slot Type.............................................................................................................................. T-Slot
Miter Gauge Slot Size Width..................................................................................................................... 3/4 in.
Miter Gauge Slot Size Height................................................................................................................... 3/8 in.
Construction
Table....................................................................................................................... Precision Ground Cast Iron
Wings...................................................................................................................... Precision Ground Cast Iron
Trunnions............................................................................................................................................. Cast Iron
Base....................................................................................................................................... Pre-Formed Steel
Body Assembly...................................................................................................................... Pre-Formed Steel
Fence Assembly................................................................................................... Steel with HDPE Side Plates
Rails........................................................................................................................................................... Steel
Miter Guage.................................................................................................................. Cast Iron with Steel Bar
Guard....................................................................................................................................... Steel and Plastic
Other Related Information
Paint........................................................................................................................................... Powder Coated
Number of Dust Ports....................................................................................................................................... 1
Dust Port Size.............................................................................................................................................. 4 in.
Mobile Base........................................................................................................................................... G7314Z
The information contained herein is deemed accurate as of 3/7/2011 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 3 OF 3Model G0691
Other Specifications:
ISO Factory .................................................................................................................................................. ISO 9001
Country Of Origin ............................................................................................................................................... China
Warranty ............................................................................................................................................................ 1 Year
Serial Number Location ............................................................................................................... ID Label on Cabinet
Assembly Time ................................................................................................................................................. 1 Hour
Features:
Leeson Motor
Precision Ground Cast Iron Table
Cast Iron Trunnions
4" Dust Port
T-Slot Miter Gauge
Riving Knife and Blade Guard
Camlock T-Shaped Fence with HDPE Face
Quick-Release Device for Changing Guard/Riving Knife
Powder Coated Paint
Standard and Dado Table Inserts
Quick Release Riving Knife
Quick Release Motor Guard
Quick Release Splitter Assembly
Easy Glide Fence System
Knurled Knobs for Adjusting Fence
Nylon Runners Inside Fence Head Assembly
T-Square Type Fence System
Recessed Screw Holding Table Insert
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions.
This manual uses a series of symbols and signal words intended to convey the level of impor-
tance of the safety messages. The progression of symbols is described below. Remember that
safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
WEARING PROPER APPAREL. 9d cdi lZVg
Xadi]^c\! VeeVgZa! dg _ZlZagn i]Vi XVc WZXdbZ
ZciVc\aZY ^c bdk^c\ eVgih# 6alVnh i^Z WVX` dg
XdkZgadc\]V^g#LZVg cdc"ha^e[ddilZVgidVkd^Y
VXX^YZciVaha^ehl]^X]XdjaYXVjhZVadhhd[ldg`"
e^ZXZXdcigda#
HEARING PROTECTION. 6alVnh lZVg ]ZVg"
^c\egdiZXi^dcl]ZcdeZgVi^c\dgdWhZgk^^c\adjY
bVX]^cZgn# :miZcYZY ZmedhjgZ id i]^h cd^hZ
l^i]dji]ZVg^c\egdiZXi^dcXVc XVjhZ eZgbVcZci
]ZVg^c\adhh#
MENTAL ALERTNESS. 7Z bZciVaan VaZgi l]Zc
gjcc^c\ bVX]^cZgn# CZkZg deZgViZ jcYZg i]Z
^c[ajZcXZd[Ygj\hdgVaXd]da!l]Zci^gZY!dgl]Zc
Y^higVXiZY#
OWNER’S MANUAL. GZVY VcY jcYZghiVcY
i]^h dlcZg»h bVcjVa 7:;DG: jh^c\ bVX]^cZ#
JcigV^cZYjhZghXVcWZhZg^djhan]jgi#
EYE PROTECTION.6alVnhlZVg6CH>"VeegdkZY
hV[Zin\aVhhZhdgV[VXZh]^ZaYl]ZcdeZgVi^c\dg
dWhZgk^c\ bVX]^cZgn id gZYjXZ i]Z g^h` d[ ZnZ
^c_jgndgWa^cYcZhh[gdb[an^c\eVgi^XaZh#:kZgnYVn
ZnZ\aVhhZhVgZcdiVeegdkZYhV[Zin\aVhhZh#
HAZARDOUS DUST. 9jhi XgZViZY l]^aZ jh^c\
bVX]^cZgn bVn XVjhZ XVcXZg! W^gi] YZ[ZXih! dg
adc\"iZgb gZhe^gVidgn YVbV\Z# 7Z VlVgZ d[ Yjhi
]VoVgYhVhhdX^ViZYl^i]ZVX]ldg`e^ZXZbViZg^Va!
VcYValVnhlZVgVC>DH="VeegdkZYgZhe^gVidgid
gZYjXZndjgg^h`#
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
This symbol is used to alert the user to useful information about
proper operation of the machine.
NOTICE
Safety Instructions for Machinery
SECTION 1: SAFETY
DISCONNECTING POWER SUPPLY.6alVnhY^h"
XdccZXi bVX]^cZ [gdb edlZg hjeean WZ[dgZ hZg"
k^X^c\! VY_jhi^c\! dg X]Vc\^c\ Xjii^c\ iddah W^ih!
WaVYZh!XjiiZgh! ZiX## BV`ZhjgZ hl^iX] ^h^c D;;
edh^i^dcWZ[dgZgZXdccZXi^c\idVkd^YVcjcZmeZXi"
ZYdgjc^ciZci^dcVahiVgi#
APPROVED OPERATION. JcigV^cZY deZgVidgh
XVc WZ hZg^djhan ]jgi Wn bVX]^cZgn# Dcan Vaadl
igV^cZY dg egdeZgan hjeZgk^hZY eZdeaZ id jhZ
bVX]^cZ# L]Zc bVX]^cZ ^h cdi WZ^c\ jhZY! Y^h"
XdccZXi edlZg! gZbdkZ hl^iX] `Znh! dg adX`"dji
bVX]^cZidegZkZcijcVji]dg^oZYjhZ·ZheZX^Vaan
VgdjcYX]^aYgZc#BV`Zldg`h]de`^Yegdd[
DANGEROUS ENVIRONMENTS. 9dcdijhZ
bVX]^cZgn ^c lZi dg gV^cn adXVi^dch! XajiiZgZY
VgZVh! VgdjcY [aVbbVWaZh! dg ^c eddgan"a^i VgZVh#
@ZZe ldg` VgZV XaZVc! Ygn! VcY lZaa"a^\]iZY id
b^c^b^oZg^h`d[^c_jgn#
ONLY USE AS INTENDED. Dcan jhZ bVX]^cZ
[dg ^ih ^ciZcYZY ejgedhZ# CZkZg bdY^[n dg VaiZg
bVX]^cZ[dgVejgedhZcdi^ciZcYZYWni]ZbVcj"
[VXijgZgdghZg^djh^c_jgnbVngZhjai
USE RECOMMENDED ACCESSORIES.8dchjai
i]^hdlcZg»hbVcjVadgi]ZbVcj[VXijgZg[dggZX"
dbbZcYZY VXXZhhdg^Zh# Jh^c\ ^begdeZg VXXZh"
hdg^Zhl^aa^cXgZVhZi]Zg^h`d[hZg^djh^c_jgn#
CHILDREN & BYSTANDERS. @ZZeX]^aYgZc
VcYWnhiVcYZghVhV[ZY^hiVcXZVlVn[gdbldg`
VgZV#Hidejh^c\bVX]^cZ^[X]^aYgZcdgWnhiVcY"
ZghWZXdbZVY^higVXi^dc#
REMOVE ADJUSTING TOOLS.CZkZgaZVkZ
VY_jhibZciiddah!X]jX``Znh!lgZcX]Zh!ZiX#^cdg
dcbVX]^cZ·ZheZX^VaancZVgbdk^c\eVgih#KZg^[n
gZbdkVaWZ[dgZhiVgi^c\
SECURING WORKPIECE. L]Zc gZfj^gZY! jhZ
XaVbehdgk^hZhidhZXjgZldg`e^ZXZ#6 hZXjgZY
ldg`e^ZXZegdiZXih]VcYhVcY[gZZhWdi]d[i]Zb
iddeZgViZi]ZbVX]^cZ#
FEED DIRECTION.JcaZhhdi]Zgl^hZcdiZY![ZZY
ldg` V\V^chi i]Z gdiVi^dc d[ WaVYZh dg XjiiZgh#
;ZZY^c\^ci]ZhVbZY^gZXi^dcd[gdiVi^dcbVnejaa
ndjg]VcY^cidi]ZXji#
FORCING MACHINERY.9dcdi[dgXZbVX]^cZ#
>il^aa Yd i]Z _dWhV[Zg VcY WZiiZg Vii]Z gViZ [dg
l]^X]^ilVhYZh^\cZY#
GUARDS & COVERS. <jVgYh VcY XdkZgh XVc
egdiZXi ndj [gdb VXX^YZciVa XdciVXi l^i] bdk^c\
eVgih dg [an^c\ YZWg^h# BV`Z hjgZ i]Zn VgZ egde"
Zgan^chiVaaZY!jcYVbV\ZY!VcYldg`^c\XdggZXian
WZ[dgZjh^c\bVX]^cZ#
NEVER STAND ON MACHINE.HZg^djh^c_jgndg
VXX^YZciVa XdciVXi l^i] Xjii^c\ idda bVn dXXjg ^[
bVX]^cZ^hi^eeZY#BVX]^cZbVnWZYVbV\ZY#
STABLE MACHINE. JcZmeZXiZYbdkZbZciYjg"
^c\deZgVi^dch\gZVian^cXgZVhZhi]Zg^h`d[^c_jgn
VcY adhh d[ Xdcigda# KZg^[n bVX]^cZh VgZ hiVWaZ$
hZXjgZ VcY bdW^aZ WVhZh ^[ jhZY VgZ adX`ZY
WZ[dgZhiVgi^c\#
AWKWARD POSITIONS. @ZZe egdeZg [ddi^c\
VcYWVaVcXZViVaai^bZhl]ZcdeZgVi^c\bVX]^cZ#
9dcdidkZggZVX]6kd^YVl`lVgY]VcYedh^i^dch
i]Vi bV`Z ldg`e^ZXZ Xdcigda Y^[[^Xjai dg ^cXgZVhZ
i]Zg^h`d[VXX^YZciVa^c_jgn#
UNATTENDED OPERATION. CZkZgaZVkZ
bVX]^cZgjcc^c\l]^aZjcViiZcYZY#IjgcbVX]^cZ
OFFVcYZchjgZVaabdk^c\eVgihXdbeaZiZanhide
WZ[dgZlVa`^c\VlVn#
MAINTAIN WITH CARE.;daadlVaabV^ciZcVcXZ
^chigjXi^dch VcY ajWg^XVi^dc hX]ZYjaZh id `ZZe
bVX]^cZ^c\ddYldg`^c\XdcY^i^dc#6c^begdeZgan
bV^ciV^cZYbVX]^cZbVn^cXgZVhZi]Zg^h`d[hZg^"
djh^c_jgn#
CHECK DAMAGED PARTS. GZ\jaVgan ^cheZXi
bVX]^cZ [dg YVbV\ZY eVgih! addhZ Wdaih! b^h"
VY_jhiZY dg b^h"Va^\cZY eVgih! W^cY^c\! dg Vcn
di]Zg XdcY^i^dch i]Vi bVn V[[ZXi hV[Z deZgVi^dc#
6alVnhgZeV^gdggZeaVXZYVbV\ZYdgb^h"VY_jhi"
ZYeVgihWZ[dgZdeZgVi^c\bVX]^cZ#
EXPERIENCING DIFFICULTIES. >[ViVcni^bZ
ndjVgZ ZmeZg^ZcX^c\ Y^[[^Xjai^Zh eZg[dgb^c\ i]Z
^ciZcYZY deZgVi^dc!hidejh^c\i]ZbVX]^cZ
8dciVXidjg IZX]c^XVa Hjeedgi 9ZeVgibZci Vi
*,%*)+".++(#
Additional Safety for Table Saws
HAND POSITIONING. CZkZg ejgedhZan idjX] V
hVl WaVYZ Yjg^c\ deZgVi^dc# 6alVnh `ZZe ]VcYh$
[^c\Zgh dji d[ i]Z WaVYZ eVi]0 eaVXZ i]Zb l]ZgZ
i]ZnXVccdiha^e^cidi]ZWaVYZVXX^YZciVaan#CZkZg
gZVX]VgdjcY!WZ]^cY!dgdkZgi]ZWaVYZ#IdjX]^c\
Vhe^cc^c\hVlWaVYZl^aaXVjhZhZg^djhaVXZgVi^dc
dgVbejiVi^dc^c_jg^Zh#
BLADE GUARD. JhZ i]Z WaVYZ \jVgY [dg Vaa
¸i]gdj\]Xjih¹[dgl]^X]^iXVcWZjhZY#6i]gdj\]
Xji^hVcdeZgVi^dcl]ZgZi]ZWaVYZXjihXdbeaZiZ"
an i]gdj\] i]Z ide d[ i]Z ldg`e^ZXZ# BV`Z hjgZ
i]ZWaVYZ\jVgY^h^chiVaaZYVcYVY_jhiZYXdggZXian0
egdbeian gZeV^g dg gZeaVXZ ^i ^[ YVbV\ZY# 6alVnh
gZ"^chiVaaWaVYZ\jVgY^bbZY^ViZanV[iZgdeZgVi^dch
i]Vi gZfj^gZ ^ih gZbdkVa# DeZgVi^c\ hVl l^i] i]Z
WaVYZ\jVgYgZbdkZY\gZVian^cXgZVhZhi]Zg^h`d[
hZkZgZaVXZgVi^dcdgVbejiVi^dc^c_jg^Zh[gdbVXX^"
YZciVaWaVYZXdciVXi#
RIVING KNIFE. JhZ i]Z g^k^c\ `c^[Z [dg Vaa ¸cdc"
i]gdj\] Xjih¹ [dg l]^X] ^i XVc WZ jhZY# 6 cdc"
i]gdj\]Xji^hVcdeZgVi^dcl]ZgZi]ZWaVYZYdZh
cdi Xji i]gdj\] i]Z ide d[ i]Z ldg`e^ZXZ# BV`Z
hjgZi]Zg^k^c\`c^[Z^hVa^\cZYVcYedh^i^dcZYXdg"
gZXian0VcYegdbeiangZeV^gdggZeaVXZ^i^[YVbV\ZY#
Jh^c\i]Zg^k^c\ `c^[Z^cXdggZXianl^aa^cXgZVhZi]Z
g^h`d[`^X`WVX`dgVXX^YZciVaWaVYZXdciVXi#
KICKBACK.@^X`WVX`dXXjghl]Zci]ZhVlWaVYZ
Z_ZXih i]Z ldg`e^ZXZ WVX` idlVgY i]Z deZgVidg#
@cdl]dlidgZYjXZi]Zg^h`d[`^X`WVX`!VcYaZVgc
]dlidegdiZXindjghZa[^[^iYdZhdXXjg#
FEEDING WORKPIECE. ;ZZY^c\ i]Z ldg`e^ZXZ
^cXdggZXian l^aa ^cXgZVhZ g^h` d[ `^X`WVX`# CZkZg
hiVgii]ZhVll^i]Vldg`e^ZXZidjX]^c\i]ZWaVYZ0
Vaadli]ZWaVYZidgZVX][jaaheZZYWZ[dgZXjii^c\#
Dcan [ZZY i]Z ldg`e^ZXZ V\V^chi i]Z Y^gZXi^dc d[
WaVYZ gdiVi^dc# 6alVnh jhZ hdbZ ineZ d[ \j^YZ
[ZcXZ! b^iZg \Vj\Z! ha^Y^c\ iVWaZ dg haZY! ZiX# id
[ZZYi]Zldg`e^ZXZ^cVhigV^\]ia^cZ#CZkZgWVX`V
ldg`e^ZXZdjid[VXjidgignidbdkZ^iWVX`lVgYh
dgh^YZlVnhV[iZghiVgi^c\VXji#;ZZYXjihVaai]Z
lVn i]gdj\] id XdbeaZi^dc# CZkZg eZg[dgb Vcn
deZgVi^dc¸[gZZ]VcY¹bV`^c\VXjil^i]djijh^c\V
[ZcXZ!b^iZg\Vj\Z!dgdi]Zg\j^YZ#
FENCE. BV`Z hjgZ i]Z [ZcXZ gZbV^ch egdeZgan
VY_jhiZYVcYeVgVaaZal^i] i]Z WaVYZ#6alVnhadX`
i]Z[ZcXZ^ceaVXZWZ[dgZjh^c\#Jh^c\dgVY_jhi^c\
i]Z[ZcXZ^cXdggZXianl^aa^cXgZVhZg^h`d[`^X`WVX`#
PUSH STICKS/BLOCKS.JhZejh]hi^X`hdgejh]
WadX`hl]ZcZkZgedhh^WaZid`ZZendjg]VcYh[Vg"
i]ZgVlVn[gdbi]ZWaVYZl]^aZXjii^c\0^ci]ZZkZci
d[VcVXX^YZcii]ZhZYZk^XZhl^aad[iZciV`ZYVb"
V\Zi]VildjaY]VkZ]VeeZcZYid]VcYh$[^c\Zgh#
CUT-OFF PIECES.CZkZgjhZndjg]VcYhidbdkZ
Xji"d[[hVlVn[gdbi]ZWaVYZl]^aZi]ZhVl^hgjc"
c^c\# >[ V Xji"d[[ WZXdbZh igVeeZY WZilZZc i]Z
WaVYZVcYiVWaZ^chZgi!ijgci]ZhVlOFFVcYVaadl
i]ZWaVYZidXdbeaZiZanhideWZ[dgZgZbdk^c\^i#
BLADE ADJUSTMENTS. 6Y_jhi^c\ i]Z WaVYZ
]Z^\]idgi^aiYjg^c\deZgVi^dc^cXgZVhZhi]Zg^h`d[
XgVh]^c\ i]Z WaVYZ VcY hZcY^c\ bZiVa [gV\bZcih
[an^c\l^i]YZVYan[dgXZVii]ZdeZgVidgdgWnhiVcY"
Zgh#DcanVY_jhii]ZWaVYZ]Z^\]iVcYi^ail]Zci]Z
WaVYZ^hXdbeaZiZanhideeZYVcYi]ZhVl^hOFF#
CHANGING BLADES. 6alVnh Y^hXdccZXi edlZg
WZ[dgZ X]Vc\^c\ WaVYZh# 8]Vc\^c\ WaVYZh l]^aZ
i]Z hVl ^h XdccZXiZY id edlZg \gZVian ^cXgZVhZh
i]Z^c_jgng^h`^[hVl^hVXX^YZciVaanedlZgZYje#
DAMAGED SAW BLADES. CZkZg jhZ WaVYZh
i]Vi ]VkZ WZZc YgdeeZY dg di]Zgl^hZ YVbV\ZY#
9VbV\ZYWaVYZhXVc[anVeVgiVcYhig^`Zi]ZdeZg"
Vidgl^i]h]VgYhd[bZiVa#
DADO AND RABBET OPERATIONS. 9D CDI
ViiZbei YVYd dg gVWWZi^c\ deZgVi^dch l^i]dji
[^ghi gZVY^c\ i]dhZ hZXi^dch ^c i]^h bVcjVa# 9VYd
VcYgVWWZi^c\deZgVi^dchgZfj^gZheZX^VaViiZci^dc
WZXVjhZ i]Zn bjhi WZ eZg[dgbZY l^i] i]Z WaVYZ
\jVgYgZbdkZY#
CUTTING CORRECT MATERIAL.CZkZg Xji
bViZg^Vahcdi^ciZcYZY[dgi]^hhVl0dcanXjicVijgVa
VcYbVc"bVYZlddY egdYjXih! aVb^cViZXdkZgZY
lddYegdYjXih!VcYhdbZeaVhi^Xh#8jii^c\bZiVa!
\aVhh!hidcZ!i^aZ!ZiX#^cXgZVhZhi]Zg^h`d[deZgVidg
^c_jgnYjZid`^X`WVX`dg[an^c\eVgi^XaZh#
Statistics show that most common acci-
dents among table saw users can be
linked to kickback. Kickback is typically
defined as the high-speed expulsion of
stock from the table saw toward its opera-
tor. In addition to the danger of the opera-
tor or others in the area being struck by
the flying stock, it is often the case that
the operator’s hands are pulled into the
blade during the kickback.
Below are tips to avoid the most common
causes of kickback:
Preventing Kickback
Even if you know how to prevent kickback, it
may still happen. Here are some tips to pro-
tect yourself if kickback DOES occur:
Protecting Yourself
From Kickback
-14- Model G0690/G0691 (Mfg. 11/10+)
The following is a list of common definitions, terms and phrases used throughout this manual as they relate
to this table saw and woodworking in general. Become familiar with these terms for assembling, adjusting
or operating this machine. Your safety is VERY important to us at Grizzly!
Arbor: A metal shaft extending from the drive
mechanism that is the mounting location for the
saw blade.
Bevel Edge Cut: A cut made with the blade tilted
to an angle between 0˚ and 45˚ to cut a beveled
edge onto a workpiece. Refer to Page 42 for
more details.
Blade Guard Assembly: Metal or plastic safety
device that mounts over the saw blade. Its func-
tion is to prevent the operator from coming into
contact with the saw blade. Refer to Page 37
for more details.
Crosscut: Cutting operation in which the cross-
cut fence is used to cut across the shortest
width of the workpiece. Refer to Page 41 for
more details.
Dado Blade: Blade or set of blades that are used
to cut grooves and rabbets. Refer to Page 59
for more details. The saw and arbor are not
intended to safely use a larger dado blade.
Dado Cut: Cutting operation that uses a dado
blade to cut a flat bottomed groove into the face
of the workpiece. Refer to Page 42 for more
details.
Featherboard: Safety device used to keep the
workpiece against the rip fence and against
the table surface. Refer to Page 50 for more
details.
Kerf: The resulting cut or gap in the workpiece
after the saw blade passes through during a
cutting operation.
Kickback: An event in which the workpiece is
propelled back towards the operator at a high
rate of speed.
Non-Through Cut: A cut in which the blade does
not cut through the top of the workpiece. Refer
to Page 33 for more details.
Parallel: Being an equal distance apart at every
point along two given lines or planes (i.e. the
rip fence face is parallel to the face of the saw
blade).
Perpendicular: Lines or planes that intersect and
form right angles (i.e. the blade is perpendicular
to the table surface).
Push Stick: Safety device used to push the
workpiece through a cutting operation. Used
most often when rip cutting thin workpieces.
Refer to Page 53 for more details.
Rabbet: Cutting operation that creates an L-shaped
channel along the edge of the workpiece. Refer
to Page 45 for more details.
Rip Cut: Cutting operation in which the rip fence
is used to cut across the widest width of the
workpiece. Refer to Page 40 for more details.
Riving Knife: Metal plate located behind the
blade. It maintains the kerf opening in the wood
when performing a cutting operation. Refer to
Page 39 for more details.
Straightedge: A tool used to check the flatness,
parallelism, or consistency of a surface(s).
Thin Kerf Blade: A blade with a kerf or thickness
that is thinner than a standard blade cannot be
used on this saw.
Through Cut: A cut in which the blade cuts com-
pletely through the workpiece. Refer to Page
33 for more details.
Glossary of Terms
SECTION 2: POWER SUPPLY
Availability
7Z[dgZ^chiVaa^c\i]ZbVX]^cZ!Xdch^YZgi]ZVkV^a"
VW^a^inVcYegdm^b^ind[i]ZgZfj^gZYedlZghjeean
X^gXj^i# >[ Vc Zm^hi^c\ X^gXj^i YdZh cdi bZZi i]Z
gZfj^gZbZcih[dgi]^hbVX]^cZ!VcZlX^gXj^ibjhi
WZ ^chiVaaZY# Id b^c^b^oZ i]Z g^h` d[ ZaZXigdXj"
i^dc![^gZ!dgZfj^ebZciYVbV\Z!^chiVaaVi^dcldg`
VcYZaZXig^XVal^g^c\bjhiWZYdcZWnVfjVa^[^ZY
ZaZXig^X^Vc^cVXXdgYVcXZl^i]VaaVeea^XVWaZXdYZh
VcYhiVcYVgYh#
Electrocution, fire, or
equipment damage may
occur if machine is not
correctly grounded and
connected to the power
supply.
Full-Load Current Rating
I]Z [jaa"adVY XjggZci gVi^c\ ^h i]Z VbeZgV\Z V
bVX]^cZYgVlhVi&%%d[i]ZgViZYdjiejiedlZg#
Dc bVX]^cZh l^i] bjai^eaZ bdidgh! i]^h ^h i]Z
VbeZgV\ZYgVlcWni]ZaVg\Zhibdidgdghjbd[Vaa
bdidghVcYZaZXig^XVaYZk^XZhi]Vib^\]ideZgViZ
VidcZi^bZYjg^c\cdgbVadeZgVi^dch#
Full-Load Current Rating at 220V .. 12.8 Amps
I]Z[jaa"adVYXjggZci^hcdii]ZbVm^bjbVbdjci
d[Vbehi]Vii]ZbVX]^cZl^aaYgVl#>[i]ZbVX]^cZ
^hdkZgadVYZY!^il^aaYgVlVYY^i^dcVaVbehWZndcY
i]Z[jaa"adVYgVi^c\#
>[i]ZbVX]^cZ^hdkZgadVYZY[dgVhj[[^X^ZciaZc\i]
d[i^bZ!YVbV\Z!dkZg]ZVi^c\!dg[^gZbVngZhjai·
ZheZX^Vaan ^[ XdccZXiZY id Vc jcYZgh^oZY X^gXj^i#
Id gZYjXZ i]Z g^h` d[ i]ZhZ ]VoVgYh!Vkd^YdkZg"
adVY^c\ i]Z bVX]^cZ Yjg^c\ deZgVi^dc VcY bV`Z
hjgZ^i^hXdccZXiZYidVedlZghjeeanX^gXj^ii]Vi
bZZihi]ZgZfj^gZbZcih^ci]Z[daadl^c\hZXi^dc#
For your own safety and protection of
property, consult a qualified electrician if
you are unsure about wiring practices or
electrical codes in your area.
Note: The circuit requirements listed in this man-
ual apply to a dedicated circuit—where only one
machine will be running at a time. If this machine
will be connected to a shared circuit where mul-
tiple machines will be running at the same time,
consult a qualified electrician to ensure that the
circuit is properly sized for safe operation.
6 edlZg hjeean X^gXj^i ^cXajYZh Vaa ZaZXig^XVa
Zfj^ebZciWZilZZci]ZWgZV`ZgWdmdg[jhZeVcZa
^ci]ZWj^aY^c\VcYi]ZbVX]^cZ#I]ZedlZghje"
eanX^gXj^ijhZY[dgi]^hbVX]^cZbjhiWZh^oZYid
hV[Zan]VcYaZi]Z[jaa"adVYXjggZciYgVlc[gdbi]Z
bVX]^cZ [dg Vc ZmiZcYZY eZg^dY d[ i^bZ# >[ i]^h
bVX]^cZ ^h XdccZXiZY id V X^gXj^i egdiZXiZY Wn
[jhZh!jhZVi^bZYZaVn[jhZbVg`ZY9#
Circuit Information
Circuit Requirements for 220V
I]^h bVX]^cZ ^h egZl^gZY id deZgViZ dc V ''%K
edlZghjeeanX^gXj^ii]Vi]VhVkZg^[^ZY\gdjcYVcY
bZZihi]Z[daadl^c\gZfj^gZbZcih/
Nominal Voltage .............................. 220V/240V
Cycle ..........................................................60 Hz
Phase........................................... Single-Phase
Circuit Rating...................................... 20 Amps
Plug/Receptacle ............................. NEMA 6-20
Extension Cords
LZ Yd cdi gZXdbbZcY jh^c\ Vc ZmiZch^dc XdgY
l^i] i]^h bVX]^cZ# >[ ndj bjhi jhZ Vc ZmiZch^dc
XdgY!dcanjhZ^i^[VWhdajiZancZXZhhVgnVcYdcan
dcViZbedgVgnWVh^h#
:miZch^dc XdgYh XVjhZ kdaiV\Z Ygde! l]^X] bVn
YVbV\ZZaZXig^XVaXdbedcZcihVcYh]dgiZcbdidg
a^[Z#KdaiV\ZYgde^cXgZVhZhVhi]ZZmiZch^dcXdgY
h^oZ\Zihadc\ZgVcYi]Z\Vj\Zh^oZ\ZihhbVaaZg
]^\]Zg\Vj\ZcjbWZgh^cY^XViZhbVaaZgh^oZh#
6cnZmiZch^dcXdgYjhZYl^i]i]^hbVX]^cZbjhi
XdciV^c V \gdjcY l^gZ! bViX] i]Z gZfj^gZY eaj\
VcY gZXZeiVXaZ! VcY bZZi i]Z [daadl^c\ gZfj^gZ"
bZcih/
Minimum Gauge Size ...........................12 AWG
Maximum Length (Shorter is Better).......50 ft.
Grounding Instructions
I]^h bVX]^cZ BJHI WZ \gdjcYZY# >c i]Z ZkZci
d[XZgiV^cbVa[jcXi^dchdgWgZV`Ydlch!\gdjcY^c\
gZYjXZhi]Zg^h`d[ZaZXig^Xh]dX`Wnegdk^Y^c\V
eVi]d[aZVhigZh^hiVcXZ[dgZaZXig^XXjggZci#
>begdeZgXdccZXi^dcd[i]ZZfj^ebZci"\gdjcY^c\
l^gZ XVc gZhjai ^c V g^h` d[ ZaZXig^X h]dX`# I]Z
l^gZl^i]\gZZc^chjaVi^dcl^i]dgl^i]djinZaadl
hig^eZh^hi]ZZfj^ebZci"\gdjcY^c\l^gZ#>[gZeV^g
dggZeaVXZbZcid[i]ZedlZgXdgYdgeaj\^hcZX"
ZhhVgn!YdcdiXdccZXii]ZZfj^ebZci"\gdjcY^c\
l^gZidVa^kZXjggZciXVggn^c\iZgb^cVa#
8]ZX`l^i]VfjVa^[^ZYZaZXig^X^VcdghZgk^XZeZg"
hdccZa^[ndjYdcdijcYZghiVcYi]ZhZ\gdjcY^c\
gZfj^gZbZcih!dg^[ndjVgZ^cYdjWiVWdjil]Zi]Zg
i]Z idda ^h egdeZgan \gdjcYZY# >[ ndj ZkZg cdi^XZ
i]ViVXdgYdgeaj\^hYVbV\ZYdgldgc! Y^hXdc"
cZXi^i[gdbedlZg!VcY^bbZY^ViZangZeaVXZ^il^i]
VcZldcZ#
I]^hbVX]^cZ^hZfj^eeZYl^i]VedlZgXdgYi]Vi
]VhVcZfj^ebZci"\gdjcY^c\l^gZVcYV\gdjcY"
^c\ eaj\ h^b^aVg id i]Z [^\jgZ WZadl# I]Z eaj\
bjhidcanWZ^chZgiZY^cidVbViX]^c\gZXZeiVXaZ
djiaZii]Vi^hegdeZgan^chiVaaZYVcY\gdjcYZY^c
VXXdgYVcXZl^i]VaaadXVaXdYZhVcYdgY^cVcXZh#
No adapter should be used with the
provided plug. If the plug does not fit the
available receptacle, or the machine must
be reconnected for use on a different type
of circuit, the reconnection must be made
by a qualified electrician and comply with all
local codes and ordinances.
Serious injury could occur if you connect
the machine to power before completing the
setup process. DO NOT connect to power
until instructed later in this manual.
Figure 4.
<gdjcY^c\Egdc\
8jggZci8Vggn^c\Egdc\h
6-20 PLUG
GROUNDED
6-20 RECEPTACLE
SECTION 3: SETUP
Description Qty
Items Needed for
Setup
Ndjg bVX]^cZ lVh XVgZ[jaan eVX`V\ZY [dg hV[Z
igVchedgiVi^dc# GZbdkZ i]Z eVX`V\^c\ bViZg^Vah
[gdb VgdjcY ndjg bVX]^cZ VcY ^cheZXi ^i# >[ ndj
Y^hXdkZgVcnYVbV\Z! please call us immediately
at (570) 546-9663for advice.
HVkZi]ZXdciV^cZghVcYVaaeVX`^c\bViZg^Vah[dg
edhh^WaZ ^cheZXi^dc Wn i]Z XVgg^Zg dg ^ih V\Zci#
Otherwise, filing a freight claim can be difficult.
L]ZcndjVgZXdbeaZiZanhVi^h[^ZYl^i]i]ZXdcY^"
i^dcd[ndjgh]^ebZci!^ckZcidgni]ZXdciZcih#
Unpacking
Lifting heavy machinery
or parts without proper
assistance or equipment
may result in strains, back
injuries, crushing injuries,
or property damage.
To reduce the risk of serious
injury, read and understand
this entire document before
using the machine!
Hardware Recognition Chart
Other manuals for G0690
3
This manual suits for next models
1
Table of contents
Other Grizzly Saw manuals
Grizzly
Grizzly EXTREME G0513X2 User manual
Grizzly
Grizzly G0591 User manual
Grizzly
Grizzly G0513P User manual
Grizzly
Grizzly G4227 User manual
Grizzly
Grizzly G0461 User manual
Grizzly
Grizzly EXTREME G0513X2B User manual
Grizzly
Grizzly G1538 User manual
Grizzly
Grizzly G0732 User manual
Grizzly
Grizzly G0503 User manual
Grizzly
Grizzly G1148 User manual
Grizzly
Grizzly G9743 User manual
Grizzly
Grizzly H8145 Quick start guide
Grizzly
Grizzly EXTREME G0513X Quick start guide
Grizzly
Grizzly G0502 User manual
Grizzly
Grizzly G4186Z User manual
Grizzly
Grizzly G1023S User manual
Grizzly
Grizzly G1023SL Series User manual
Grizzly
Grizzly G0622 User manual
Grizzly
Grizzly G0555LX User manual
Grizzly
Grizzly G0734 User manual
